Epson Projector Emp 503 User Manual

 
Getting the Most Out of Your Projector 
          

 
ix 
Getting the Most Out of Your Projector 
Your projector comes with a full set of features that enable 
you to control the settings for the image display, video and 
audio. To get the most out of your projector, read this section 
for a quick summary of the important features. 
Optional Accessories 
To enhance your use of the projector, EPSON provides the 
following optional accessories:
•Image Presentation Camera ELPDC01
•Image Presentation...

 
Introduction 
         
x 
About This Manual 
Chapter 1, “Installation”, gives step-by-step instructions on 
how to set up the projector and connect it to your computer, 
video source, or other external speaker or PA system. Read 
the installation procedures that apply to your configuration.
Chapter 2, “Using the Projector”, describes how to switch 
the projector on/off and control simple projector settings 
using the remote control or the operation panel.
Chapter 3, “Using the Menus”, describes...

 
Safety Instructions 
          

 
xi 
Safety Instructions 
Follow these safety instructions when setting up and using the 
projector:
1. Do not place the projector on an unstable cart, stand, or 
table.
2. Do not use the projector near water or sources of heat.
3. Use attachments only as recommended.
4. Use the type of power source indicated on the projector. 
If you are not sure of the power available, consult your 
dealer or local electricity company.
5. Place the projector near a wall outlet...

 
Introduction 
         
xii 
11. Do not block the slots and openings in the projector case. 
They provide ventilation and prevent the projector from 
overheating. Do not place the projector on a sofa, rug or 
other soft surface, or in a closed-in cabinet unless proper 
ventilation is provided.
12. Never push objects of any kind through cabinet slots. 
Never spill liquid of any kind into the projector.
13. Except as specifically explained in this User’s Guide, do 
not attempt to service this product...

 
Where to Get Help
          
xiii
Where to Get Help
If you are having trouble setting up or running your 
projector, first see Chapter 5, “Troubleshooting”. If you 
cannot resolve the problem, contact the appropriate 
representative listed in the section entitled “World -Wide 
Warranty Terms” at the end of this manual.
Before you call, please have the following information ready:
•Product name
•Product serial number
•Computer configuration
•Description of the problem
World Wide Web site
If you...

Introduction
        
xiv
Transporting your projector
The projector contains many glass parts and precision parts. If 
you need to transport it, please follow these packing 
guidelines to prevent damaging the projector:
•When shipping the projector for repairs, use the original 
packaging material. 
If you don’t have the original packaging, use equivalent 
materials, placing plenty of cushioning around the 
projector.
•When transporting the projector for business use, first put 
the projector in a...

                                                                           
          
1
1
Installation
This chapter describes how to unpack and set up your 
projector, and connect it to other equipment. The projector 
must be connected to a computer or a video source such as a 
video tape deck, camcorder, digital camera or laser disc player 
before it can project any images.
You may also want to set up the projector for one or more of 
the following:
•Connect the mouse cable to use...

        
2
Unpacking the Projector
When you unpack the projector, make sure you have all these 
components:
•Projector
•Remote control
•2 AA batteries
•Power cord
•Computer cable
•Audio/Video cable (A/V cable)
•PS/2 mouse cable
•USB mouse cable
•Owner’s manual
•Softcase
Depending on the configuration of your equipment, you may 
not need all these components.
Save all packaging materials in case you need to ship the 
projector in the future. It should be transported in its original 
packaging or the...

Unpacking the Projector
          
3
Additional Components
Depending on how you plan to use the projector, you may 
need these additional components:
•To receive an S-Video signal, you need an S-Video cable. 
(One is usually provided with your video device.) A 
separate cable is required for each video source.
•To connect the projector to a Macintosh PowerBook, you 
need a video-out cable. 
(One is provided by/or can be purchased from Apple for all 
new PowerBooks that have video-out capability.)...

        
4
Setting Up the Projector
1. Place the projector on a sturdy, level surface within five 
feet of the computer or video source.
♦Caution: Do not hold the projector by the lens. This can damage 
the lens.
2. Place the projector at a correct distance from the screen.
The distance between the projector and the screen 
determines the actual image size. Use the general 
guidelines below to determine the correct distance.
3. Turn the projector so that the lens is at right angles to the 
screen. If...