Epson Projector Emp 735 User Manual

10
Creating and Sending a Scenario
EasyMP Operation Guide
6After the scenario is complete, select File - Save. 
This saves the completed scenario. 
To save under another scenario name, select Save As, and enter the new 
scenario name. 
Tip :
Upon saving, a folder with the same name as the scenario name and the scenario 
name.sit file are created in the scenario folder. Each screen is converted to graphics 
files and saved in the created folder according to the image quality settings.
See Help for the...

11
Creating and Sending a Scenario
EasyMP Operation Guide
2Select Scenario Option, then Send Scenario. 
3A dialogue box for designating the destination drive is displayed. Select 
the drive where the memory card is inserted and click OK. 
4A confirmation message is displayed. Click the OK button. 
5Upon completion of transfer, a message is displayed confirming whether 
autorun setup is to be performed. To set up autorun or continuous play, 
click the OK button and perform the following steps. To set...

12
Creating and Sending a Scenario
EasyMP Operation Guide
6All scenario files within the memory card are displayed in the Scenario 
List on the left. 
In the case of automatic projection at projector power ON, click the desired 
scenario name in the Scenario List, and click the   button. The scenario is 
displayed in the Autorun Scenario List on the right, and is set as an autorun file.
To automatically go back to the beginning once the scenario projection has 
finished, select the desired scenario in...

13
Creating and Sending a Scenario
EasyMP Operation Guide
What Do You Do When ...
To turn a single PowerPoint file into a scenario, simply drag and drop the 
PowerPoint file icon onto the EMP SlideMaker2 program icon on the desktop to 
create a scenario. 
Tip :
The name Scnxxxx (xxxx are numbers) is given to the created scenario. The image 
quality of the scenario is set to Standard. The image quality can be changed in the 
scenario settings dialogue box displayed by selecting File - Properties. For...

14
Creating and Sending a Scenario
EasyMP Operation Guide
It is possible to verify on a computer how a created scenario will project when 
played back on a projector by using the CardPlayer. All the structural elements of 
the scenario such as graphics, animation, background music, etc. will be played. 
1Open the scenario to verify in EMP SlideMaker2. 
2Select Scenario Option - Scenario Preview.
3The Scenario Preview screen is displayed. Operate the scenario 
referring to the following table.
To Verify...

15
Creating and Sending a Scenario
EasyMP Operation Guide
4After verification is complete, click the   button at the top right of the 
screen to close the Scenario Preview screen. 
In EMP SlideMaker2, PowerPoint animation effects and similar effects can be set 
for each cell in the scenario. It is possible to set and project projection times and 
animations for each divided frame for slides with animations set in PowerPoint.
 In this case, right-click the desired animation in the Animation verification...

16
Creating and Sending a Scenario
EasyMP Operation Guide
1Right-click the desired cell or animation, and select Cell Properties. 
To apply the same settings to multiple cells or animations, select multiple cells 
by clicking whilst holding down the [Shift] key or the [Ctrl] key, and then 
right-clicking to select Cell Properties. 
2Displays the Properties screen. Set the items in the following table, then 
click the OK button. 
Cell
Animation 

17
Creating and Sending a Scenario
EasyMP Operation Guide
AdvanceYou can set a transition time between 0 and 1800 seconds 
when Automatically is selected. In manual operation, 
switch by pressing the [Page down] or [Page up] buttons on 
the remote control during projection. 
Animation 
EffectsSelects the effects during screen transition when changing 
screens during projection. 
Selects the direction for the selected animation. 
The following are examples of the effects.
Slide In: Screen transition from...

Showing the 
Presentation (Using 
the CardPlayer)
Here, we will describe how to project a scenario sent to a memory 
card by EMP SlideMaker2, and how to project graphics and 
animation files.
Files that Can be Projected by the CardPlayer ..............  19
Using the CardPlayer .......................................................  20
Starting the CardPlayer...........................................................  20
CardPlayer Basic Operation ......................................................

19
EasyMP Operation Guide
Files that Can be Projected by the CardPlayer
The following files can be projected using CardPlayer. 
Tip :
Projection will not be possible if the file extension is jpeg. 
Regarding projecting JPEG files, the image will not be projected clearly if compression 
is set too high. 
Ty p eFile Type 
(Extension)Notes
Scenario .sit These are scenario files created by 
sending scenarios created in EMP 
SlideMaker2. 
Also plays audio (.wav) files set up as 
background music in EMP...