Epson Projector Emp 71 User Manual
Here you can view all the pages of manual Epson Projector Emp 71 User Manual. The Epson manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 51
49 Advanced Menu Displaying Menus Press the Menu button, use the Enter button to select Advanced from the top menu displayed, and press the Enter button to move to a submenu. Settings MenuContent Language Select the menu language. Select from Japanese, English, German, French, Italian, Spanish, Portuguese, Chinese and Korean. Color Setting Use color temperature or RGB to create settings for the colors displayed on screen. Color Temp: Adjusts the color temperature * of the video. Select Color Temp...
Page 52
50 About Menu Displaying Menus Press the Menu button, use the Enter button to select About from the top menu displayed, and press the Enter button to move to a submenu. Setting and Display Information The settings information displayed in the About menu differs as shown below during video projection from a computer/component versus a video device. D-Sub15: Computer/Component video Video: Video image : Display : No display MenuContentVideo Projection D-Sub15Video Lamp Displays cumulative lamp-on...
Page 53
51 Reset All Menu Displaying Menus Press the Menu button, and use the Enter button to select Reset All from the top-level menu displayed. Settings MenuContent Reset All Returns all menu settings to initial settings. (Lamp and language settings excluded) * Note that rear and invert settings will also be cleared by this operation.
Page 54
52 Initial Settings List Initial settings at product shipment are shown below. Main Menu TitleSubmenu TitleInitial Settings Video (Computer/ Component Video)Position Central value Tracking Dependent on the connected signal Sync. 0 Brightness Central value Contrast Sharpness Gamma Normal Input Signal RGB Auto Setup ON Aspect Ratio 4:3 Video (Video) Position Central value Brightness Contrast Color Tint Sharpness Gamma Normal Mode Auto Aspect Ratio 4:3 Audio Volume Central value Tone Audio Input Auto Effect...
Page 55
53 Troubleshooting Possible Failures ..................................................... 54 When Indicators Do Not Help ................................ 57
Page 56
54 Possible Failures If you think your projector may have failed, first check the indicators on the unit. Your projector includes an operation display indicator and a problem/alarm display indicator which provide information on projector status. Operation Display Indicator Indicator StatusCauseRemedy or StatusSee Page Steady orangeStandby status(Not abnormal) Press the Power button to begin projection.24 Flashing orangeCool-down in progress(Not abnormal) Please wait. Cool-down * time takes about...
Page 57
55 Problem and Alarm Display Indicator Indicator StatusCauseRemedy or StatusSee Page Steady red High internal temperatureThe lamp will turn off automatically and projection will stop. Wait for about 5 minutes without operating the projector. After 5 minutes, disconnect the power plug and connect it again. If the projector overheats, check the following two points. Is the setting-up location well ventilated? Check that the air inlet and air outlet are clear, and that the projector is not...
Page 58
56 Tip: If the indicator is normal but you experience problems with video projection, refer to When Indicators Do Not Help on the following page. If an indicator is showing a status which does not appear in the previous tables, contact your dealer or the nearest address provided at “International Warranty Conditions” in “Safety Instructions/World-Wide Warranty Terms” included in the package. Flashing orangeHigh-speed cooling in progressNot a problem, but projection will be interrupted...
Page 59
57 When Indicators Do Not Help Video is Not Projected [Nothing is Displayed] • Is the lens cover still on? See page 24 Have you turned the power off and then immediately on? See page 31 The Power button cannot be operated immediately after the projection has been switched off. The Power button becomes operable after cool-down * is complete. Is Sleep Mode on? See page 48 If Sleep Mode is set to on and no video signal is input for 30 minutes, the projector lamp shuts off automatically. Is...
Page 60
58 Carefully review sections such as Providing External Output and Providing Output to an Externally Connected Monitor in the instruction manual of the connected computer. Image is Unclear Is the focus adjusted correctly? See page 29 Is the projection distance optimal? See page 16 The recommended projection distance is 39.37inches (1.0m) to 515.75inches (13.1m). Set up the projector in this range. Is the lens dirty? See page 64 Is the projection beam facing the screen directly? See page...