Epson Projector Emp 503 User Manual

Changing a Menu Setting
          
45
Changing a Menu Setting
To change a menu setting: 
1. Press the Menu button on the remote control to display 
the Main menu. 
2. Press the top or bottom of the Enter button to scroll 
through the menu choices.
3. Press the Enter button to display a submenu. 
Power
Freeze
A/V MuteE-ZoomR/C ON
OFF3
1524
Enter
Esc
Enter button
Power
Freeze
A/V MuteE-ZoomR/C ON
OFF3
1524
Enter
Esc
Enter button
Power
Freeze
A/V MuteE-ZoomR/C ON
OFF3
1524
Enter
Esc 

        
46
As you select a menu, a sub menu of options appears to the 
right.
♦Note: The options available in some submenus vary, depending 
on whether the current image source is the computer or a video 
source.
4. Press the top or bottom of the Enter button to scroll 
through the menu choices.
5. Press the right or left sides of the Enter button to change a 
setting on one of the submenus.
6. When you are finished changing settings, press the Menu 
button again to hide the menu, or press the Esc...

Menu Options
          
47
Menu Options
Video Menu (Image source = Computer)
The Video menu lets you make adjustments to the projected 
image. The following options are available when the image 
source is Computer.
♦Note: The computer must be connected and operating, and the 
image source on the projector must be set to Computer for you to 
access these menu options.
Menu item Description
Position Select this item by pressing the Enter button to enter 
the screen position adjustment mode. Then use...

        
48Color Adjusts the color balance (Red:Green:Blue) of the 
input source.
Select this item by pressing the Enter button. The 
projector will enter color adjustment mode. Use the 
Enter button to select a color.
Next, use the Enter button to adjust the selected color. 
Increase the color setting for more intense color, or 
decrease the setting for less intense color.
Sharpness Adjusts the screen sharpness. 
Increase the sharpness for a sharper image, or 
decrease it for a less sharp image....

Menu Options
          
49
Video Menu (Image source = Video)  
The Video menu lets you make adjustments to the projected 
image. The following options are available when the image 
source is Video.
♦Note: The projector’s image source must be set to Video, and the 
video source (such as a VCR or camcorder) must be connected 
and operating for you to access these menu options (for example, 
the projector must actually be projecting an image from a video 
tape, if you’re using a VCR).
Menu item...

        
50
Audio Menu 
The Audio menu lets you make adjustments related to audio. 
Mode Specifies the image signal mode. User can select from 
Auto, NTSC, NTSC4.43, PAL, M-PAL, N-PAL, PAL 60, 
SECAM.
Reset Returns all menu items to their initial factory defaults.
Select this item and then press the Enter button to 
display the confirmation screen.
Next, select Yes and then press the Enter button to 
reset the menu.
If you change your mind, select No and then press the 
Enter button to clear the...

Menu Options
          
51
Effect Menu
Use the Effect menu to modify what happens when you use 
the Effects buttons on the remote control and to change the 
cursor speed
.
Setting Menu
The Setting menu lets you adjust or set the various projector 
options.
Menu item Description
Cursor/Stamp Selects the stamp icon you want to use as the cursor 
graphic and a zoom rate.
Box Selects the box color and shape.
Marker Selects the marker color and width.
Freehand Selects the color and width.
Cursor Speed...

        
52
Users Logo Menu
The User’s Logo menu lets you display a custom logo on the 
screen.
Creating a user logo requires two steps:
•Storing a user logo
•Assigning the logo to the A/V Mute button
No-Signal Msg Specifies whether a black screen, a blue screen, or a 
user logo displays when the screen is blanked.
Prompt Temporarily displays a message on the projector 
screen to identify which source (computer or video) is 
providing the image.
A/V Mute Turns off/on the audio/video output of the...

Menu Options
          
53
Storing a User Logo
Follow these steps to capture and store a logo.
1. Display the image(with the projector) you wish to use as a 
logo.
2. Press the Menu button to open the Menu window.
3. Select the User’s Logo menu option by pressing the 
pointer button. Then press the Enter button to display the 
User’s Logo Setting window.
4. The message, “Do you use the present image as a user 
logo?” appears on the screen. Choose Yes or No by 
pressing left or right of the Enter...

        
54
Assigning the Logo to the A/V Mute Button
Follow these steps to assign the logo to the A/V Mute 
button:
1. Press the Menu button to open the Menu window.
2. Select the Setting menu and press the Enter button.
3. Select the Blank option (A/V Mute), then highlight User 
Logo.
4. Press the Menu button twice.
Now you can press the A/V Mute button on the remote 
control to display the user logo.
Reset All Menu
Selecting the Reset All menu option resets the settings in all 
menus to their...