Epson Projector Emp 503 User Manual

 
Connecting to a Computer 
          

 
15  3. Connect the small terminal of the Macintosh desktop 
adapter to the other end of the computer cable.
4. Connect the computer cable (with the Macintosh desktop 
adapter attached) to the video-out port on your 
Macintosh.  Connecting the Mouse Cables  If you want to use the remote control as a mouse, you need to 
connect the USB mouse cable.
  ♦
  Note:
   The USB mouse port on the projector can only be used by 
connecting a USB mouse. It is not...

 
         
16  1. Connect one end of the projector’s USB mouse cable to 
the USB Mouse port on the projector
2. Disconnect your Macintosh’s mouse cable. Connect the 
other end of the projector’s USB mouse cable to the 
mouse port on your Macintosh.  Connecting the Audio Cable  1. If you will be using audio, connect one end of the audio 
cable to the Audio In jack on the projector.   
2. Connect the other end of the audio cable to the Audio 
Out port on your computer.  
Audio In jack
audio cable 

 
Connecting to a Computer 
          

 
17  Connecting to a PowerBook   Your PowerBook must have video-out capability in order to 
connect to the projector. 
To connect the projector to your PowerBook, you need to:
•Connect the computer cable
•Connect the mouse cable (if you want to use the remote 
control as a mouse)
•Connect the audio cable (if you’ll be projecting with audio)
Follow the steps in each section for the cables you need to 
connect. Before beginning, turn off the projector and...

 
         
18  ♦
  Note: 
  Some new PowerBooks may allow you to connect the 
computer cable directly to the computer without using a 
video-out cable. See your PowerBook manual for additional 
information on connecting a computer cable.
  1. Connect one end of the computer cable to the projector’s 
Computer port.
2. Remove the small cover on the Macintosh desktop adapter 
and set its DIP switches in accordance with the resolution 
you want to use (such as 16-inch mode). See your 
Macintosh...

 
Connecting to a Computer 
          

 
19  3. Connect the small terminal of the Macintosh desktop 
adapter to the other end of the computer cable.
4. Connect the computer cable (with the optional Macintosh 
desktop adapter) to the video-out port on the PowerBook. 
If a video-out cable was provided with your PowerBook, 
connect the smaller end of the video-out cable to the video-
out port on the back of the PowerBook. Connect the other 
end to the Macintosh desktop adapter on the end of the...

 
         
20
Connecting the Mouse Cables
If you want to use the remote control as a mouse, you need to 
connect the USB mouse cable.
♦Note: The USB mouse port on the projector can only be used by 
connecting a USB mouse. It is not possible to connect other USB 
equipment for use.
Refer to this illustration while following the steps below. 
1. Connect one end of the projector’s USB mouse cable to 
the USB Mouse port on the projector.
USB mouse cable 

Connecting to a Computer
          
21
2. Connect the other end of the USB mouse cable to the 
mouse port on the back of the PowerBook.
Connecting the Audio Cable
1. If you will be using audio, connect one end of the audio 
cable to the Audio In jack on the projector. 
2. Connect the other end of the audio cable to the audio-out 
port on your PowerBook. 
♦Note: After you turn on the projector and computer, you’ll need 
to choose Mirroring in the Display Control Panel if you set up 
your...

        
22
Connecting to a Video Source
You can connect a VCR, a camcorder, a laser disc player, 
DVD player, or any other compatible video image source to 
your projector.
The projector can receive composite video or S-Video. Your 
equipment has composite video if your video source has a 
one-pin RCA video jack. Your equipment has S-Video if your 
video source has a four-pin (mini-DIN) video jack.
♦Note: The projector is not compatible with a cable TV-style F 
connector.
You can connect the...

Connecting to a Video Source
          
23
2. If your video source uses a small, round, one-prong 
composite (RCA) video connector, you’ll need the RCA 
video cable that comes with the projector. If your video 
source uses a large, round, four-prong S-Video connector, 
you will need to purchase the appropriate cable or use the 
cable that came with your video source.
3. For Composite Video, connect the yellow RCA plug on 
one end of the RCA video cable to the projector’s Video 
jack. Connect the...

        
24
6. Connect the RCA audio cable to the Audio jacks of the 
projector: insert the white plug into the L jack and the red 
plug into the R jack. Connect the plug at the other end of 
the RCA audio cable to the audio output jack of the video 
source.
S-Video connector
S-Video cable