Epson Projector Emp 52 User Manual
Have a look at the manual Epson Projector Emp 52 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1734 Epson manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 20
18
Projecting Images from the Computer
Use the accessory computer cable to connect the Computer/Component Video
port on the left side of the projector to the monitor port of the computer.
Tip :
Change the Input Signal setting in the Video menu to RGB after making the
connections. (p.47)
If more than one external component is connected to the projector, use the [Source]
button on the projectors control panel or the [Computer] button on the remote control
to select the Computer port as the input...](http://img.usermanuals.tech/thumb/23/89771/w64_epson-emp-52-manual_d-19.png "Page 20
18
Projecting Images from the Computer
Use the accessory computer cable to connect the Computer/Component Video
port on the left side of the projector to the monitor port of the computer.
Tip :
Change the Input Signal setting in the Video menu to RGB after making the
connections. (p.47)
If more than one external component is connected to the projector, use the [Source]
button on the projectors control panel or the [Computer] button on the remote control
to select the Computer port as the input...")
![Page 21
19
Use the following procedure to adjust the volume of the sound output.
Procedure
1Press the [Menu] button on the
remote control, and then select
Volume from the Audio
menu.
For details on this operation, refer to
Using the Configuration Menus.
(p.56)
2Use the [ ] and [ ] buttons to
adjust the volume.
The volume is increased or reduced
each time a button is pressed.
3After making the adjustment, press the [Menu] button to exit
the configuration menu.
Stereo mini jack audio cable...](http://img.usermanuals.tech/thumb/23/89771/w64_epson-emp-52-manual_d-20.png "Page 21
19
Use the following procedure to adjust the volume of the sound output.
Procedure
1Press the [Menu] button on the
remote control, and then select
Volume from the Audio
menu.
For details on this operation, refer to
Using the Configuration Menus.
(p.56)
2Use the [ ] and [ ] buttons to
adjust the volume.
The volume is increased or reduced
each time a button is pressed.
3After making the adjustment, press the [Menu] button to exit
the configuration menu.
Stereo mini jack audio cable...")
![Page 24
22
Projecting S-Video Images
Use an S-Video cable (commercially-available) to connect the video source to
the S-Video port on the left side of the projector.
Tip :
If more than one external component is connected to the projector, use the [Source]
button on the projectors control panel or the [S-Video/Video] button on the remote
control to select the S-Video port as the input source. (p.30)
Projecting Component Video Images
Use the optional component video cable to connect the video source to the...](http://img.usermanuals.tech/thumb/23/89771/w64_epson-emp-52-manual_d-23.png "Page 24
22
Projecting S-Video Images
Use an S-Video cable (commercially-available) to connect the video source to
the S-Video port on the left side of the projector.
Tip :
If more than one external component is connected to the projector, use the [Source]
button on the projectors control panel or the [S-Video/Video] button on the remote
control to select the S-Video port as the input source. (p.30)
Projecting Component Video Images
Use the optional component video cable to connect the video source to the...")
![Page 25
23
Tip :
Change the Input Signal setting in the Video menu to YCbCr or YPbPr
after making the connections. (p.49)
If more than one external component is connected to the projector, use the [Source]
button on the projectors control panel or the [Computer] button on the remote control
to set the input source to YCbCr or YPbPr , depending on the type of signal being
input. (p.30)
Projecting RGB Video Images
RGB video is used when RGB signals that have copy protection added are input
and projected....](http://img.usermanuals.tech/thumb/23/89771/w64_epson-emp-52-manual_d-24.png "Page 25
23
Tip :
Change the Input Signal setting in the Video menu to YCbCr or YPbPr
after making the connections. (p.49)
If more than one external component is connected to the projector, use the [Source]
button on the projectors control panel or the [Computer] button on the remote control
to set the input source to YCbCr or YPbPr , depending on the type of signal being
input. (p.30)
Projecting RGB Video Images
RGB video is used when RGB signals that have copy protection added are input
and projected....")
![Page 26
24
Playing Sound from the Video Equipment
The projector has a single built-in speaker with a maximum output of 1 W. You
can output sound from the video equipment through the projectors built-in
speaker by connecting the video equipments audio output port and the Audio
port (RCA monaural jack) on the left side of the projector using an RCA audio
cable (commercially-available).
Use the following procedure to adjust the volume of the sound output.
Procedure
1Press the [Menu] button on the
remote...](http://img.usermanuals.tech/thumb/23/89771/w64_epson-emp-52-manual_d-25.png "Page 26
24
Playing Sound from the Video Equipment
The projector has a single built-in speaker with a maximum output of 1 W. You
can output sound from the video equipment through the projectors built-in
speaker by connecting the video equipments audio output port and the Audio
port (RCA monaural jack) on the left side of the projector using an RCA audio
cable (commercially-available).
Use the following procedure to adjust the volume of the sound output.
Procedure
1Press the [Menu] button on the
remote...")
19 Use the following procedure to adjust the volume of the sound output. Procedure 1Press the [Menu] button on the remote control, and then select Volume from the Audio menu. For details on this operation, refer to Using the Configuration Menus. (p.56) 2Use the [ ] and [ ] buttons to adjust the volume. The volume is increased or reduced each time a button is pressed. 3After making the adjustment, press the [Menu] button to exit the configuration menu. Stereo mini jack audio cable (commercially-available) To audio output port To Audio port + -+ -Video Audio Setting Advanced About : Select : Return : Adjust Reset AllVolume Tone: : Reset Execute 10 0 : Audio InputComputerVideo + -+ -Video Audio Setting Advanced About : Select : Return : Adjust Reset AllVolume Tone: : Reset Execute 15 0 : Audio InputComputerVideo Connecting to a Computer
20 Connecting to an External Monitor Images can be viewed on an external computer monitor at the same time they are being projected by the projector. Use the cable provided with the computer monitor to connect the monitor to the Monitor Out port at the left side of the projector. Tip : Video images cannot be output to an external monitor. The setting gauge for keystone correction and the configuration menus and help menus are not output to the external monitor. Cable provided with monitorTo Monitor Out port (black) Monitor port Connecting to a Computer
21 Connecting to a Video Source Caution : When connecting the projector to other video sources, take the following precautions. • Turn off the power for both the projector and the video source before connecting them. If the power for either device is on at the time of connection, damage may result. Check the shapes of the cable connectors and the device ports before making the connections. If you try to force a connector to fit a device port with a different shape or number of terminals, a malfunction or damage to the connector or port may result. Projecting Composite Video Images Use a RCA video cable (commercially-available) to connect the video source to the Video port on the left side of the projector. Tip : If more than one external component is connected to the projector, use the [Source] button on the projectors control panel or the [S-Video/Video] button on the remote control to select the Video port as the input source. (p.30) To video output port (yellow) To Video port RCA video cable (commercially-available)
22 Projecting S-Video Images Use an S-Video cable (commercially-available) to connect the video source to the S-Video port on the left side of the projector. Tip : If more than one external component is connected to the projector, use the [Source] button on the projectors control panel or the [S-Video/Video] button on the remote control to select the S-Video port as the input source. (p.30) Projecting Component Video Images Use the optional component video cable to connect the video source to the Computer/Component Video port on the left side of the projector. See Appendices: Optional Accessories (p.80) S-Video cable (commercially-available) To S-Video port To S-Video output port Component video cable (optional) To component video output port To Computer/ Component Video port (blue) Connecting to a Video Source
23 Tip : Change the Input Signal setting in the Video menu to YCbCr or YPbPr after making the connections. (p.49) If more than one external component is connected to the projector, use the [Source] button on the projectors control panel or the [Computer] button on the remote control to set the input source to YCbCr or YPbPr , depending on the type of signal being input. (p.30) Projecting RGB Video Images RGB video is used when RGB signals that have copy protection added are input and projected. Use the accessory computer cable to connect the video source to the Computer/Component Video port on the left side of the projector. Tip : Change the Input Signal setting in the Video menu to RGB after making the connections. (p.47) For a RGB connection, a commercially available adapter or converter cable might be required. To RGB output port To Computer/ Component Video port (blue) Computer cable (accessory) Connecting to a Video Source
24 Playing Sound from the Video Equipment The projector has a single built-in speaker with a maximum output of 1 W. You can output sound from the video equipment through the projectors built-in speaker by connecting the video equipments audio output port and the Audio port (RCA monaural jack) on the left side of the projector using an RCA audio cable (commercially-available). Use the following procedure to adjust the volume of the sound output. Procedure 1Press the [Menu] button on the remote control, and then select Volume from the Audio menu. For details on this operation, refer to Using the Configuration Menus. (p.56) RCA audio cable (commercially-available) To audio output port To Audio port + -+ -Video Audio Setting Advanced About : Select : Return : Adjust Reset AllVolume Tone: : Reset Execute 10 0 : Audio InputComputerVideo Connecting to a Video Source
25 2Use the [ ] and [ ] buttons to adjust the volume. The volume is increased or reduced each time a button is pressed. 3After making the adjustment, press the [Menu] button to exit the configuration menu. + -+ -Video Audio Setting Advanced About : Select : Return : Adjust Reset AllVolume Tone: : Reset Execute 15 0 : Audio InputComputerVideo Connecting to a Video Source
27 Basic Operations This chapter describes basic operations such as turning projection on and off and adjusting the projected images. Turning On the Projector ..................................................28 Connecting the Power Cable............................................................... 28 Turning On the Power and Projecting Images .................................. 29 Turning Off the Projector ..................................................31 Adjusting the Screen Image .............................................33 Adjusting the Image Size..................................................................... 33 Adjusting the Image Angle.................................................................. 34 Correcting Keystone Distortion .......................................................... 35 Adjusting the Image Quality .............................................37 Focusing the Screen Image.................................................................. 37 Adjusting Computer Images............................................................... 37 Automatic Setup................................................................................................ 37 Adjusting the Tracking...................................................................................... 38 Adjusting the Sync ............................................................................................ 39 Selecting the Colour Mode .................................................................. 40
28 Turning On the Projector Turn on the power to start projecting images. Caution : Be sure to read the separate Safety Instructions/World-Wide Warranty Terms before projecting images. Connecting the Power Cable Procedure 1Check that the power is turned off for the projector and all components connected to the projector. 2Connect the computer or other video source to the projector. (p.17, 21) 3Remove the lens cover. 4Connect the accessory power cable to the projector. Check that the power cable connector is facing the same way as the power inlet on the projector, and then insert the power cable connector securely into the projector. 5Connect the other end of the power cable to an earthed electrical outlet. Wait until the Power indicator lights orange. Tip : The projectors control panel and remote control buttons cannot be operated while the Power indicator is flashing orange. Power Lit orange