Epson Projector Emp 735 User Manual

40
Setting, Monitoring and Controlling from a Computer
EasyMP Operation Guide
Projector control uses EasyRemote at the bottom of the setup and control browser 
page. 
The functions of each of the icons are explained below. 
Projector Control
Comp/
EasyMPThis switches between images from the Computer/Component Video 
port and the EasyMP screen.
S-Video/
VideoThis switches the signal source being input from the S-Video port 
and the Video port.
FreezeThis pauses the image. However, audio does not stop....

41
Setting, Monitoring and Controlling from a Computer
EasyMP Operation Guide
Monitoring and Control Using EMP Monitor
When the projector and a computer are connected with the wireless LAN access 
point mode, it is possible to simultaneously monitor and control multiple projectors 
using the EMP Monitor. It is possible for a single operator to simultaneously control 
the starting and monitoring of projectors arranged in separate classrooms and 
meeting rooms by using the EMP Monitor. 
Use the EMP Monitor...

42
Setting, Monitoring and Controlling from a Computer
EasyMP Operation Guide
3Click the Auto detect button. 
The names of the projectors currently connected to a wireless LAN are 
displayed. 
Tip :
The manual registration function is expedient if the IP address of the projector is known. 
Pressing the Manual registration button displays the following Manually register 
projector screen. Input the IP address and click the Confirm button. Click the Add 
button after the projector name is displayed. This...

43
Setting, Monitoring and Controlling from a Computer
EasyMP Operation Guide
4On the Projector Auto detect screen, select the name of the projector to 
monitor, then click the Add projector button. 
5Proceed with Step 4 if there are other projectors to monitor. 
6Add all the projectors to be monitored, and then click the Close button. 
The display returns to the Register projector screen, and the added projector 
names are displayed. 
Selected Projector Name 

44
Setting, Monitoring and Controlling from a Computer
EasyMP Operation Guide
7Register all the selected projectors, and then click the Close button. 
To deselect a projector registered for monitoring, select that projector, and 
delete it by clicking the Delete button. 
Tip :
You can display the projector editing screen and change the IP address by selecting a 
projector name registered in the manual registration function, then clicking the Edit 
button. The Edit button cannot be used for projectors...

45
Setting, Monitoring and Controlling from a Computer
EasyMP Operation Guide
8The status of each of the respective registered projectors is displayed. 
Once registered, the status of a registered projector will be displayed 
automatically at subsequent startups of the EMP Monitor. 
The display content is as shown in the following table. 
StatusThe projector status is displayed as the following icons: 
Power on, no error
Power on, error
Power off, no error
Power off, error
Network Error (The projector is...

46
Setting, Monitoring and Controlling from a Computer
EasyMP Operation Guide
9It is possible to turn power ON/OFF and switch input sources for 
registered projectors simultaneously. Select the projectors to be 
controlled, and click the desired operation button. 
To select all the registered projectors, click the Select All button. 
Furthermore, just as in Windows file selection, it is possible to click the top of a 
range, then click the bottom whilst pressing the [Shift] key on the keyboard to 
select...

47
Setting, Monitoring and Controlling from a Computer
EasyMP Operation Guide
The buttons and their operation are shown below. 
10To end, select File - Close or click the   button. View details  
buttonThis displays detailed information for the selected 
projector. The content is as follows. 
Basic 
informationProjector name, Lamp, Ceiling, Rear Proj., 
Video Source
Input signal 
informationWhen the input signal is computer or 
component video
Frequency, SYNC Polarity, SYNC Mode, 
Resolution, Refresh...

48
Setting, Monitoring and Controlling from a Computer
EasyMP Operation Guide
Management Using SNMP
When the projector and a computer are connected with the wireless LAN access 
point mode, it is possible to perform projector monitoring, control, and error 
messaging from the computer using SNMP
 and the SNMP manager program.
For details, please contact one of the service offices provided in the catalog.
Tip :
The administrative function using SNMP uses a SNMP management program. For this 
reason, it...

EasyMP Operation Guide
All rights reserved. No part of this publication may be reproduced, stored in a 
retrieval system, or transmitted in any form or by any means, electronic, 
mechanical, photocopying, recording, or otherwise, without the prior written 
permission of SEIKO EPSON CORPORATION. No patent liability is assumed 
with respect to the use of the information contained herein. Neither is any 
liability assumed for damages resulting from the use of the information 
contained herein.
Neither SEIKO...