Epson Projector Emp S3 User Manual

60
MaintenanceE
Install the new lamp.
Insert the new lamp so that the lamp fits in place correctly and 
once it is fully inserted, tighten the two screws.
F
Install the lamp cover.
Slide the lamp cover and tighten the cover fixing screws.
 Install the lamp securely. If the lamp cover is removed, 
the lamp turns off automatically as a safety precaution. 
Moreover, the lamp will not turn on if the lamp or the 
lamp cover is not installed correctly.
 The lamp contains mercury. Dispose of used lamps...

61
Maintenance
The projector has a built-in counter which keeps track of the lamp 
operating time. When the cumulative operating time reaches a certain 
point, it causes the replacement warning message to be displayed. 
Therefore, the counter needs to be reset after the lamp has been replaced 
with a new one. You can do this using the configuration menu.
PROCEDUREA
Connect the power cable and turn on the projector.
B
Select Reset from the configuration menu, and then 
select Lamp-Hours reset. 
For...

62
Maintenance
If the air filters are broken or if the warning message reappears after they 
have been cleaned, they should be replaced.
The air filter can be replaced even if the projector is installed on a ceiling.
PROCEDUREA
After you turn off the projector’s power, and the 
confirmation buzzer beeps twice, disconnect the 
power cable.
B
Remove the air filter.
Put your finger into the recess of the air filter and slide it 
forward to remove it.
C
Install the new air filter.
Slide the air filter covers...

63
Saving a Users LogoYou can record the image that is currently being projected as a users logo.
PROCEDUREA
Project the image you would like to use as the user’s 
logo, and then display the configuration menu.
B
Select Extended from the configuration menu, and 
then select User’s Logo. 
For details on this operation, refer to 
Using the Configuration 
Menu
. sp.32
Check which buttons on the remote control or the control panel 
you can use, and the operations they perform, in the guide at the 
bottom of...

64
Saving a Users LogoC
When Choose this image as the Users Logo? 
appears, select Yes.
D
The image to be recorded and a selection marquee 
box will be displayed. Move the marquee box to select 
the part of the image to use.
E
When Select this image? appears, select Yes.
F
Select the zoom rate from the Zoom rate setting 
screen.
G
When Save this image? is displayed, select Yes.
The image will then be saved. Once the image has been saved, 
the message Completed. will be displayed.
When you press the...

65
Checking Projected Images on an External Monitor (Monitor Output)While performing presentations and so on, you can check analogue RGB 
images and RGB video images from a computer being input to the Computer/
Component Video terminal by connecting an external monitor to this 
projector.
 Component video, S-Video, and component video 
images cannot be output to an external monitor.
 The setting gauge for keystone correction and the 
configuration menus and help menus are not output to 
the external...

66
Optional Accessories and ConsumablesThe following optional accessories are available for purchase if required. This list of optional accessories is current as of April, 2005. Details of accessories are 
subject to change without notice. Varies depending on country of purchase.
* A special method of installation is required in order to suspend the 
projector from a ceiling. Please contact your dealer if you would like to 
use this installation method.
Optional Accessories Soft carrying case ELPKS16
Use...

67
GlossaryThe following is an explanation of some of the terms used in this guide which may be unfamiliar or which are not explained in the text of this guide itself. Further 
information can be obtained by referring to other commercially-available publications.
Aspect ratio
The ratio between an images length and its height. HDTV images have an aspect ratio of 16:9 and appear elongated. The 
aspect ratio for standard images is 4:3.
Color Temp.
The temperature of an object that is emitting light. If the...

68
Glossary
Squeeze mode
In this mode, wide-screen images in 16:9 mode are compressed in the horizontal direction so that they are stored on the 
recording medium as 4:3 images.
When these images are played back by the projector in squeeze mode, they are restored to their original 16:9 format.
sRGB
An international standard for colour intervals that was formulated so that colours which are reproduced by video equipment 
can be handled easily by computer operating systems (OS) and the Internet. If the...

69
List of ESC/VP21 CommandsCommand List
When a power on command is sent to the projector, the power will turn on 
and the projector will change to warm-up mode. When the power has 
turned on, a colon : (3Ah) will be returned.
When the projector executes a command, it returns a : and waits for the 
next command to be sent.
If command processing terminates with an error, the projector outputs an 
error message and then returns the : code.
* When issuing any of the above commands, tack a Carriage Return...