Epson Projector Emp S3 User Manual

30
Security functionsC
When the confirmation message is displayed, select 
Yes.
The control panel buttons will be locked in accordance with the 
selected setting.
There are two methods to cancel the projectors control 
panel lock.
 Using remote control, change the Settings - 
Operation Lock in the configuration menu to 
OFF .
 Hold down the projectors [Enter] button continuously 
for about 7 seconds, a message will be displayed and the 
lock will be cancelled. 

Configuration MenuThis chapter explains how to use the configuration menu and its functions.Using the Configuration Menu........................... 32
List of Functions ................................................. 33
 Image Menu.....................................................................33
 Signal Menu.....................................................................34
 Settings Menu ..................................................................35
 Extended Menu...

32
Using the Configuration MenuA
Selecting from 
the top menu
C
Changing the 
selected item
B
Selecting from 
the sub menu
Top menu
Sub menu (Settings) guide
Using the remote controlUsing the control panel
Select the setting to change.
Buttons used 

33
List of FunctionsImage Menu
The items that can be set will vary depending on the input source that is currently being projected. Setting details are saved separately for each source.Sub-menu
Function
Color Mode
Select the quality of the image to suit your surroundings. sp.14
Brightness
Adjusts the image brightness.
Contrast
g
Adjusts the difference between light and shade in the images.
Color Intensity
Adjusts the colour intensity for the images.
Tint
(Adjustment is only possible when component video...

34
List of FunctionsSignal Menu
The items that can be set will vary depending on the input source that is currently being projected. Setting details are saved separately for each source.
Sub-menu
Function
Auto Setup
Selects whether the automatic adjustment function for automatically optimising images when the input source is changed is turned ON or 
OFF. sp.12
Tracking
g
Adjusts computer images when vertical stripes appear in the images. sp.12
Sync.
g
Adjusts computer images when flickering, fuzziness or...

35
List of FunctionsSettings Menu
Sub-menu
Function
Keystone
Corrects vertical keystone distortion in images. sSetup Guide
Zoom
Adjusts the size of the projected image. sSetup Guide
Wide: Larger Tele: Smaller 
Image Shift
Adjusts the projection position. sp.16
Operation 
Lock
When set to ON, the operation of all buttons on the projectors control panel except for the [Power] button will be disabled. sp.29
Pointer 
Shape
The shape of the pointer can be selected. sp.21
Pointer 1:           Pointer 2:...

36
List of FunctionsExtended Menu
Sub-menu
Function
Display
This lets you make settings related to the projectors display.
Message:
Sets whether the input source name or colour mode name or a message is displayed on the screen (ON) or not displayed (OFF) at times 
such as when the input source or colour mode is changed or when no image signals are being input.
Background Color:
Sets the screen status when the [A/V Mute] button on the remote control is being pressed or when no image signals are being...

37
List of FunctionsOperation
Direct Power ON:
Sets whether direct power on is enabled (ON) or disabled (OFF).
When you set to ON and leave the power cable connected to a wall socket, be aware of that sudden surges of electricity that may occur when 
power comes back on after a power outage may cause the projector to turn on automatically.
Sleep Mode:
Sets whether projection stops automatically (ON) or not (OFF) when no operations are carried out for approximately 30 minutes while no 
image signals are...

38
List of FunctionsInfo Menu
Lets you check the status of the image signals being projected and the status of the projector. (Display only)Sub-menu
Function
Lamp Hours
Shows the cumulative lamp operating time.
If it reaches the lamp warning time, the characters are displayed in yellow. The cumulative operating time from 0 to 10 hours will be displayed as 
0H. From 10H onwards, the display will be in units of 1 hour.
Source
Displays the input source which is currently being projected.
Input Signal...

39
List of FunctionsReset Menu
Sub-menu
Function
Reset All
Resets all items in all menus to their default settings.
 The Computer Input, Zoom, Image Shift, User’s Logo, Lamp Hours and Language settings will not be reset to their defaults.
Lamp-Hours 
Reset
Clear the cumulative lamp operating time and reset to 0H. Perform this procedure when you replace the lamp.