Epson Projector Emp 5300 User Manual

Accessing the Projector Software
n  n  n  n  n  n
71
Accessing the Projector Software
To access the EPSON projector software, follow the steps 
below. 
For Windows 95 and NT 4.0 users
ELP Link III V2.0
Click Start, point to Programs, and ELPLink3, then select 
ELPLink3. 
User’s Guide
Click Start, point to Programs, and ELPLink3, then select 
User’s Guide.
¨
Note: Make sure that Acrobat Reader is installed on your PC 
before accessing the User’s Guide. 
Demonstration
Insert the CD-ROM into the CD-ROM...

Using the Projector Software
  n  n  n  n
72
User’s Guide
Open the Program Manager and double-click the ELPLink3 
group. Then double-click the User’s Guide icon. 
¨
Note: Make sure that Acrobat Reader is installed on your PC 
before accessing the User’s Guide. 
Demonstration
Insert the CD-ROM into the CD-ROM drive and click the 
View Demonstration button in the Install Program main 
window. 
For Macintosh users
ELP Link III V2.0
Open the ELPLink3 folder, then double-click the ELP Link 3 
icon. 
User’s...

Installing or Accessing the Projector Software on the CD-ROM Directly
n  n  n  n  n  n
73
Installing or Accessing the Projector 
Software on the CD-ROM Directly
When you install or access the software on the CD-ROM 
directly, follow the instructions below. 
For Windows users 
ELP Link III V2.0
Open the DATA folder, then the ENGLISH folder. Open the 
ELPLink3 folder,  then your OS folder. Double-click SETUP. 
EXE.
Acrobat Reader 
Open the DATA folder, then the ENGLISH folder and AR 
folder. Then open the...

Using the Projector Software
  n  n  n  n
74
For Macintosh users
ELP Link III V2.0
Open the DATA folder, then the English folder. Copy the 
ELPLink3 folder to your hard disk. 
Acrobat Reader
Open the DATA folder, then the English folder.  Open the  
PDF_FILE folder, then the AR folder. Double-click the 
Reader 3.01 Installer icon. 
User’s Guide (PDF) 
Open the DATA folder, then the English folder.  Open the 
PDF_FILE folder, then copy the User’s Guide file to your 
hard disk. 
Demonstration 
Open the...

  n     n        n     n     n    n     n     n    n    n     n     n      n      n      n
n  n  n  n  n  n
75
5
Maintenance
The projector needs little maintenance. You should keep the 
lens clean  because any dirt or stains will appear on the screen. 
You will also need to clean the air filter located at the bottom 
of the projector periodically. It is important to keep the air 
filter clean because a clogged air filter prevents proper 
ventilation which is necessary to cool the projector and 
prevent...

Maintenance
  n  n  n  n
76
Cleaning the Lens
Clean the lens whenever you notice dirt or dust on the 
surface. Wipe the lens surface gently with a soft, dry, lint-free 
cloth.
To remove dirt or stains on the lens, moisten a soft cloth with 
water and a neutral detergent and gently wipe the lens surface.
Cleaning the Projector Case
To clean the projector case, first unplug the power cable. To 
remove dirt or dust, wipe the casing with a soft, dry, lint-free 
cloth. To remove stubborn dirt or stains,...

Cleaning the Air Filter
n  n  n  n  n  n
77
Cleaning the Air Filter
The air filter, which is located at the bottom of the projector, 
should be cleaned after every 100 hours of use. If it is not 
cleaned periodically, it can become clogged with dust and 
prevent the projector from being ventilated properly. This can 
cause overheating and damage the projector.
To clean the air filter:
1. Switch the projector off and unplug the power cable from 
the wall socket.
2. Stand the projector with the handle at...

Maintenance
  n  n  n  n
78
4. The air filter is attached to the inside of the projector. To 
clean the filter you are advised to use a small vacuum 
cleaner designed for computers and other office 
equipment. If you do not have one, use a dry, lint-free 
cloth.
If the dirt is difficult to remove or if the filter is torn, 
replace it. 
An air filter come with replacement lamps.
Contact your EMP-7300/7200/5300 dealer or call an 
EPSON Service Centre.
Be sure to request part number. (ELPLP05)
5. Replace...

Replacing the Lamp
n  n  n  n  n  n
79
3. Use a screwdriver, coin, or similar object to loosen the 
two retaining screws on the lamp cover. When the screws 
are loose, lift off the lamp cover. (You cannot remove 
these screws.)
4. Use a screwdriver, coin, or similar object to loosen the 
two screws holding the lamp in position. (You cannot 
remove these screws.)
5. Lift up the handle and pull out the lamp. 
2
1
2
1 

Maintenance
  n  n  n  n
80
6. Gently insert the new lamp by lowering it into position. 
Make sure it is inserted securely.
7. Tighten the screws you loosened in step 4.
8. Replace the lamp cover and tighten the cover screws. 
(Make sure the lamp cover is securely fastened. The 
projector turns itself off if the lamp cover is open.)