Epson Projector Emp 7800 User Manual
Here you can view all the pages of manual Epson Projector Emp 7800 User Manual. The Epson manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 101
![Page 101
100
Projector Monitoring and Control using a Network Projector Monitoring and Control using a Network
The following Setup of mailing functions window will
be displayed.
The following table shows the setting details for each item.
Once the mail notification settings have been
completed, click [OK].The display will return to the Setup for Network
Projector window, so click [Set].When the setting finished window appears, click
[OK].The test message transmission checking window will
be displayed.
You...](http://img.usermanuals.tech/thumb/23/89683/w300_epson-emp-7800-manual_d-100.png "Page 101
100
Projector Monitoring and Control using a Network Projector Monitoring and Control using a Network
The following Setup of mailing functions window will
be displayed.
The following table shows the setting details for each item.
Once the mail notification settings have been
completed, click [OK].The display will return to the Setup for Network
Projector window, so click [Set].When the setting finished window appears, click
[OK].The test message transmission checking window will
be displayed.
You...")
100 Projector Monitoring and Control using a Network Projector Monitoring and Control using a Network The following Setup of mailing functions window will be displayed. The following table shows the setting details for each item. Once the mail notification settings have been completed, click [OK].The display will return to the Setup for Network Projector window, so click [Set].When the setting finished window appears, click [OK].The test message transmission checking window will be displayed. You...
Page 102
![Page 102
101
Projector Monitoring and Control using a Network Projector Monitoring and Control using a Network
The settings will then be applied, and the display will
return to the window that appeared in step 2. Click
[ ] to close EMP NetworkManager.
If an e-mail message with EPSON Projector in the subject line is sent to
the IP addresses
that have been set as mail notification destinations, the
message is a notification message saying that there is a problem with the
projector.
The following information...](http://img.usermanuals.tech/thumb/23/89683/w300_epson-emp-7800-manual_d-101.png "Page 102
101
Projector Monitoring and Control using a Network Projector Monitoring and Control using a Network
The settings will then be applied, and the display will
return to the window that appeared in step 2. Click
[ ] to close EMP NetworkManager.
If an e-mail message with EPSON Projector in the subject line is sent to
the IP addresses
that have been set as mail notification destinations, the
message is a notification message saying that there is a problem with the
projector.
The following information...")
101 Projector Monitoring and Control using a Network Projector Monitoring and Control using a Network The settings will then be applied, and the display will return to the window that appeared in step 2. Click [ ] to close EMP NetworkManager. If an e-mail message with EPSON Projector in the subject line is sent to the IP addresses that have been set as mail notification destinations, the message is a notification message saying that there is a problem with the projector. The following information...
Page 103
![Page 103
102
Projector Monitoring and Control using a Network Projector Monitoring and Control using a Network
If the name of the projector that you would like to set up mail notification
for does not appear in the window, use the following procedure to
manually connect the projector.
PROCEDURE
Start EMP NetworkManager.Double-click [Projector address selection] in the
projector list display area.
The following IP Address Setup window will be
displayed.
You should make the following settings when manually...](http://img.usermanuals.tech/thumb/23/89683/w300_epson-emp-7800-manual_d-102.png "Page 103
102
Projector Monitoring and Control using a Network Projector Monitoring and Control using a Network
If the name of the projector that you would like to set up mail notification
for does not appear in the window, use the following procedure to
manually connect the projector.
PROCEDURE
Start EMP NetworkManager.Double-click [Projector address selection] in the
projector list display area.
The following IP Address Setup window will be
displayed.
You should make the following settings when manually...")
102 Projector Monitoring and Control using a Network Projector Monitoring and Control using a Network If the name of the projector that you would like to set up mail notification for does not appear in the window, use the following procedure to manually connect the projector. PROCEDURE Start EMP NetworkManager.Double-click [Projector address selection] in the projector list display area. The following IP Address Setup window will be displayed. You should make the following settings when manually...
Page 104
![Page 104
103
Projector Monitoring and Control using a Network Projector Monitoring and Control using a Network
A projector list that has already been recorded by EMP Monitor can also
be shared by EMP NetworkManager.
PROCEDURE
Start EMP NetworkManager.The projectors that have been recorded will be
displayed in the projector list display area.Click [Import].
The file selection window will be displayed.
Select the registration file for EMP Monitor and then click
[Open]. A list of the projectors that have been...](http://img.usermanuals.tech/thumb/23/89683/w300_epson-emp-7800-manual_d-103.png "Page 104
103
Projector Monitoring and Control using a Network Projector Monitoring and Control using a Network
A projector list that has already been recorded by EMP Monitor can also
be shared by EMP NetworkManager.
PROCEDURE
Start EMP NetworkManager.The projectors that have been recorded will be
displayed in the projector list display area.Click [Import].
The file selection window will be displayed.
Select the registration file for EMP Monitor and then click
[Open]. A list of the projectors that have been...")
103 Projector Monitoring and Control using a Network Projector Monitoring and Control using a Network A projector list that has already been recorded by EMP Monitor can also be shared by EMP NetworkManager. PROCEDURE Start EMP NetworkManager.The projectors that have been recorded will be displayed in the projector list display area.Click [Import]. The file selection window will be displayed. Select the registration file for EMP Monitor and then click [Open]. A list of the projectors that have been...
Page 105
![Page 105
104
Projector Monitoring and Control using a Network Projector Monitoring and Control using a Network
PROCEDURE
With Windows running, click [Start], point to
[Programs] (or [All Programs]), point to [EPSON
Projector] and then click [EMP Monitor].
EMP Monitor will start up.If EMP Monitor is being started up for the first time
after it was installed, or if you would like to register
additional projectors, click the [Register projector]
icon. If all projectors are already registered and you
do not...](http://img.usermanuals.tech/thumb/23/89683/w300_epson-emp-7800-manual_d-104.png "Page 105
104
Projector Monitoring and Control using a Network Projector Monitoring and Control using a Network
PROCEDURE
With Windows running, click [Start], point to
[Programs] (or [All Programs]), point to [EPSON
Projector] and then click [EMP Monitor].
EMP Monitor will start up.If EMP Monitor is being started up for the first time
after it was installed, or if you would like to register
additional projectors, click the [Register projector]
icon. If all projectors are already registered and you
do not...")
104 Projector Monitoring and Control using a Network Projector Monitoring and Control using a Network PROCEDURE With Windows running, click [Start], point to [Programs] (or [All Programs]), point to [EPSON Projector] and then click [EMP Monitor]. EMP Monitor will start up.If EMP Monitor is being started up for the first time after it was installed, or if you would like to register additional projectors, click the [Register projector] icon. If all projectors are already registered and you do not...
Page 106
![Page 106
105
Projector Monitoring and Control using a Network Projector Monitoring and Control using a Network
Select the projector to be monitored or controlled and
then click [Add].If there are other projectors that you would like to
monitor that need to be added, repeat step 4.
Once all new projectors to be monitored have been
added, click [Close].
The display will return to the Register projector window, and
the names of the added projectors will appear in the projector
list.Once all target projectors...](http://img.usermanuals.tech/thumb/23/89683/w300_epson-emp-7800-manual_d-105.png "Page 106
105
Projector Monitoring and Control using a Network Projector Monitoring and Control using a Network
Select the projector to be monitored or controlled and
then click [Add].If there are other projectors that you would like to
monitor that need to be added, repeat step 4.
Once all new projectors to be monitored have been
added, click [Close].
The display will return to the Register projector window, and
the names of the added projectors will appear in the projector
list.Once all target projectors...")
105 Projector Monitoring and Control using a Network Projector Monitoring and Control using a Network Select the projector to be monitored or controlled and then click [Add].If there are other projectors that you would like to monitor that need to be added, repeat step 4. Once all new projectors to be monitored have been added, click [Close]. The display will return to the Register projector window, and the names of the added projectors will appear in the projector list.Once all target projectors...
Page 107
106 Projector Monitoring and Control using a Network Projector Monitoring and Control using a Network The statuses of the registered projectors will each be displayed. Once a projector has been registered, the status of the projector will be displayed automatically each time EMP Monitor is started from then on. The following table shows the display details. Status : The projector statuses are indicated by means of the following icons. Power ON with no problems Power OFF with no problems Power ON...
Page 108
![Page 108
107
Projector Monitoring and Control using a Network Projector Monitoring and Control using a Network
The power for all registered projectors can be turned
on and off at the same time, and the input signal for
all projectors can also be selected at the same time.
Select the projectors for which the operation is to be
carried out and then click the desired operation
button.
If you would like to select all projectors, click [Select All].
Furthermore, you can also use the same operations as selecting...](http://img.usermanuals.tech/thumb/23/89683/w300_epson-emp-7800-manual_d-107.png "Page 108
107
Projector Monitoring and Control using a Network Projector Monitoring and Control using a Network
The power for all registered projectors can be turned
on and off at the same time, and the input signal for
all projectors can also be selected at the same time.
Select the projectors for which the operation is to be
carried out and then click the desired operation
button.
If you would like to select all projectors, click [Select All].
Furthermore, you can also use the same operations as selecting...")
107 Projector Monitoring and Control using a Network Projector Monitoring and Control using a Network The power for all registered projectors can be turned on and off at the same time, and the input signal for all projectors can also be selected at the same time. Select the projectors for which the operation is to be carried out and then click the desired operation button. If you would like to select all projectors, click [Select All]. Furthermore, you can also use the same operations as selecting...
Page 109
TroubleshootingThis chapter describes how to identify problems and what to do if a problem is found.Using the Help ................................................... 109 Problem Solving................................................ 111 Reading the Indicators...................................................... 111 When the Indicators Provide No Help ............................ 114 Problems relating to images .................................................... 115 Problems relating to...
Page 110
![Page 110
109
Using the HelpIf a problem occurs with the projector, the Help function uses on-screen
displays to assist you in solving the problem. It uses a series of menus in a
question and answer format.
PROCEDURE
Press the [Help] button on either the remote control
or the projectors control panel.
The help menu will be displayed.Select a menu item.
If using the remote control, tilt the [ ] button up or down to
select a menu item.
If using the projectors control panel, press the [ ] or [ ]
button to select...](http://img.usermanuals.tech/thumb/23/89683/w300_epson-emp-7800-manual_d-109.png "Page 110
109
Using the HelpIf a problem occurs with the projector, the Help function uses on-screen
displays to assist you in solving the problem. It uses a series of menus in a
question and answer format.
PROCEDURE
Press the [Help] button on either the remote control
or the projectors control panel.
The help menu will be displayed.Select a menu item.
If using the remote control, tilt the [ ] button up or down to
select a menu item.
If using the projectors control panel, press the [ ] or [ ]
button to select...")
109 Using the HelpIf a problem occurs with the projector, the Help function uses on-screen displays to assist you in solving the problem. It uses a series of menus in a question and answer format. PROCEDURE Press the [Help] button on either the remote control or the projectors control panel. The help menu will be displayed.Select a menu item. If using the remote control, tilt the [ ] button up or down to select a menu item. If using the projectors control panel, press the [ ] or [ ] button to select...