Home > Epson > Projector > Epson Projector Emp 703 User Manual

Epson Projector Emp 703 User Manual

Here you can view all the pages of manual Epson Projector Emp 703 User Manual. The Epson manuals for Projector are available online for free. You can easily download all the documents as PDF.

Page 21

Setting Up the Projector
n  n  n  n  n  n
5
5. To insert the batteries in the remote control device, slide 
off the battery compartment cover.
6. Insert the two AA batteries included with the projector. 
Make sure the polarity of the batteries is correct.
7. Replace the battery compartment cover.
When replacing batteries, take the following precautions:
• Do not recharge the used batteries or expose to fire or 
water.
• Replace batteries as soon as they run out. If the batteries 
leak, wipe away battery...

Page 22

  n  n  n  n
6
Connecting to a Computer
You can connect the projector to a computer capable of VGA, 
SVGA, XGA, SXGA and UXGA output.
To connect the computer and mouse cables (to use the 
wireless remote as a mousepointer), see the section in this 
chapter that applies to your computer.
The illustration below identifies all the interface ports on the 
back of the projector; you may want to refer to this as you 
connect your computer or other equipment to the projector.
Computer AudioIn Out
Mouse/Com...

Page 23

Connecting to a Computer
n  n  n  n  n  n
7
Connecting to a PC Desktop Computer 
To connect the projector to your PC desktop computer, you 
need to:
• Connect the computer cable
• Connect the audio cable (if you’ll be projecting with audio)
Follow the steps in each section for the cables you need to 
connect. Before beginning, turn off the projector and 
computer if they are on.
¨
Note: Computer configurations vary. See your computer 
manual for the location of the ports needed to connect your...

Page 24

  n  n  n  n
8
1. If you will be viewing the video on your computer 
monitor as well as the projector screen, disconnect the 
monitor cable from the video port on the back of your 
computer.
2. Connect one end of the computer cable to the projector’s 
Computer port. 
3. Connect the other end of the computer cable to the 
computer’s video port.
4. Tighten the screws on all connectors.
Connecting the Mouse Cables
If you want to use the remote control as a mouse, you need to 
connect the PS/2 mouse cable or...

Page 25

Connecting to a Computer
n  n  n  n  n  n
9
1. Connect the 9-pin end of the PS/2 mouse cable or, the 
USB mouse cable to the Mouse/Com or USB mouse port 
on the projector.
2. Disconnect your mouse from the mouse port on the back 
of your computer and replace it with the other end of the 
PS/2 mouse cable or USB mouse cable. (Your computer’s 
mouse will be disabled while you are using the remote 
control as a mouse.)
Connecting the Audio Cable
1. If you will be using audio, connect one end of the audio...

Page 26

 
  n  n  n  n 
10  Connecting to a PC Laptop Computer   To connect the projector to your PC laptop computer, you 
need to:
• Connect the computer cable
• Connect the mouse cable (if you want to use the remote 
control as a mouse)
• Connect the audio cable (if you’ll be projecting with audio)
Follow the steps in each section for the cables you need to 
connect. Before beginning, turn off the projector and 
computer if they are on.
  ¨  Note:   Laptop configurations vary. See your computer manual 
for the...

Page 27

 
Connecting to a Computer 
n  n  n  n  n  
n
 
11  Connecting the Mouse Cables  If you want to use the remote control as a mouse, you need to 
connect the PS/2 mouse cable or USB mouse cable.
Refer to this illustration while following the steps below.
1. Connect the 9-pin end of the PS/2 mouse cable or USB 
mouse cable to the Mouse/Com or USB Mouse port on 
the projector.
2. Connect the 6-pin (mini-DIN) end of the PS/2 mouse 
cable or USB mouse cable to the external mouse port or 
USB port on your...

Page 28

 
  n  n  n  n 
12  ¨  Note:   You may have to set the display to appear on both the 
laptop’s screen and the projector. Some laptops let you change this 
setting with the keyboard’s function keys or by using a setup 
utility provided by the computer manufacturer. Check your 
laptop’s manual or online help for instructions.  Connecting the Audio Cable  1. If you will be using audio, connect one end of the audio 
cable to the Audio In jack on the projector.   
2. Connect the other end of the audio cable...

Page 29

 
Connecting to a Computer 
n  n  n  n  n  
n
 
13  Connecting to a Desktop Macintosh   To connect the projector to your desktop Macintosh, you 
need to:
• Connect the computer cable
• Connect the mouse cable (if you want to use the remote 
control as a mouse)
• Connect the audio cable (if you’ll be projecting with audio)
Follow the steps in each section for the cables you need to 
connect. Before beginning, turn off the projector and 
computer if they are on.
  ¨  Note:   Macintosh configurations vary....

Page 30

 
  n  n  n  n 
14  1. Connect one end of the computer cable to the projector’s 
Computer port.
2. Remove the small cover on the Macintosh desktop adapter 
and set its DIP switches in accordance with the resolution 
you want to use (such as 16-inch mode). See your 
Macintosh documentation for instructions. 
Start reading Epson Projector Emp 703 User Manual

Related Manuals for Epson Projector Emp 703 User Manual

All Epson manuals