Epson Projector Emp 71 User Manual
Here you can view all the pages of manual Epson Projector Emp 71 User Manual. The Epson manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 31
29 Adjusting the Focus This section describes how to adjust the video focus. 1.Turn the focus ring on the projector to adjust the focus. Tip: Focus cannot be achieved if the lens is dirty or covered with condensation. Wipe off any dirt or condensation (See page 64). If adjustment does not succeed, make sure the setup distance is between 39.37inches (1.0m) and 515.75inches (13.1m). Keystone Correction (Using Projector Button) When the foot adjust levers are used to change the projection angle,...
Page 32
30 Adjusting Images (Remote Control Only) [Optimizing Computer Video (Using the Auto button)] This function applies automatically optimized adjustment values to a computer input signal. If the input is a video signal, this function does not operate. Adjusted values set automatically are Tracking, Position (vertical and horizontal), and Sync. Tip: This function cannot optimize the adjustment for some signal types. In these cases, use the Video Menu commands to perform adjustment (See page 43). ...
Page 33
31 Ending After the Projection Ending 1.Press the Power button. A Power Off confirmation message is displayed. 2.Press the Power button again. The projector lamp goes out, the operation display indicator flashes orange, and after cool-down * is complete, the indicator switches to steady orange. Tip: If you do not wish to shut the power, press another button. Or, if no action is taken, the message disappears after 7 seconds. 3.Check that the operation display indicator lights orange. Tip: The...
Page 34
32 4.Pull the power cord plug out of the outlet. Caution: Do not pull the power cord plug out of the outlet while the operation display indicator is flashing orange. This may cause a malfunction or shorten the projector lamp life. 5.Set the remote control R/C switch to Off. Tip: Unless the remote control R/C switch is switched off, a small amount of current will be supplied to the remote control and exhaust the batteries. If the remote control will not be used for a long period or you are moving...
Page 35
33 What You Can Do Using the Wireless Mouse ...................................... 34 Enlarging an Image................................................. 36 Adjusting Image Size.............................................. 37 Adding Image Effects ............................................. 38 Freezing and Deleting Images ................................ 39 Displaying Help Screens ........................................ 40
Page 36
34 Using the Wireless Mouse The remote control included allows you to control a computers mouse operations at a separate location. The Enter button has the same action as a left mouse button, and the Esc button has the same action as a right mouse button. Mouse operation by remote control allows you to make a presentation at the screen without assistance. Presenter Unassisted presentation is possible Tip: If mouse button functions are swapped on your computer, the functions on the remote control...
Page 37
35 Making a Connection Before making a connection, switch off power to the projector and computer. Caution: Connecting a non-USB mouse cable with the power on can cause malfunction or failure. Use only the mouse cable supplied. Any other cable may cause failure. When using a USB mouse, note the following. Windows The only compatible models are those pre-installed with the standard USB interface configuration in Windows2000/Me and Windows98. If the computer is running a version of Windows...
Page 38
36 Enlarging an Image The remote control included lets you enlarge portions of an image. 1.Press the E-Zoom button on the remote control to enlarge or reduce the display on screen. (The Esc button releases this feature.) Tip: 24-step partial enlargement and reduction by factors of 1x-4x is available. 2.Tilt the Enter button up, down, left or right to scroll the projected image in that direction. Magnification factor is displayed. Reduction Enlargement Push up Push downPush right Push left
Page 39
37 Adjusting Image Size The Wide/Tele button on the projector allows you to adjust the size of images. 1.When you press the T (Tele) side of the button, the images are reduced. 2.When you press the W (Wide) side of the button, images are enlarged. Tip: The enlargement/reduction ratio for adjustment with the Wide/Tele button is 0.8 – 1.0 in 32 steps. This function is active until the Reset All menu is executed (See page 51).
Page 40
38 Adding Image Effects Using the Effect1 and Effect2 buttons, you can add effects to images during presentation (to cancel this function, press the Esc button). For effects settings, see Effect Menu (page 46). Cursor/Stamp This effect displays a cursor on the screen and freezes it at a desired location. 1.Press the Effect1 button to display a cursor. 2.Tilt the Enter button to move the cursor to a desired position. 3.Press the Enter button, and the cursor position is displayed as a stamp. Tip: ...