Epson Projector Emp 52 User Manual
Here you can view all the pages of manual Epson Projector Emp 52 User Manual. The Epson manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 41
![Page 41
39
If flickering, fuzziness or interference appear
in images that are input from the computer,
and this cannot be fixed using automatic setup,
you will need to adjust the sync
manually
using the following procedure.
Procedure
1Press the [Menu] button on the
remote control, and then select
Sync. from the Video
menu.
For details on this operation, refer to
Using the Configuration Menus.
(p.56)
2Press the [ ] and [ ] buttons
to set the sync value.
The sync value increases or
decreases each time...](http://img.usermanuals.tech/thumb/23/89771/w300_epson-emp-52-manual_d-40.png "Page 41
39
If flickering, fuzziness or interference appear
in images that are input from the computer,
and this cannot be fixed using automatic setup,
you will need to adjust the sync
manually
using the following procedure.
Procedure
1Press the [Menu] button on the
remote control, and then select
Sync. from the Video
menu.
For details on this operation, refer to
Using the Configuration Menus.
(p.56)
2Press the [ ] and [ ] buttons
to set the sync value.
The sync value increases or
decreases each time...")
39 If flickering, fuzziness or interference appear in images that are input from the computer, and this cannot be fixed using automatic setup, you will need to adjust the sync manually using the following procedure. Procedure 1Press the [Menu] button on the remote control, and then select Sync. from the Video menu. For details on this operation, refer to Using the Configuration Menus. (p.56) 2Press the [ ] and [ ] buttons to set the sync value. The sync value increases or decreases each time...
Page 42
![Page 42
40
Selecting the Colour Mode
The following six preset colour modes are available for use depending on the
characteristics of the images that are being projected. You can easily obtain the
optimum image quality simply by selecting the colour mode that corresponds to
the projected images. The brightness of the images will vary depending on
which colour mode is selected.
Procedure
The colour mode changes as follows
each time the [Color Mode] button on
the remote control is pressed.
Normal → Meeting →...](http://img.usermanuals.tech/thumb/23/89771/w300_epson-emp-52-manual_d-41.png "Page 42
40
Selecting the Colour Mode
The following six preset colour modes are available for use depending on the
characteristics of the images that are being projected. You can easily obtain the
optimum image quality simply by selecting the colour mode that corresponds to
the projected images. The brightness of the images will vary depending on
which colour mode is selected.
Procedure
The colour mode changes as follows
each time the [Color Mode] button on
the remote control is pressed.
Normal → Meeting →...")
40 Selecting the Colour Mode The following six preset colour modes are available for use depending on the characteristics of the images that are being projected. You can easily obtain the optimum image quality simply by selecting the colour mode that corresponds to the projected images. The brightness of the images will vary depending on which colour mode is selected. Procedure The colour mode changes as follows each time the [Color Mode] button on the remote control is pressed. Normal → Meeting →...
Page 43
41 Advanced Operations This chapter describes functions for enhancing the projection of images, and how to use the configuration menus. Functions for Enhancing Projection ................................42 A/V Mute .............................................................................................. 42 Freeze .................................................................................................... 43 Wide-screen Projection of Component Video and Video Images (Changing the...
Page 44
42 Functions for Enhancing Projection This section describes the various useful functions that can be used to enhance presentations. A/V Mute This function momentarily pauses the image and sound. For example, it can be used when you do not want to show viewers details of operations such as selecting different files while computer images are being projected. However, if you use this function when projecting moving images, the images and sound will still continue to be played back by the source, and...
Page 45
![Page 45
43
Freeze
This function pauses only the projected images. The sound keeps playing
without pausing.
The image source will still be playing back the images even while projection is
paused, and so it will not be possible to resume projection from the point where
it was paused.
Procedure
Press the [Freeze] button on the
remote control.
The images will then be paused.
To continue projecting the images, either press
the [Freeze] button again or press the [ESC]
button.
Tip :
Pressing the [Freeze] button...](http://img.usermanuals.tech/thumb/23/89771/w300_epson-emp-52-manual_d-44.png "Page 45
43
Freeze
This function pauses only the projected images. The sound keeps playing
without pausing.
The image source will still be playing back the images even while projection is
paused, and so it will not be possible to resume projection from the point where
it was paused.
Procedure
Press the [Freeze] button on the
remote control.
The images will then be paused.
To continue projecting the images, either press
the [Freeze] button again or press the [ESC]
button.
Tip :
Pressing the [Freeze] button...")
43 Freeze This function pauses only the projected images. The sound keeps playing without pausing. The image source will still be playing back the images even while projection is paused, and so it will not be possible to resume projection from the point where it was paused. Procedure Press the [Freeze] button on the remote control. The images will then be paused. To continue projecting the images, either press the [Freeze] button again or press the [ESC] button. Tip : Pressing the [Freeze] button...
Page 46
![Page 46
44
Wide-screen Projection of Component Video and Video
Images (Changing the Aspect Ratio)
This function changes the aspect ratio of images from 4:3 to 16:9 when
component video images (YCbCr and YPbPr) or video images (S-Video or
composite video) are being projected. Images which have been recorded in
digital video or onto DVDs can be viewed in 16:9 wide-screen format.
Procedure
1Press the [Menu] button on the
remote control, and then select
Aspect Ratio from the
Video menu.
For details on this...](http://img.usermanuals.tech/thumb/23/89771/w300_epson-emp-52-manual_d-45.png "Page 46
44
Wide-screen Projection of Component Video and Video
Images (Changing the Aspect Ratio)
This function changes the aspect ratio of images from 4:3 to 16:9 when
component video images (YCbCr and YPbPr) or video images (S-Video or
composite video) are being projected. Images which have been recorded in
digital video or onto DVDs can be viewed in 16:9 wide-screen format.
Procedure
1Press the [Menu] button on the
remote control, and then select
Aspect Ratio from the
Video menu.
For details on this...")
44 Wide-screen Projection of Component Video and Video Images (Changing the Aspect Ratio) This function changes the aspect ratio of images from 4:3 to 16:9 when component video images (YCbCr and YPbPr) or video images (S-Video or composite video) are being projected. Images which have been recorded in digital video or onto DVDs can be viewed in 16:9 wide-screen format. Procedure 1Press the [Menu] button on the remote control, and then select Aspect Ratio from the Video menu. For details on this...
Page 47
![Page 47
45
E-Zoom
This function lets you enlarge and reduce a part of projected images such as
graphs and tables.
Procedure
1Press the [E-Zoom ] button on the
remote control.
A cursor (cross) indicating the centre
point for the area to be enlarged will
appear on the screen.
2Move the cross to the area of the
image that is to be enlarged or
reduced.
Press the [ ], [ ], [ ] and [ ] buttons
on the remote control to move the cross.
3When [ ] is pressed, the image is
enlarged with the cross as its centre....](http://img.usermanuals.tech/thumb/23/89771/w300_epson-emp-52-manual_d-46.png "Page 47
45
E-Zoom
This function lets you enlarge and reduce a part of projected images such as
graphs and tables.
Procedure
1Press the [E-Zoom ] button on the
remote control.
A cursor (cross) indicating the centre
point for the area to be enlarged will
appear on the screen.
2Move the cross to the area of the
image that is to be enlarged or
reduced.
Press the [ ], [ ], [ ] and [ ] buttons
on the remote control to move the cross.
3When [ ] is pressed, the image is
enlarged with the cross as its centre....")
45 E-Zoom This function lets you enlarge and reduce a part of projected images such as graphs and tables. Procedure 1Press the [E-Zoom ] button on the remote control. A cursor (cross) indicating the centre point for the area to be enlarged will appear on the screen. 2Move the cross to the area of the image that is to be enlarged or reduced. Press the [ ], [ ], [ ] and [ ] buttons on the remote control to move the cross. 3When [ ] is pressed, the image is enlarged with the cross as its centre....
Page 48
46 Using the Configuration Menu Functions The configuration menus can be used to carry out a variety of settings and adjustments. The menus have a hierarchical structure, with a main menu that is divided into sub-menus, which are further divided into other sub-menus. The remote control is used to operate the menus. Refer to Using the Configuration Menus (p.56) for details on using the menus. List of Functions The functions in the Video menu apart from Input Signal, Auto Setup and Video Signal...
Page 49
![Page 49
47
Video Menu
Sub-menuFunctionDefault
Position Moves the image display position vertically and
horizontally.
Press the [Enter] button and make the adjustment using
the display position adjustment sub-menu that appears.Depends on
connection
Tracking
Adjusts computer images when vertical stripes appear in
the images.Depends on
connection
Sync.
Adjusts computer images when flickering, fuzziness or
interference appear in the images.
Flickering and fuzziness may also appear when the
brightness,...](http://img.usermanuals.tech/thumb/23/89771/w300_epson-emp-52-manual_d-48.png "Page 49
47
Video Menu
Sub-menuFunctionDefault
Position Moves the image display position vertically and
horizontally.
Press the [Enter] button and make the adjustment using
the display position adjustment sub-menu that appears.Depends on
connection
Tracking
Adjusts computer images when vertical stripes appear in
the images.Depends on
connection
Sync.
Adjusts computer images when flickering, fuzziness or
interference appear in the images.
Flickering and fuzziness may also appear when the
brightness,...")
47 Video Menu Sub-menuFunctionDefault Position Moves the image display position vertically and horizontally. Press the [Enter] button and make the adjustment using the display position adjustment sub-menu that appears.Depends on connection Tracking Adjusts computer images when vertical stripes appear in the images.Depends on connection Sync. Adjusts computer images when flickering, fuzziness or interference appear in the images. Flickering and fuzziness may also appear when the brightness,...
Page 50
![Page 50
48 * If set to sRGB, the colour temperature for the Color Adjustment command in the
Advanced menu will be set to 6500K.
Component (YCbCr, YPbPr) Video (S-Video, Composite video)
Video Menu
Reset Resets all adjustment values for the Video menu
functions except for the Input Signal setting to their
default settings.
Press the [Enter] button to display the confirmation
screen, and select Yes.
Select Reset All to return all menu settings to their
default settings. (p.55)-
Sub-menuFunctionDefault...](http://img.usermanuals.tech/thumb/23/89771/w300_epson-emp-52-manual_d-49.png "Page 50
48 * If set to sRGB, the colour temperature for the Color Adjustment command in the
Advanced menu will be set to 6500K.
Component (YCbCr, YPbPr) Video (S-Video, Composite video)
Video Menu
Reset Resets all adjustment values for the Video menu
functions except for the Input Signal setting to their
default settings.
Press the [Enter] button to display the confirmation
screen, and select Yes.
Select Reset All to return all menu settings to their
default settings. (p.55)-
Sub-menuFunctionDefault...")
48 * If set to sRGB, the colour temperature for the Color Adjustment command in the Advanced menu will be set to 6500K. Component (YCbCr, YPbPr) Video (S-Video, Composite video) Video Menu Reset Resets all adjustment values for the Video menu functions except for the Input Signal setting to their default settings. Press the [Enter] button to display the confirmation screen, and select Yes. Select Reset All to return all menu settings to their default settings. (p.55)- Sub-menuFunctionDefault...