Epson Projector Emp 5300 User Manual

Menu Options
n  n  n  n  n  n
51
Audio Menu 
The Audio menu enables you make adjustments related to 
audio. 
Reset Returns all Video Menu items to their factory defaults. 
Select this item and then press a Click button or the 
 button to display the confirmation screen. 
Next, select Yes and then press a Click button or the 
 button to reset the Video Menu items. If you 
change your mind, select No and then press a Click 
button or the  button to clear the confirmation 
screen without changing any...

Using the Projector Menus
  n  n  n  n
52
Options Menu
The Options menu enables you to adjust basic settings that 
normally do not need changing.
Menu item Description
Prompt Temporarily displays a prompt on the projector screen 
to identify which source (computer or video) is 
providing the image.
Color Temp. Adjusts the whiteness of the screen. The H setting 
provides a cold white, M standard white, L a warm 
white, and U sets sub-brightness R, B. 
Selecting the User item and pressing a Click button or...

Menu Options
n  n  n  n  n  n
53 View Change Specifies the view change to use when the input 
source is changed. 
OFF: No visual effects, simply cut to new source.
Diagonal : Original source screen shrinks from upper 
left to lower right, and new source screen 
expands from upper left to lower right.
Left 
® Right : Original source screen shrinks from left 
to right, and new source screen 
expands from left to right.
Fade : Original source screen shrinks from outside in, 
and new source screen expands...

Using the Projector Menus
  n  n  n  n
54
Custom Menu 
The Custom menu allows you to select special features such as 
zoom, preview, or strobe effects. Unlike the other menus, 
which use the Enter button to select a menu option, the 
Custom menu requires that you use the Custom button to 
select a Custom menu option.
The Custom button is located on the lower part of the remote 
control. 
To open the Custom menu, press the top multi-purpose 
button or select CUSTOM from the Main menu. ZOOM is 
highlighted...

Menu Options
n  n  n  n  n  n
55 Zoom Out Each press of the remote control’s top 
multi-purpose button zooms out on the 
center of the displayed image, reducing it 
+0.25 times.
Zoom Screen 
ShiftPress the pointer button to zoom in on a 
portion of the enlarged display. You can 
move the image up, down, left, right, and 
diagonally to closely view any part of the 
display.
Preview Press the bottom multi-purpose button 
then check if the value next to the Preview 
menu is New Set or Present Set. If the...

Using the Projector Menus
  n  n  n  n
56Number of 
Frames, TimePress the top multi-purpose button while 
the strobe effect is running to display a 
screen specifying the number of frames 
flashed and the time interval between 
them. You can specify the number of 
frames as 4, 9, or 16, and the time interval 
from 0.1 to 1 second in 0.1 second 
increments.
Press the top multi-purpose button again 
to clear the setting screen. Menu item Function Description 

Menu Options
n  n  n  n  n  n
57
About Menu
The About menu displays the following information about 
your projector.
RESET ALL Menu 
Executing this command resets the settings in all menus to 
their factory defaults.
While executing this command, the OSD menu disappears 
from a screen and RESET ALL will be flashing on the 
center of the screen.
Select this item and then press a Click button or the  
button to display the confirmation screen. 
Next, select Yes and then press a Click button or the  
button...

Using the Projector Menus
  n  n  n  n
58 

  n     n        n     n     n    n     n     n    n    n     n     n      n      n      n
n  n  n  n  n  n
59
4
Using the Projector Software
The Link Set package includes materials necessary to use the 
ELP Link III V2.0 utility. This utility runs on your computer 
to control projector features and to configure buttons on the 
remote control. ELP Link III V2.0 has two functions related 
to your EPSON projector.  

Using the Projector Software
  n  n  n  n
60
Presentation support function
The presentation support function allows you to perform real-
time presentation effectively by a remote control shipped with 
the projector. 
Projector setting function 
The projector setting function allows you to control the 
projector from your  computer. 
¨
Note: See the ELP Link III V2.0 demonstration included in the 
Projector Software CD-ROM. 
System requirements
To use the ELP Link III V2.0 utility and to look at the PDF...