Epson Projector Emp 52 User Manual

49 * If set to sRGB, the colour temperature for the Color Adjustment command in the 
Advanced menu will be set to 6500K. Color Mode Corrects the vividness of the image colour. The settings 
can be saved separately for each type of source (computer 
or video source). You can select from six different quality 
settings depending on the surroundings.
sRGB
: Images conform to the sRGB standard.*
 Normal : Brightness is emphasised. For presentation in 
bright rooms.
 Meeting: Images are modulated using...

50
Tip :
The Audio menu settings are saved individually for each input signal source.
Audio Menu
Sub-menuFunctionDefault
Volume Adjusts the volume. Median 
value (10)
Tone Adjusts the tone. Median 
value (0)
Audio Input Selects the input source for audio signals. 
The default setting varies depending on the type of signal 
being input (for computer, component video and RGB 
video input signals: Computer; for video input signals: 
Video). Therefore, if audio signals are being input to a 
different port...

51
Setting Menu
Sub-menuFunctionDefault
Keystone Corrects vertical keystone distortion in images.
 When keystone correction is carried out, the 
projected image will become smaller.
 If the images become uneven in appearance after 
keystone correction is carried out, decrease the 
sharpness setting.Median 
value (0)
No-Signal Msg. Sets the message status and background colour at 
times such as when no image signal is being input.
When set to OFF, the background colour becomes 
black and no message is...

52 Reset Resets all adjustment values for the Setting menu 
functions to their default settings.
 Press the [Enter] button to display the confirmation 
screen, and select Yes.
 Select Reset All to return all menu settings–
including settings for the Video and Audio 
menus–to their default settings. (p.55)-
Advanced Menu
Sub-menuFunctionDefault
Language Sets the language for message displays.
 Press the [Enter] button and select the language from 
the selection menu that appears.English
Color...

53  RGB : Sets the colour intensity for each RGB (red/
green/blue) colour in the image. 
Press the [Enter] button, select R (red), 
G (green) or B (blue) and make the 
adjustment in the colour adjustment sub-
menu that appears.
You can adjust the colours while viewing the 
results on the screen. 
(This item cannot be selected if sRGB has been 
selected as the Color Mode setting in the Video 
menu.)
Rear Proj. Use when projecting images from behind a translucent 
screen. 
When set to ON, the projected...

54
 The About menu shows the setting details for the current image source.
 The Lamp item appears as 0H for 0–10 hours, and after that, it appears in 
units of 1 hour.
Computer/RGB video/ Video (S-Video, Composite video)
Component video 
(Analogue-RGB, YCbCr
, YPbPr)
About Menu
Sub-menuFunctionDefault
Lamp Displays the cumulative lamp operating time.
 When the lamp warning period is reached, the display 
characters appear in red.0H
Reset Lamp 
TimerInitialises the lamp operating time. When this...

55 SYNC Mode Displays the sync attributes.
(Does not appear when the input source is composite 
video or S-Video.)-
Resolution Displays the input resolution.
(Does not appear when the input source is composite 
video or S-Video.)-
Refresh 
Rate
Displays the refresh rate.
(Does not appear when the input source is composite 
video or S-Video.)-
Reset All Menu
Sub-menuFunctionDefault
Execute Resets all items in all menus to their default settings.
 Press the [Enter] button to display the confirmation...

56
Using the Configuration Menus
The configuration menus can be operated using the remote control only.
Procedure
1Press the [Menu] button on the 
remote control.
The main menu will be displayed.
2Select a menu item.
Press the [ ] or [ ] button to move to an 
item to be selected.
3Confirm the selection.
Press the [Enter] button to confirm the 
selection of a menu item.
The selected sub-menu will then be 
displayed. 
4Select a sub-menu item.
Press the [ ] or [ ] button to move to an 
item to be selected....

57
5Select a setting value.
Press the [ ] and [ ] buttons to change 
the setting value.
For commands which have ON/OFF 
settings, use the [ ] and [ ] buttons to 
select the desired setting, and then press 
the [Enter] button.
Tip :
 Sub-menu items which cause another sub-menu to be displayed when they are selected 
have   after them. If you select such menu items and press the [Enter] button, you 
can then change the settings in the next sub-menu which appears.
 Refer to List of Functions for details...