Epson Projector Emp 500 User Manual
Here you can view all the pages of manual Epson Projector Emp 500 User Manual. The Epson manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 31
Connecting to a Computer
13
Connecting to a Desktop Macintosh
To connect the projector to your desktop Macintosh, you
need to:
•Connect the computer cable
•Connect the mouse cable (if you want to use the remote
control as a mouse)
•Connect the audio cable (if you’ll be projecting with audio)
Follow the steps in each section for the cables you need to
connect. Before beginning, turn off the projector and
computer if they are on.
♦
Note:
Macintosh configurations vary....
Page 32
14
1. Connect one end of the computer cable to the projector’s
Computer port.
2. Remove the small cover on the Macintosh desktop adapter
and set its DIP switches in accordance with the resolution
you want to use (such as 16-inch mode). See your
Macintosh documentation for instructions.
Page 33
Connecting to a Computer
15
3. Connect the small terminal of the Macintosh desktop
adapter to the other end of the computer cable.
4. Connect the computer cable (with the Macintosh desktop
adapter attached) to the video-out port on your
Macintosh.
Connecting the Mouse Cables
If you want to use the remote control as a mouse, you need to
connect the Mac mouse cable or USB mouse cable.
Refer to this illustration while following the steps below.
Mouse/Com portUSB mouse...
Page 34
16
1. Connect one end of the projector’s Mac mouse cable or
USB mouse cable to the Mouse/Com or USB Mouse port
on the projector
2. Disconnect your Macintosh’s mouse cable. Connect the
other end of the projector’s Mac mouse cable or USB
mouse cable to the mouse port on your Macintosh.
Connecting the Audio Cable
1. If you will be using audio, connect one end of the audio
cable to the Audio In jack on the projector.
2. Connect the other end of the audio cable to the...
Page 35
Connecting to a Computer
17
Connecting to a PowerBook
Your PowerBook must have video-out capability in order to
connect to the projector.
To connect the projector to your PowerBook, you need to:
•Connect the computer cable
•Connect the mouse cable (if you want to use the remote
control as a mouse)
•Connect the audio cable (if you’ll be projecting with audio)
Follow the steps in each section for the cables you need to
connect. Before beginning, turn off the projector and...
Page 36
18
♦
Note:
Some new PowerBooks may allow you to connect the
computer cable directly to the computer without using a
video-out cable. See your PowerBook manual for additional
information on connecting a computer cable.
1. Connect one end of the computer cable to the projector’s
Computer port.
2. Remove the small cover on the Macintosh desktop adapter
and set its DIP switches in accordance with the resolution
you want to use (such as 16-inch mode). See your
Macintosh...
Page 37
Connecting to a Computer
19
3. Connect the small terminal of the Macintosh desktop
adapter to the other end of the computer cable.
4. Connect the computer cable (with the optional Macintosh
desktop adapter) to the video-out port on the PowerBook.
If a video-out cable was provided with your PowerBook,
connect the smaller end of the video-out cable to the video-
out port on the back of the PowerBook. Connect the other
end to the Macintosh desktop adapter on the end of the...
Page 38
20
Connecting the Mouse Cables
If you want to use the remote control as a mouse, you need to
connect the Mac mouse cable or USB mouse cable.
Refer to this illustration while following the steps below.
1. Connect one end of the projector’s Mac mouse cable or
USB mouse cable to the Mouse/Com or USB Mouse port
on the projector.
Mac mouse cable Mouse/Com port
USB mouse cable
Page 39
Connecting to a Computer
21
2. Connect the other end of the Mac mouse cable or USB
mouse cable to the mouse port on the back of the
PowerBook.
Connecting the Audio Cable
1. If you will be using audio, connect one end of the audio
cable to the Audio In jack on the projector.
2. Connect the other end of the audio cable to the audio-out
port on your PowerBook.
♦
Note:
After you turn on the projector and computer, you’ll need
to choose Mirroring in the Display Control...
Page 40
22
Connecting to a Video Source
You can connect a VCR, a camcorder, a laser disc player,
DVD player, or any other compatible video image source to
your projector.
The projector can receive composite video or S-Video. Your
equipment has composite video if your video source has a
one-pin RCA video jack. Your equipment has S-Video if your
video source has a four-pin (mini-DIN) video jack.
♦
Note:
The projector is not compatible with a cable TV-style F
connector.
You...