Epson Projector Emp 703 User Manual

Controlling the Projector
n  n  n  n  n  n
35
Using the Remote Control
To use the remote control, point it towards the remote 
control receivers located at the front of the projector.
To be able to use the remote control as a cordless mouse, 
connect the mouse cable to the projector and your computer.
You can use the remote control up to 10 metres (30 feet) 
from the projector.
¨
Note: The projector may not respond to remote control 
commands in these conditions: ambient light is too bright; a 
certain...

  n  n  n  n
36
This table summarizes the functions on the remote control.   
Button Function
Freeze Keeps the current computer or video image on the 
screen.
A/V Mute Turns off the audio and video output of the projector. 
To turn on the audio and video output, press either the 
A/V mute button or Esc button again.
E-Zoom Pressing the right side of the button enlarges the 
image, pressing the left side of the button reduces the 
image.
To display a portion of the enlarged image which is 
outside of the...

Controlling the Projector
n  n  n  n  n  n
37 Comp Switches to the computer image from Computer.
S-Video Switches to the video image from S-Video.
Video Switches to the image from Video.
Auto Optimizes the computer image.
Resize Switches between the Window display and Resizing 
display.
P in P Displays a subscreen on the main display. To display 
the subscreen, press the PinP button once. To hide 
the subscreen, press it again.
To set the subscreen being displayed, press in the 
following order : 
[Menu]...

  n  n  n  n
38
Using the Operation Panel
You can use the operation panel to control the projector 
instead of the remote control. However, you can program and 
access the custom features only using the remote control. 
The following table summarizes the functions on the 
operation panel.   
Button Function
Power Turns the projector on or off.
Help Displays the Help menu.
Source Switches the image source in order of computer
 ®S-
video
 ®composite video. If there is no S-video input, 
the switch toggles...

Projector Status Indicators
n  n  n  n  n  n
39
Projector Status Indicators
The power and lamp indicators at the top of the projector tell 
you its operating status.
¨
Caution: A red indicator warns you if a serious problem occurs. 
See Chapter 5, “Troubleshooting,” for what to do if a warning 
light comes on.
Operation Indicator
Displays machine condition.
Color Status Meaning
Orange Lit Sleep mode. (The projector is plugged in,
but not projecting.)
Green FlashingThe projector is warming up.
Green Lit...

  n  n  n  n
40
Lamp Indicator
Displays lamp condition.
This indicator is off when the projector is in a normal 
condition.
Temperature Indicator
Displays the internal temperature condition.
This indicator is off when the projector is in a normal 
condition.
Color Status Meaning
- Off Lamp is functioning normally.
Red Lit The lamp needs to be replaced.
Orange Flashing Projection lamp has reached the time to 
replace and will no longer project images. 
Replace the projection lamp with a new 
one.
Red...

  n     n        n     n     n    n     n     n    n    n     n     n      n      n      n
n  n  n  n  n  n
41
3
Using the Projector Menus
The eight projector menus let you to control your projector.
• The Video menu controls the look and quality of the 
projected image, whether the image source is a computer or 
video.
• The Audio menu controls audio features, such as the 
volume level, tone setting.
• The Effect menu lets you define functions for the Effects 
buttons on the remote control.
• The...

  n  n  n  n
42
Accessing the Main Menu
To display the Main menu, press the Menu button on the 
remote control. The Main menu appears:
Press the Menu button again to hide the menu. 
Position
Tracking
Sync.
Brightness
Contrast
Color
Sharpness
Auto Setup
Gamma
ResetAdjustment
Adjustment
Execute :
:
:
:
:
:
:
:9999
99
0
0
0
0 Video
Audio
Effect
Setting
Users Logo
Advanced
About
Reset All
ON OFF
:Select :Enter 

Changing a Menu Setting
n  n  n  n  n  n
43
Changing a Menu Setting
To change a menu setting: 
1. Press the Menu button on the remote control to display 
the Main menu. 
2. Press the top or bottom of the Enter button to scroll 
through the menu choices.
3. Press the Enter button to display a submenu. 
Power
Freeze
A/V MuteE-ZoomR/C ON
OFF3
1524
Enter
Esc
Enter button
Power
Freeze
A/V MuteE-ZoomR/C ON
OFF3
1524
Enter
Esc
Enter button
Power
Freeze
A/V MuteE-ZoomR/C ON
OFF3
1524
Enter
Esc 

  n  n  n  n
44
As you select a menu, a sub menu of options appears to the 
right.
¨
Note: The options available in some submenus vary, depending 
on whether the current image source is the computer or a video 
source.
4. Press the top or bottom of the Enter button to scroll 
through the menu choices.
5. Press the right or left sides of the Enter button to change a 
setting on one of the submenus.
6. When you are finished changing settings, press the Menu 
button again to hide the menu, or press the Esc...