Home > Epson > Projector > Epson Projector Emp S5 User Manual

Epson Projector Emp S5 User Manual

    Download as PDF Print this page Share this page

    Have a look at the manual Epson Projector Emp S5 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1734 Epson manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							1
    Users Guide 
    						
    							2
    Notations Used in This GuidefSafety Indications
    So that you can use the projector safely and correctly, symbols are applied in the documentation and on the projector to indicate possible harm to the user or 
    to others and the risk of damage to property. 
    The indications and their meaning are as follows. Make sure you understand them properly before reading the guide. 
    fGeneral Information Indications
     Wa r nin g
    Indicates the possibility of death or serious injury if this symbol is ignored or if sufficient care is not taken.
     Caution
    Indicates the possibility of injury or damage to property if this symbol is ignored or if sufficient care is not taken.
    Attention
    Indicates procedures which may result in damage or injury if sufficient care is not taken.
    q
    Indicates additional information and points which may be useful to know regarding a topic.
    s
    Indicates a page where detailed information regarding a topic can be found. 
    g
    Indicates that an explanation of the underlined word or words in front of this symbol appears in the glossary of terms. See 
    the Glossary section of the Appendices. sp.65Indicates operating methods and the order of operations. 
    The procedure indicated should be carried out in the order of the numbered steps. 
    [ (Name) ]
    Indicates the name of the buttons on the remote control or the control panel. 
    Example: [Esc] button
    (Menu Name)
    Indicates configuration menu items. 
    Example: Image - BrightnessIndicates that the explanation continues on the following page. Clicking this symbol will display the following page.Indicates that the explanation is continued from the previous page. Clicking this symbol will display the previous page.
    Procedure 
    						
    							3
    ContentsProjector Features ......................................................................................4
    Part Names and Functions ........................................................................5
    Front/Top.............................................................................................................. 5
    Rear (EMP-83/822 Only)...................................................................................... 6
    Rear (EMP-X5/S5 Only) ....................................................................................... 7
    Control Panel ....................................................................................................... 8
    Remote Control .................................................................................................. 10
    Base ................................................................................................................... 11
    Useful FunctionsChanging the Projected Image (Source Search) ...................................13
    Functions for Enhancing Projection.......................................................14
    Selecting the Projection Quality (Selecting Color Mode) ................................... 14
    Hiding the Image and Sound Temporarily (A/V Mute) ....................................... 15
    Freezing the Image (Freeze).............................................................................. 16
    Changing the Aspect Ratio (Aspect) .................................................................. 16
    Enlarging Part of the Image (E-Zoom) ............................................................... 17
    Security Functions ...................................................................................18
    Managing Users (Password Protect) ................................................................. 18
    Restricting Operation (Operation Lock).............................................................. 20
    Anti-Theft Lock ................................................................................................... 21
    Configuration MenuUsing the Configuration Menu ................................................................23
    List of Functions.......................................................................................24
    Image Menu (EMP-83/822 Only) ....................................................................... 24
    Image Menu (EMP-X5/S5 Only)......................................................................... 25
    Signal Menu (EMP-83/822 Only) ....................................................................... 26
    Signal Menu (EMP-X5/S5 Only)......................................................................... 27
    Settings Menu .................................................................................................... 28
    Extended Menu .................................................................................................. 29
    Network Menu (EMP-83/822 Only) .................................................................... 31
    Info Menu (Display Only).................................................................................... 34
    Reset Menu ........................................................................................................ 35
    TroubleshootingUsing the Help ..........................................................................................37
    Problem Solving .......................................................................................38
    Reading the Indicators ....................................................................................... 38
    When the Indicators Provide No Help ................................................................ 41
    AppendicesInstallation Methods ................................................................................ 49
    Cleaning .................................................................................................... 50
    Cleaning the Projectors Surface ....................................................................... 50
    Cleaning the Lens .............................................................................................. 50
    Cleaning the Air Filter and Air Intake Vent......................................................... 50
    Replacing Consumables ......................................................................... 51
    Replacing the Remote Control Batteries ........................................................... 51
    Replacing the Lamp ........................................................................................... 52
    Replacing the Air Filter ...................................................................................... 56
    Saving a Users Logo ............................................................................... 57
    Screen Size and Distance........................................................................ 59
    EMP-83/822/X5 ................................................................................................. 59
    EMP-S5 ............................................................................................................. 60
    Connecting to External Equipment ........................................................ 61
    Connecting to an External Monitor .................................................................... 61
    Connecting to External Speakers (EMP-83/822 Only) ...................................... 61
    Connecting a LAN Cable (EMP-83/822 Only) ......................................... 62
    Connecting a USB Cable (EMP-X5/S5 Only) .......................................... 63
    Optional Accessories and Consumables .............................................. 64
    Glossary .................................................................................................... 65
    ESC/VP21 Commands ............................................................................. 67
    Command List.................................................................................................... 67
    Cable Layouts .................................................................................................... 67
    Connecting a USB (EMP-X5/S5 Only)............................................................... 68
    USB Connection Setup ...................................................................................... 68
    PJLink (EMP-83/822 Only) ....................................................................... 69
    List of Supported Monitor Displays ....................................................... 70
    Specifications ........................................................................................... 71
    Appearance............................................................................................... 75
    Index .......................................................................................................... 76 
    						
    							4
    Projector Features
    f
    The A/V mute slide makes it easy to project and store
    You can stop and resume projection 
    easily by opening and closing the A/V 
    mute slide which makes giving clear 
    presentations easier. 
    f
    A single foot design means you do not have to make any difficult 
    levelling adjustments
    You can easily make height 
    adjustments with one hand.
     sQuick Start Guidef
    Password Protect to restrict and manage users
    By setting a password you can restrict who can use the projector. 
    s
    p.18
    f
    Operation Lock restricts button operation on the control panel
    You can use this to prevent people from changing projector settings 
    without permission at events, in schools, and so on. 
    s
    p.20
    f
    Equipped with various anti-theft devices
    The projector is equipped with the following security devices. 
    s
    p.21
    • Security slot
     Security cable installation point
    f
    Direct power On/Off (EMP-83/822 only)
    In places where power is managed centrally, such as in a conference 
    room, the projector can be set to power on and off automatically when the 
    power source to which the projector is connected is switched on or off.
    f
    No cool down delay
    After turning the projectors power off, you can disconnect the projectors 
    power cable without having to wait for the projector to cool down first.
    Ease of use
    Enhanced security functionsEasy to handle 
    						
    							5
    Part Names and FunctionsFront/Top
    Name
    Function
    A
    Control panel
    sp.8
    B
    Lamp cover
    Open this cover when replacing the projectors 
    lamp. sp.53
    C
    Air exhaust vent
     Caution
    Do not place objects that may become warped 
    or otherwise affected by heat near the air 
    exhaust vent and do not put your face or 
    hands near the air exhaust vent while 
    projection is in progress.
    F C AK
    B
    J
    GEDH I
    D
    Front adjustable 
    feet
    Extend and adjust the position of the projected 
    image when the projector is placed on a 
    surface such as a desk. sQuick Start Guide
    E
    Foot adjust lever
    Pull out the foot lever to extend and retract the 
    front foot. sQuick Start Guide
    F
    A/V mute slide
    Slide shut when not using the projector to 
    protect the lens. By closing during projection 
    you can hide the image and the sound (A/V 
    Mute). sQuick Start Guide,  p.15
    G
    Remote receiver
    Receives signals from the remote control. 
    sQuick Start Guide
    H
    Focus ring
    Adjusts the image focus. sQuick Start Guide
    I
    Zoom ring
    (EMP-83/822/X5 
    only)
    Adjusts the image size. sQuick Start Guide
    J
    A/V mute slide 
    knob
    Slide the knob to open and close the A/V mute 
    slide.
    K
    Security slot (j)
    The security slot is compatible with the 
    Microsaver Security System manufactured by 
    Kensington. sp.21
    Name
    Function 
    						
    							Part Names and Functions
    6
    Rear (EMP-83/822 Only)
    Name
    Function
    A
    Remote receiver
    Receives signals from the remote control. 
    sQuick Start Guide
    B
    Speaker
    C
    Monitor Out port
    Outputs the image signal from the computer 
    connected to the Computer1 input port to an 
    external monitor. This is not available for 
    component video
    g signals or other signals 
    being input to any port other than the 
    Computer1 input port.sp.61
    Audio Out port
    Outputs the sound of the image currently being 
    projected to external speakers. sp.61
    D
    Power inlet
    Connects to the power cable. 
    sQuick Start Guide
    E DF HG A
    BC
    E
    RS-232C port
    When controlling the projector from a 
    computer, connect it to the computer with an 
    RS-232C cable. This port is for control use and 
    should not normally be used.  sp.67
    F
    Computer1 input 
    port
    For video signals from a computer and 
    component video
    g signals from other video 
    sources.
    Audio1 input port
    Connect to the audio out port of the computer 
    connected to the Computer1 input port. 
    Computer2 input 
    port
    For video signals from a computer and 
    component video
    g signals from other video 
    sources.
    Audio2 input port
    Connect to the audio out port of the computer 
    connected to the Computer2 input port. 
    sQuick Start Guide
    G
    S-Video input 
    port
    For S-video
    g signals from video sources.
    Video input port
    For composite video
    g signals from video 
    sources.
    Audio-L/R input 
    port
    Connects to the audio out port of the 
    equipment connected to the S-Video port or 
    Video input port. sQuick Start Guide
    H
    LAN port
    When a LAN cable is connected, you can 
    monitor and control the projector over a LAN. 
    sp.62
    Name
    Function 
    						
    							Part Names and Functions
    7
    Rear (EMP-X5/S5 Only)
    * Limited to computers with the following operating systems installed.
    Windows 98/98SE/2000/Me/XP Home Edition/XP Professional
    Macintosh: OS 8.6 to 9.2/10.1 to 10.3
    Name
    Function
    A
    Remote receiver
    Receives signals from the remote control. 
    sQuick Start Guide
    B
    Speaker
    C
    Power inlet
    Connects to the power cable. 
    sQuick Start Guide
    D
    Monitor Out port
    Outputs the image signal from the computer 
    connected to the Computer input port to an 
    external monitor. This is not available for 
    component video
    g signals or other signals 
    being input to any port other than the 
    Computer input port.sp.61
    D
    CE G A
    BF IH
    E
    Computer input 
    port
    For video signals from a computer and 
    component video
    g signals from other video 
    sources.
    F
    Audio-L/R input 
    port
    Connects to the audio output port for the 
    equipment you want to project from and inputs 
    the audio. sQuick Start Guide
    G
    Video input port
    For composite video
    g signals from video 
    sources.
    H
    S-Video input 
    port
    For S-video
    g signals from video sources.
    I
    USB port (Type B)
    When showing a slide show in PowerPoint, 
    you can use the projectors remote control to 
    move to the next slide/previous slide if it is 
    connected to a computer by a USB cable.
    * 
    Also, you can use it as a control port when the 
    projector is controlled by a computer.
    Even if the projector is connected to a 
    computer by a USB cable, you cannot project 
    the image on the computer. sp.63
    Name
    Function 
    						
    							Part Names and Functions
    8
    Control PanelfEMP-83/822/X5
    fEMP-S5
    Buttons without numbers operate in the same way as in the figure above. 
    See the numbers in the table for the figure above.
    H
    CFE D A
    BG IJ
    Name
    Function
    A
    [Power] button
    Turns the projector power on or off. 
    sQuick Start Guide
    B
    Status indicators
    The color of the indicators and whether they 
    are flashing or lit indicates the status of the 
    projector. sp.38
    C
    [Source Search] 
    button
    Changes to the next input source that is 
    connected to the projector and is sending an 
    image.sp.13
    D
    [Enter] button
    If pressed during projection of computer signal 
    images, it automatically adjusts the tracking, 
    synchronization, and position to project the 
    optimum image.
    When a configuration menu or a help screen is 
    displayed, it accepts and enters the current 
    selection and moves to the next level.sp.23
    E
    [v] [w] buttons
    Corrects keystone distortion.
    If pressed when a configuration menu or a help 
    screen is displayed, these buttons select menu 
    items and setting values. 
    sQuick Start Guide, p.23
    F
    [Help] button
    Displays and closes the help screen which 
    shows you how to deal with problems if they 
    occur.sp.37
    G
    [Esc] button
    Stops the current function.
    If pressed when a configuration menu is 
    displayed, it moves to the previous menu 
    level.sp.23
    H
    [a] [b] buttons
    (EMP-83/822/X5 
    only)
    Press to adjust the volume.
    If pressed when a configuration menu or a help 
    screen is displayed, these buttons select menu 
    items and setting values.
    sQuick Start Guide, p.23 
    						
    							Part Names and Functions
    9
    I
    [Menu] button
    Displays and closes the configuration 
    menu.sp.23
    J
    [Wide] [Tele] 
    buttons 
    (EMP-S5 only)
    Adjusts the image size.
    If pressed when a configuration menu or a help 
    screen is displayed, these buttons select menu 
    items and setting values.
    sQuick Start Guide, p.23
    Name
    Function 
    						
    							Part Names and Functions
    10
    Remote Control
    Illustrations show EMP-X5/S5.
    Name
    Function
    A
    [Power] button
    Turns the projector power on or off.
     sQuick Start Guide
    B
    [Source Search] 
    button
    Changes to the next input source that is 
    connected to the projector and is sending an 
    image.sp.13
    B A
    K N
    H
    G C
    I D
    E
    FJ P
    L M O
    C
    [Menu] button
    Displays and closes the configuration menu. 
    sp.23
    D
    [Enter/Auto] 
    button
    If pressed during projection of computer signal 
    images, it automatically adjusts the tracking, 
    synchronization, and position to project the 
    optimum image. sp.26
    When a configuration menu or a help screen is 
    displayed, it accepts and enters the current 
    selection and moves to the next level.sp.23
    E
    [Color Mode] 
    button
    Each time the button is pressed, the color 
    mode changes.sp.14
    F
    [Page] button
    (Down) (Up)
    (EMP-X5/S5 only)
    When showing a slide show in PowerPoint, 
    you can use the projectors remote control to 
    move to the next slide/previous slide if it is 
    connected to a computer by a USB cable.
    * 
    sp.63
    G
    [E-Zoom] button 
    (+) (-)
    (+) Enlarges the image without changing the 
    projection size.
    (-) Reduces parts of the image that have been 
    enlarged using the [+] button.sp.17
    H
    [A/V Mute] button
    Turns the video and audio on or off. sp.15
    I
    [Freeze] button
    Images are paused or unpaused.sp.16
    J
    [Aspect] button
    The aspect ratio
    g changes each time the 
    button is pressed.sp.16
    K
    Numeric buttons
    Use these buttons when entering a password. 
    sp.19
    * Limited to computers with the following operating systems installed.
    Windows 98/98SE/2000/Me/XP Home Edition/XP Professional
    Macintosh: OS 8.6 to 9.2/10.1 to 10.3
    Name
    Function 
    						
    All Epson manuals Comments (0)

    Related Manuals for Epson Projector Emp S5 User Manual