Epson Projector Emp S3 User Manual
Here you can view all the pages of manual Epson Projector Emp S3 User Manual. The Epson manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 11
![Page 11
10
Part Names and FunctionsRemote Control
If you position the over the button icon or button name, a description of that button will appear.
•[Video] button sp.18•[S-Video] button sp.18
•Numeric buttons sp.26•Remote control light-emitting area
sSetup Guide
•[A/V Mute] button sp.20•[E-Zoom] button ( ) ( ) sp.22•[Enter] button sp.24 , p.32•[Esc] button sp.24 , p.32•[Auto] button sp.12
•[Menu] button sp.32•[Power] button sSetup Guide•[Color Mode] button sp.14•[ ] buttons sp.24 , p.32•[Freeze]...](http://img.usermanuals.tech/thumb/23/90106/w300_epson-emp-s3-manual_d-10.png "Page 11
10
Part Names and FunctionsRemote Control
If you position the over the button icon or button name, a description of that button will appear.
•[Video] button sp.18•[S-Video] button sp.18
•Numeric buttons sp.26•Remote control light-emitting area
sSetup Guide
•[A/V Mute] button sp.20•[E-Zoom] button ( ) ( ) sp.22•[Enter] button sp.24 , p.32•[Esc] button sp.24 , p.32•[Auto] button sp.12
•[Menu] button sp.32•[Power] button sSetup Guide•[Color Mode] button sp.14•[ ] buttons sp.24 , p.32•[Freeze]...")
10 Part Names and FunctionsRemote Control If you position the over the button icon or button name, a description of that button will appear. •[Video] button sp.18•[S-Video] button sp.18 •Numeric buttons sp.26•Remote control light-emitting area sSetup Guide •[A/V Mute] button sp.20•[E-Zoom] button ( ) ( ) sp.22•[Enter] button sp.24 , p.32•[Esc] button sp.24 , p.32•[Auto] button sp.12 •[Menu] button sp.32•[Power] button sSetup Guide•[Color Mode] button sp.14•[ ] buttons sp.24 , p.32•[Freeze]...
Page 12
Adjusting and changing the imageThis chapter explains how to adjust the quality of the image, the volume, the colour mode selection and so on, and also how to change the image.Adjusting the Image Quality .............................. 12 • Adjusting Computer Images and RGB Video Images .....12 Automatic Setup ........................................................................ 12 Adjusting the Tracking .............................................................. 12 Adjusting the...
Page 13
![Page 13
12
Adjusting the Image QualityAdjusting Computer Images and RGB Video Images
Automatic setup detects analogue RGB signals coming from a connected
computer, and automatically adjusts these signals so that the optimum
images can be obtained.
Automatic setup involves adjustment of the following three items:
Tracking
g, Position and Sync (synchronisation)
g.
If Auto Setup in the Signal menu is set to OFF, automatic setup is
not carried out. In this case, press the [Auto] button on the remote control
or...](http://img.usermanuals.tech/thumb/23/90106/w300_epson-emp-s3-manual_d-12.png "Page 13
12
Adjusting the Image QualityAdjusting Computer Images and RGB Video Images
Automatic setup detects analogue RGB signals coming from a connected
computer, and automatically adjusts these signals so that the optimum
images can be obtained.
Automatic setup involves adjustment of the following three items:
Tracking
g, Position and Sync (synchronisation)
g.
If Auto Setup in the Signal menu is set to OFF, automatic setup is
not carried out. In this case, press the [Auto] button on the remote control
or...")
12 Adjusting the Image QualityAdjusting Computer Images and RGB Video Images Automatic setup detects analogue RGB signals coming from a connected computer, and automatically adjusts these signals so that the optimum images can be obtained. Automatic setup involves adjustment of the following three items: Tracking g, Position and Sync (synchronisation) g. If Auto Setup in the Signal menu is set to OFF, automatic setup is not carried out. In this case, press the [Auto] button on the remote control or...
Page 14
![Page 14
13
Adjusting the Image QualityB
Adjust the tracking until the vertical stripes disappear
from the image.
The tracking value increases or decreases each time a button is
pressed.
C
Press the [Menu] button to exit the configuration
menu.
If flickering, fuzziness or interference appear in
computer or RGB video images, and this cannot
be fixed using automatic setup, you will need to
adjust the Sync (synchronisation)
g manually
using the following procedure.
PROCEDUREA
Select Signal from the...](http://img.usermanuals.tech/thumb/23/90106/w300_epson-emp-s3-manual_d-13.png "Page 14
13
Adjusting the Image QualityB
Adjust the tracking until the vertical stripes disappear
from the image.
The tracking value increases or decreases each time a button is
pressed.
C
Press the [Menu] button to exit the configuration
menu.
If flickering, fuzziness or interference appear in
computer or RGB video images, and this cannot
be fixed using automatic setup, you will need to
adjust the Sync (synchronisation)
g manually
using the following procedure.
PROCEDUREA
Select Signal from the...")
13 Adjusting the Image QualityB Adjust the tracking until the vertical stripes disappear from the image. The tracking value increases or decreases each time a button is pressed. C Press the [Menu] button to exit the configuration menu. If flickering, fuzziness or interference appear in computer or RGB video images, and this cannot be fixed using automatic setup, you will need to adjust the Sync (synchronisation) g manually using the following procedure. PROCEDUREA Select Signal from the...
Page 15
![Page 15
14
Adjusting the Image QualityB
Adjust the synchronization until the horizontal noise
disappears from the image.
The sync value increases or decreases each time a button is
pressed.
C
Press the [Menu] button to exit the configuration
menu.
Selecting the Projection Quality (Color Mode)
The following seven preset colour modes are available for use depending
on the characteristics of the images that are being projected. You can easily
obtain the optimum image quality simply by selecting the colour mode...](http://img.usermanuals.tech/thumb/23/90106/w300_epson-emp-s3-manual_d-14.png "Page 15
14
Adjusting the Image QualityB
Adjust the synchronization until the horizontal noise
disappears from the image.
The sync value increases or decreases each time a button is
pressed.
C
Press the [Menu] button to exit the configuration
menu.
Selecting the Projection Quality (Color Mode)
The following seven preset colour modes are available for use depending
on the characteristics of the images that are being projected. You can easily
obtain the optimum image quality simply by selecting the colour mode...")
14 Adjusting the Image QualityB Adjust the synchronization until the horizontal noise disappears from the image. The sync value increases or decreases each time a button is pressed. C Press the [Menu] button to exit the configuration menu. Selecting the Projection Quality (Color Mode) The following seven preset colour modes are available for use depending on the characteristics of the images that are being projected. You can easily obtain the optimum image quality simply by selecting the colour mode...
Page 16
15 Adjusting the Image Quality PROCEDUREEach time you press the button, the colour modes change in the following order. The current setting appears in the top-right corner of the screen each time the colour mode is changed. While the colour mode name is displayed on the screen, it does not change to the next colour mode setting unless you press the button. The colour mode can also be set using the Color Mode command in the Image menu. sp.33Remote control
Page 17
![Page 17
16
Adjusting the Projection Position (Image Shift)When you cannot setup this projector directly in front of the screen, the
projection position can be finely tuned without moving this projector.
PROCEDUREA
Using the button on the projector, perform zoom
adjustment or keystone correction.
sSetup Guide
The Image Shift adjustment screen is displayed after you finish
making adjustments.
B
Adjust projection position.
C
Press the [Esc] button to close the adjustment
screen.
The screen closes automatically...](http://img.usermanuals.tech/thumb/23/90106/w300_epson-emp-s3-manual_d-16.png "Page 17
16
Adjusting the Projection Position (Image Shift)When you cannot setup this projector directly in front of the screen, the
projection position can be finely tuned without moving this projector.
PROCEDUREA
Using the button on the projector, perform zoom
adjustment or keystone correction.
sSetup Guide
The Image Shift adjustment screen is displayed after you finish
making adjustments.
B
Adjust projection position.
C
Press the [Esc] button to close the adjustment
screen.
The screen closes automatically...")
16 Adjusting the Projection Position (Image Shift)When you cannot setup this projector directly in front of the screen, the projection position can be finely tuned without moving this projector. PROCEDUREA Using the button on the projector, perform zoom adjustment or keystone correction. sSetup Guide The Image Shift adjustment screen is displayed after you finish making adjustments. B Adjust projection position. C Press the [Esc] button to close the adjustment screen. The screen closes automatically...
Page 18
![Page 18
17
Adjusting the VolumeThe volume of the projectors built-in speaker can be adjusted as follows.
PROCEDUREWhen the button is pressed to the [ ] side, the volume increases,
and when it is pressed to the [ ] side, the volume decreases.
The volume gauge appears on the screen when the volume is being
adjusted.
If the value displayed in the gauge on the screen stops
changing when the volume is being adjusted, it
indicates that the limit for volume adjustment has been
reached.
The volume can also be...](http://img.usermanuals.tech/thumb/23/90106/w300_epson-emp-s3-manual_d-17.png "Page 18
17
Adjusting the VolumeThe volume of the projectors built-in speaker can be adjusted as follows.
PROCEDUREWhen the button is pressed to the [ ] side, the volume increases,
and when it is pressed to the [ ] side, the volume decreases.
The volume gauge appears on the screen when the volume is being
adjusted.
If the value displayed in the gauge on the screen stops
changing when the volume is being adjusted, it
indicates that the limit for volume adjustment has been
reached.
The volume can also be...")
17 Adjusting the VolumeThe volume of the projectors built-in speaker can be adjusted as follows. PROCEDUREWhen the button is pressed to the [ ] side, the volume increases, and when it is pressed to the [ ] side, the volume decreases. The volume gauge appears on the screen when the volume is being adjusted. If the value displayed in the gauge on the screen stops changing when the volume is being adjusted, it indicates that the limit for volume adjustment has been reached. The volume can also be...
Page 19
![Page 19
18
Changing the Projected Image (Source Search)Automatically Detect Incoming Signals and Change the Projected Image (Source Search)
The picture signal input from the connected equipment is automatically
detected and projected.PROCEDUREA
Perform the Source Search.
B
The screen being searched for is displayed, and then
the image is projected.
When two or more pieces of equipment are connected, press the
[Source Search] button until the target image is projected.
Changing Directly from the Remote...](http://img.usermanuals.tech/thumb/23/90106/w300_epson-emp-s3-manual_d-18.png "Page 19
18
Changing the Projected Image (Source Search)Automatically Detect Incoming Signals and Change the Projected Image (Source Search)
The picture signal input from the connected equipment is automatically
detected and projected.PROCEDUREA
Perform the Source Search.
B
The screen being searched for is displayed, and then
the image is projected.
When two or more pieces of equipment are connected, press the
[Source Search] button until the target image is projected.
Changing Directly from the Remote...")
18 Changing the Projected Image (Source Search)Automatically Detect Incoming Signals and Change the Projected Image (Source Search) The picture signal input from the connected equipment is automatically detected and projected.PROCEDUREA Perform the Source Search. B The screen being searched for is displayed, and then the image is projected. When two or more pieces of equipment are connected, press the [Source Search] button until the target image is projected. Changing Directly from the Remote...
Page 20
Useful FunctionsThis chapter explains useful functions for giving presentations and so on, and the security functions.Functions for Enhancing Projection ................. 20 Pausing the Image and Sound (A/V Mute) .......................20 Freezing the Image (Freeze) ...............................................20 Changing the Aspect Ratio (Resizing) ...............................21 Displaying the Pointer (Pointer) ........................................21 Enlarging Part of the Image...