Epson Projector Emp 7800 User Manual

80
Using the Configuration Menu Functions Using the Configuration Menu Functions
Audio Menu
Advanced2
+
-
Volume
Volume
  15 Video
Audio
Setting
Users Logo
Advanced1
About
Reset All
:
[Menu]: Exit
[    ]: Enter [    ]: Select
Reset
Execute
+
-
Treble
   0 :
+
-
Bass
Bass
   0 :
Effect
Computer/DVI Audio Input :
Computer/DVIComputer
DVI
Sub-menu
Function
Default
Computer/
DVI Audio 
InputUse this command to specify the [Computer] port or [DVI] 
port as the video port being used so that sound is input to...

81
Using the Configuration Menu Functions Using the Configuration Menu Functions
Effect Menu
Set
Video
Audio
Setting
Users Logo
Advanced1
Color Mode Pointer/Line1
Color:
:[Menu]: Exit
Pointer Speed 
:
[    ]: Enter [    ]: Select
About
Reset AllAdvanced2Effect
Zoom Rate
:100%Color
WidthSet
Pointer/Line2
Set
Pointer/Line3Zoom Rate
:100%
Zoom Rate:100%LMExecute
: : Color
Width
: : Color
Width
H
Reset
Sub-menu
Function
Default
Pointer/
Line1Sets the pointer or line that is displayed when the [Effect]...

82
Using the Configuration Menu Functions Using the Configuration Menu Functions
Setting Menu
P in P Keystone
No-Signal Msg.OFFS-Video
MessageONOFFBlackBlue
A/V MuteLogo BlackBlue
Video
Audio
Setting
Users Logo
Advanced1:
:
:
:
:
[Menu]: Exit
[    ]: Enter [    ]: Select
Reset All About Advanced2 Effect
H/V-Keystone
Quick Corner
Adjust
Reset
Execute Sleep ModeONOFF
:
Computer Input
BNC Input
Composite
Logo
Select [                     ]
Analog-RGB
[Analog-RGB  ]Select 
Sub-menu
Function
Default
Keystone...

83
Using the Configuration Menu Functions Using the Configuration Menu Functions
No-Signal 
Msg.Sets the message status and background colour at times 
such as when no video signal is being input.
When set to OFF, the background colour becomes black 
and no message is displayed.
 To change the users logo, you need to record your own 
logo.  p.132Blue
Message Selects whether the image signal name or colour mode 
name is displayed on the screen (ON) or not displayed 
(OFF) when switching the video signal...

84
Using the Configuration Menu Functions Using the Configuration Menu Functions
Users Logo Menu
Execute
Video
Audio
Effect
Users Logo
Advanced1
About
Reset All
[    ]: Execute[Menu]: Exit
[    ]: Select
SettingAdvanced2
Sub-menu
Function
Default
Execute Records a users logo.   p.132
 Press the [Enter] button on the remote control or the 
[Auto/Enter] button on the projectors control panel, and 
then follow the instructions that appear on the screen.EPSON logo 

85
Using the Configuration Menu Functions Using the Configuration Menu Functions
Advanced1 Menu
Standby Mode
:
Startup ScreenONOFF
:
Video
Audio
Setting
Users Logo
Advanced1
About
Reset All
Progressive
Color Adjustment
Color Temp.RGB
Rear Proj.LanguageSelect[English]ResetExecute
Adjust
ONOFF:
:
CeilingONOFF
:
[Menu]: Exit
[    ]: Enter [    ]: Select
EffectAdvanced2
Network ONNetwork OFF:OFFVideo
Film/Auto
Sub-menu
Function
Default
Startup 
ScreenSets whether the startup screen is displayed or not.
To...

86
Using the Configuration Menu Functions Using the Configuration Menu Functions
Color 
Adjustment
Adjusts the colour temperature
 and intensity of each RGB 
(red, green, blue) colour for each input source.
Color Temp.: Lets you adjust bright colours within a range 
from reddish tinges to bluish tinges.
If the colour temperature is lower, colours 
appear reddish and colour tones appear 
softer.
If the colour temperature is higher, colours 
appear bluish and colour tones appear 
sharper.
Press the...

87
Using the Configuration Menu Functions Using the Configuration Menu Functions
Standby 
ModeSet to Network ON to use network monitoring and 
control functions and the standby monitor out function 
while the projector is in standby mode.
When this setting is changed, turn the power off, and when 
the cool-down
 period has finished, turn the power back on 
again. The new setting will be applied after the power is 
turned back on.Network OFF
Language Sets the language for message displays.
 Press the...

88
Using the Configuration Menu Functions Using the Configuration Menu Functions
Advanced2 Menu
Brightness ControlHighLow
:
Video
Audio
Setting
Users Logo
Advanced1
About
Reset All
Projector ID
NetworkReset
Execute
: 1
[Menu]: Exit
[    ]: Enter [    ]: Select
EffectAdvanced2
COM Port
BNC Sync Termination
:
ONOFF:
Set
Set
RS-232CUSB
Auto Setup
ONOFF
:
Sub-menu
Function
Default
Brightness 
ControlThis lets you set the lamp brightness to one of two settings.
Select Low if the images being projected are too...

89
Using the Configuration Menu Functions Using the Configuration Menu Functions
Reset Resets all adjustments values for the Advanced2 menu 
functions except for the Projector ID and Network 
settings to their default settings.
 Press the [Enter] button on the remote control or the 
[Auto/Enter] button on the projectors control panel to 
reset.
 Select Reset All to reset all menu settings – including 
settings for the Video and Audio menus – to their 
default settings.   p.91-
Sub-menu
Function
Default