Epson Projector Emp 52 User Manual
Have a look at the manual Epson Projector Emp 52 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1734 Epson manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 46
44
Wide-screen Projection of Component Video and Video
Images (Changing the Aspect Ratio)
This function changes the aspect ratio of images from 4:3 to 16:9 when
component video images (YCbCr and YPbPr) or video images (S-Video or
composite video) are being projected. Images which have been recorded in
digital video or onto DVDs can be viewed in 16:9 wide-screen format.
Procedure
1Press the [Menu] button on the
remote control, and then select
Aspect Ratio from the
Video menu.
For details on this...](http://img.usermanuals.tech/thumb/23/89771/w64_epson-emp-52-manual_d-45.png "Page 46
44
Wide-screen Projection of Component Video and Video
Images (Changing the Aspect Ratio)
This function changes the aspect ratio of images from 4:3 to 16:9 when
component video images (YCbCr and YPbPr) or video images (S-Video or
composite video) are being projected. Images which have been recorded in
digital video or onto DVDs can be viewed in 16:9 wide-screen format.
Procedure
1Press the [Menu] button on the
remote control, and then select
Aspect Ratio from the
Video menu.
For details on this...")
![Page 47
45
E-Zoom
This function lets you enlarge and reduce a part of projected images such as
graphs and tables.
Procedure
1Press the [E-Zoom ] button on the
remote control.
A cursor (cross) indicating the centre
point for the area to be enlarged will
appear on the screen.
2Move the cross to the area of the
image that is to be enlarged or
reduced.
Press the [ ], [ ], [ ] and [ ] buttons
on the remote control to move the cross.
3When [ ] is pressed, the image is
enlarged with the cross as its centre....](http://img.usermanuals.tech/thumb/23/89771/w64_epson-emp-52-manual_d-46.png "Page 47
45
E-Zoom
This function lets you enlarge and reduce a part of projected images such as
graphs and tables.
Procedure
1Press the [E-Zoom ] button on the
remote control.
A cursor (cross) indicating the centre
point for the area to be enlarged will
appear on the screen.
2Move the cross to the area of the
image that is to be enlarged or
reduced.
Press the [ ], [ ], [ ] and [ ] buttons
on the remote control to move the cross.
3When [ ] is pressed, the image is
enlarged with the cross as its centre....")
![Page 49
47
Video Menu
Sub-menuFunctionDefault
Position Moves the image display position vertically and
horizontally.
Press the [Enter] button and make the adjustment using
the display position adjustment sub-menu that appears.Depends on
connection
Tracking
Adjusts computer images when vertical stripes appear in
the images.Depends on
connection
Sync.
Adjusts computer images when flickering, fuzziness or
interference appear in the images.
Flickering and fuzziness may also appear when the
brightness,...](http://img.usermanuals.tech/thumb/23/89771/w64_epson-emp-52-manual_d-48.png "Page 49
47
Video Menu
Sub-menuFunctionDefault
Position Moves the image display position vertically and
horizontally.
Press the [Enter] button and make the adjustment using
the display position adjustment sub-menu that appears.Depends on
connection
Tracking
Adjusts computer images when vertical stripes appear in
the images.Depends on
connection
Sync.
Adjusts computer images when flickering, fuzziness or
interference appear in the images.
Flickering and fuzziness may also appear when the
brightness,...")
![Page 50
48 * If set to sRGB, the colour temperature for the Color Adjustment command in the
Advanced menu will be set to 6500K.
Component (YCbCr, YPbPr) Video (S-Video, Composite video)
Video Menu
Reset Resets all adjustment values for the Video menu
functions except for the Input Signal setting to their
default settings.
Press the [Enter] button to display the confirmation
screen, and select Yes.
Select Reset All to return all menu settings to their
default settings. (p.55)-
Sub-menuFunctionDefault...](http://img.usermanuals.tech/thumb/23/89771/w64_epson-emp-52-manual_d-49.png "Page 50
48 * If set to sRGB, the colour temperature for the Color Adjustment command in the
Advanced menu will be set to 6500K.
Component (YCbCr, YPbPr) Video (S-Video, Composite video)
Video Menu
Reset Resets all adjustment values for the Video menu
functions except for the Input Signal setting to their
default settings.
Press the [Enter] button to display the confirmation
screen, and select Yes.
Select Reset All to return all menu settings to their
default settings. (p.55)-
Sub-menuFunctionDefault...")
![Page 54
52 Reset Resets all adjustment values for the Setting menu
functions to their default settings.
Press the [Enter] button to display the confirmation
screen, and select Yes.
Select Reset All to return all menu settings–
including settings for the Video and Audio
menus–to their default settings. (p.55)-
Advanced Menu
Sub-menuFunctionDefault
Language Sets the language for message displays.
Press the [Enter] button and select the language from
the selection menu that appears.English
Color...](http://img.usermanuals.tech/thumb/23/89771/w64_epson-emp-52-manual_d-53.png "Page 54
52 Reset Resets all adjustment values for the Setting menu
functions to their default settings.
Press the [Enter] button to display the confirmation
screen, and select Yes.
Select Reset All to return all menu settings–
including settings for the Video and Audio
menus–to their default settings. (p.55)-
Advanced Menu
Sub-menuFunctionDefault
Language Sets the language for message displays.
Press the [Enter] button and select the language from
the selection menu that appears.English
Color...")
![Page 55
53 RGB : Sets the colour intensity for each RGB (red/
green/blue) colour in the image.
Press the [Enter] button, select R (red),
G (green) or B (blue) and make the
adjustment in the colour adjustment sub-
menu that appears.
You can adjust the colours while viewing the
results on the screen.
(This item cannot be selected if sRGB has been
selected as the Color Mode setting in the Video
menu.)
Rear Proj. Use when projecting images from behind a translucent
screen.
When set to ON, the projected...](http://img.usermanuals.tech/thumb/23/89771/w64_epson-emp-52-manual_d-54.png "Page 55
53 RGB : Sets the colour intensity for each RGB (red/
green/blue) colour in the image.
Press the [Enter] button, select R (red),
G (green) or B (blue) and make the
adjustment in the colour adjustment sub-
menu that appears.
You can adjust the colours while viewing the
results on the screen.
(This item cannot be selected if sRGB has been
selected as the Color Mode setting in the Video
menu.)
Rear Proj. Use when projecting images from behind a translucent
screen.
When set to ON, the projected...")
49 * If set to sRGB, the colour temperature for the Color Adjustment command in the Advanced menu will be set to 6500K. Color Mode Corrects the vividness of the image colour. The settings can be saved separately for each type of source (computer or video source). You can select from six different quality settings depending on the surroundings. sRGB : Images conform to the sRGB standard.* Normal : Brightness is emphasised. For presentation in bright rooms. Meeting: Images are modulated using their original tints, with no colour enhancement. Presentation: For presentations in dark rooms. Theatre : Movie images are optimised using natural tints. The black & white extension function operates so that differences in colour gradations (darkness and lightness of colours) are accentuated even for images that are very dark or very bright, to make them easier to view. Game : Brightness is emphasised. Ideal for playing video games in bright rooms.Theatre Input Signal (Adjustment is only possible when component video signals are being input.) Selects the input source to be used.Depends on connection Video Signal (Adjustment is only possible when composite video/S- Video signals are being input.) Sets the video signal format. Press the [Enter] button, and choose the setting from the video signal format selection sub-menu which appears. When set to Auto, the video signal format is set automatically.Auto Aspect Ratio Sets the aspect ratio for projected images. Depends on connection Reset Resets all adjustment values for the Video menu functions except for the Input Signal and Video Signal setting to their default settings. Press the [Enter] button to display the confirmation screen, and select Yes. Select Reset All to return all menu settings to their default settings. (p.55)- Sub-menuFunctionDefault Using the Configuration Menu Functions
50
Tip :
The Audio menu settings are saved individually for each input signal source.
Audio Menu
Sub-menuFunctionDefault
Volume Adjusts the volume. Median
value (10)
Tone Adjusts the tone. Median
value (0)
Audio Input Selects the input source for audio signals.
The default setting varies depending on the type of signal
being input (for computer, component video and RGB
video input signals: Computer; for video input signals:
Video). Therefore, if audio signals are being input to a
different port from the default port, you will need to
select the audio signal input source.
Computer: Audio signals will be input to the stereo mini
jack (left side).
Video : Audio signals will be input to the RCA pin
jack (left side).Depends on
connection
Reset Resets all adjustment values for the Audio menu
functions to their default settings.
Press the [Enter] button to display the confirmation
screen, and select Yes.
Select Reset All to return all menu settings to their
default settings. (p.55)-
+ -+ -
Tone
Reset Volume
Execute
10
Video
Audio
Setting
Advanced
About
Reset All:
0 :
: Select : Enter
Audio Input:ComputerVideo
Using the Configuration Menu Functions
51 Setting Menu Sub-menuFunctionDefault Keystone Corrects vertical keystone distortion in images. When keystone correction is carried out, the projected image will become smaller. If the images become uneven in appearance after keystone correction is carried out, decrease the sharpness setting.Median value (0) No-Signal Msg. Sets the message status and background colour at times such as when no image signal is being input. When set to OFF, the background colour becomes black and no message is displayed.Blue Prompt Sets whether the input signal name is displayed on the screen or not when the input signal is changed.ON Color Mode PromptSets whether the colour mode prompt is displayed on the screen or not when the colour mode is changed.ON A/V Mute Sets the screen status when the [A/V Mute] button on the remote control is pressed.Black Sleep Mode Sets the energy saving operation when no signal is being input. When set to ON, projection stops automatically and then after the cool-down period is finished, the projector changes to sleep mode if no operations are carried out for 30 minutes while the No- Signal. message is being displayed. (The Power indicator lights orange.) Projection starts again when the [Power] button on the projectors control panel or the remote control is pressed.ON + - ResetExecute Keystone 0 No-Signal Msg. OFF Prompt ON OFF ON OFF Color Mode PromptBlack Blue Sleep Mode ON OFF A/V MuteBlack Blue Video Audio Setting Advanced About Reset All: : Select : Enter : : : :: : Using the Configuration Menu Functions
52 Reset Resets all adjustment values for the Setting menu functions to their default settings. Press the [Enter] button to display the confirmation screen, and select Yes. Select Reset All to return all menu settings– including settings for the Video and Audio menus–to their default settings. (p.55)- Advanced Menu Sub-menuFunctionDefault Language Sets the language for message displays. Press the [Enter] button and select the language from the selection menu that appears.English Color AdjustmentAdjusts the colour temperature and intensity of each RGB colour for each input source. Color Temp.: Lets you adjust bright colours within a range from reddish tinges to bluish tinges. If the colour temperature is lower, colours appear reddish and colour tones appear softer. If the colour temperature is higher, colours appear bluish and colour tones appear sharper. Press the [Enter] button and make the adjustment in the colour adjustment sub- menu that appears.Color Te m p . : Depends on connection Sub-menuFunctionDefault : Select : Enter Video Audio Setting Advanced About Reset AllColor Adjustment Color Temp. RGB Rear Proj . Ceiling ON OFF LanguageSelect [English] ResetExecute AdjustON OFF : : : Using the Configuration Menu Functions
53 RGB : Sets the colour intensity for each RGB (red/ green/blue) colour in the image. Press the [Enter] button, select R (red), G (green) or B (blue) and make the adjustment in the colour adjustment sub- menu that appears. You can adjust the colours while viewing the results on the screen. (This item cannot be selected if sRGB has been selected as the Color Mode setting in the Video menu.) Rear Proj. Use when projecting images from behind a translucent screen. When set to ON, the projected images are horizontally reversed.OFF Ceiling Use when installing the projector to a ceiling. When set to ON, the projected images are horizontally and vertically reversed.OFF Reset Resets all adjustment values for the Advanced menu functions except for the Language setting to their default settings. Press the [Enter] button to display the confirmation screen, and select Yes. Select Reset All to return all menu settings including settings for the Video and Audio menus to their default settings. (p.55)- Using the Configuration Menu Functions
54 The About menu shows the setting details for the current image source. The Lamp item appears as 0H for 0–10 hours, and after that, it appears in units of 1 hour. Computer/RGB video/ Video (S-Video, Composite video) Component video (Analogue-RGB, YCbCr , YPbPr) About Menu Sub-menuFunctionDefault Lamp Displays the cumulative lamp operating time. When the lamp warning period is reached, the display characters appear in red.0H Reset Lamp TimerInitialises the lamp operating time. When this command is selected, the cumulative lamp operating time is reset to the initial default value.- Video Source Displays the input source which is currently being projected. Input Signal Displays the input signal settings. (Does not appear when the input source is composite video or S-Video.) Video Signal Shows the video signal format. (Does not appear when the input source is computer, component video or RGB video.)- Frequency Displays the horizontal and vertical scanning frequencies. (Does not appear when the input source is composite video or S-Video.)- SYNC PolarityDisplays the sync polarity. (Does not appear when the input source is composite video or S-Video.)- : Select : Enter Video Audio Setting Advanced About Reset All Frequency Video Source V ---.--Hz Reset Lamp Timer H ---.--kHz Lamp 0H SYNC Mode SYNC Polarity ------V ------ H ------ Resolution Refresh Rate ---.--Hz--- x--- Computer Input Signal : : : : : : : : RGB ExecuteVideo Auto (----) : Select : Enter Video Audio Setting Advanced About Reset All Video Source Reset Lamp Timer Lamp 0H Video Signal: : :Execute Using the Configuration Menu Functions
55 SYNC Mode Displays the sync attributes. (Does not appear when the input source is composite video or S-Video.)- Resolution Displays the input resolution. (Does not appear when the input source is composite video or S-Video.)- Refresh Rate Displays the refresh rate. (Does not appear when the input source is composite video or S-Video.)- Reset All Menu Sub-menuFunctionDefault Execute Resets all items in all menus to their default settings. Press the [Enter] button to display the confirmation screen, and select Yes. Select Reset in an individual menu to reset only the settings for the items in each sub-menu. The Input Signal, Video Signal, Lamp and Language settings will not return to their default settings.- Sub-menuFunctionDefault Execute : Select : Execute Video Audio Setting Advanced About Reset All Using the Configuration Menu Functions
56 Using the Configuration Menus The configuration menus can be operated using the remote control only. Procedure 1Press the [Menu] button on the remote control. The main menu will be displayed. 2Select a menu item. Press the [ ] or [ ] button to move to an item to be selected. 3Confirm the selection. Press the [Enter] button to confirm the selection of a menu item. The selected sub-menu will then be displayed. 4Select a sub-menu item. Press the [ ] or [ ] button to move to an item to be selected. The items appearing in the Video menu and the About menu will vary depending on the type of input source being projected. MenuA/V Mute E-ZoomFreeze Enter Remote control Video Audio Setting Advanced About Reset All LanguageSelect [English] ResetExecute Color Temp. RGBAdjust Ceiling : ON OFF Color Adjustment : Rear Proj . : ON OFF Color Adjustment Rear Proj . Ceiling : ON OFF LanguageSelect [English] ResetExecute Color Temp. RGBAdjust: : ON OFF Using the Configuration Menu Functions
57 5Select a setting value. Press the [ ] and [ ] buttons to change the setting value. For commands which have ON/OFF settings, use the [ ] and [ ] buttons to select the desired setting, and then press the [Enter] button. Tip : Sub-menu items which cause another sub-menu to be displayed when they are selected have after them. If you select such menu items and press the [Enter] button, you can then change the settings in the next sub-menu which appears. Refer to List of Functions for details on the functions of each menu item. (p.46) 6Select other menu items in the same way. Repeat steps 2 to 5 to change the setting for other menu items. To return to a previous menu, press the [ESC] button. 7Close the menu. Press the [Menu] button. Color Adjustment Color Temp. 8000K+ -: Using the Configuration Menu Functions