Epson Projector Emp 51 User Manual

39
Freezing and Deleting Images
Freezing a Moving Image (Remote Control Only)
You can freeze a moving image (video or other image).
1.Press the Freeze button on the remote 
control.
(To release the freeze, press the Freeze 
button again.)
Muting Images and Sound (Remote Control Only)
You can temporarily mute images and sound and project a black or blue image.
1.Press the A/V Mute button on the remote 
control.
(To cancel the muting feature, press the A/V 
Mute button or another button.)
Tip:
Using the...

40
Displaying Help Screens
You can display topic-specific help on screen for solving problems.  Use this 
function when problems occur.
1.Press the Help button to start the help 
function.
(Press the Help button again to cancel this 
function.)
Tip:
If you cannot solve your problem using the Help 
function, consult the Troubleshooting section 
in this manual (See page 53).
2.Tilt the Select button on the projector up or 
down to select a topic (on the remote 
control, tilt the Enter button up or down)....

41
Learning Basic Operations ..................................... 42
Video Menu ............................................................ 43
Audio Menu ............................................................ 45
Effect Menu ............................................................ 46
Setting Menu........................................................... 47
Advanced Menu ...................................................... 49
About Menu...

42
Learning Basic Operations
This section presents the basic functions available in menus. The menu can be 
controlled by the remote control.
For functions in each menu, access the guide available under each menu.
[Guide for explanation of symbols]
[Opening and Closing Menus]
Press the Menu button to display the top menu.
To close this menu, press the Menu button again.
To close this menu, press the Menu button. All the settings will be saved 
when the menu is closed.
[Menu Selection]
Tilt the Enter...

43
Video Menu
Displaying Menus
Press the Menu button, use the Enter button to select Video from the top 
menu displayed, and press the Enter button to move to a submenu.
Tip:
 When there is no video signal from a Computer / Component Video device, the 
Video menu is not available for settings.
 When there is no video signal from a Video device, only the Mode menu is available 
for settings.
Settings
Video menu elements to be set differ as follows when projecting computer/
component video versus video...

44
D-Sub15: Computer/Component video  Video: Video image
: setting available   : setting not available
MenuContentVideo Projection
D-Sub15Video
Brightness Adjusts image brightness.
+: Brightens image.
- : Darkens image.
Contrast
* Adjusts difference in color brightness/darkness.
+: Increases difference in color brightness/
darkness.
- : Decreases difference in color brightness/
darkness.
Color Adjusts color depth.
+: Deepens color.
- : Lightens color.
Tint Adjusts tint.
+: Strengthens red.
- :...

45
Audio Menu
Displaying Menus
Press the Menu button, use the Enter button to select Audio from the top 
menu displayed, and press the Enter button to move to a submenu.
Settings
MenuContent
Volume Adjusts the volume of sound output from the projector.
+: Increases volume.
- : Decreases volume.
Tone Adjusts the tone of sound output from the projector.
+: Increases treble.
- : Decreases treble.
Audio Input Select an audio input destination.
(When the input signal is a component video signal, select...

46
Effect Menu
Displaying Menus
Press the Menu button, use the Enter button to select Effect from the top 
menu displayed, and press the Enter button to move to a submenu.
Settings
MenuContent
Cursor/Stamp Make detailed settings for the cursor/stamp function assigned to the 
remote control Effect1 button.
Shape : Select the shape of the cursor/stamp.
Zoom Rate : Select the display zoom factor for the cursor/stamp.
Horizontal Bar Make detailed settings for the horizontal bar function assigned to the...

47
Setting Menu
Displaying Menus
Press the Menu button, use the Enter button to select Setting from the top 
menu displayed, and press the Enter button to move to a submenu.
Settings
MenuContent
Keystone If the screen is distorted in trapezoidal form, adjust it to normal display.
*You can also adjust the screen with the Keystone button on the 
projector.
A keystone correction reduces screen size.
The keystone correction is stored in memory.  You will need to 
readjust the image if the projection angle...

48
A/V Mute* Temporarily eliminates video during a presentation.
When the A/V button is pressed again, the video display will continue.
Black : A black screen is displayed.
Blue : A blue screen is displayed.
Sleep Mode After sleep mode is activated, the projector enters standby mode when 
no signal is input from an external source for a continuous period of 30 
minutes.
ON : Sleep Mode active
OFF : Sleep Mode inactive
Reset Returns Setting menu settings to their factory shipping values.
* See page 52 for...