Epson Projector Emp 500 User Manual

 
  
  

 
    
   
 
        
  
 
      
 
   
    
 
     
 
      
 
      
    
  

 
    
  
 
      

 
      
 
       

 
       
 
       

 
               
vii 
Introduction 
Y 
our compact, lightweight EPSON EMP-710/700/500 
projector lets you project full-color images and video onto a 
large screen for presentations. You can connect it 
simultaneously to two image sources: one PC or Apple® 
Macintosh® computer image source, plus one video source 
such as a video tape...

 
Introduction 
               
viii 
Your projector features the newest resizing technology DAR 
(Digital Active Resizing) which supports VGA~UXGA (EMP-
710/700) and VGA~SXGA (EMP-500) computer output. 
No matter what type of computer output is used, the result is 
a full-size video image of outstanding clarity.
The video source can be NTSC, PAL or SECAM in composite 
video or S-Video format. See Chapter 6 for details on 
supported computers and video formats. 

 
Getting the Most Out of Your Projector 
               
ix 
Getting the Most Out of Your Projector 
Your projector comes with a full set of features that enable 
you to control the settings for the image display, video and 
audio. To get the most out of your projector, read this section 
for a quick summary of the important features. 
Optional Accessories 
To enhance your use of the projector, EPSON provides the 
following optional accessories:
•Spare Lamp (EMP-710) ELPLP10S
•Spare Lamp...

 
Introduction 
               
x 
About This Manual 
Chapter 1, “Installation”, gives step-by-step instructions on 
how to set up the projector and connect it to your computer, 
video source, or other external speaker or PA system. Read 
the installation procedures that apply to your configuration.
Chapter 2, “Using the Projector”, describes how to switch 
the projector on/off and control simple projector settings 
using the remote control or the operation panel.
Chapter 3, “Using the Menus”,...

 
Safety Instructions 
               
xi 
Safety Instructions 
Follow these safety instructions when setting up and using the 
projector:
1. Do not place the projector on an unstable cart, stand, or 
table.
2. Do not use the projector near water or sources of heat.
3. Use attachments only as recommended.
4. Use the type of power source indicated on the projector. 
If you are not sure of the power available, consult your 
dealer or local electricity company.
5. Place the projector near a wall...

 
Introduction 
               
xii 
11. Do not block the slots and openings in the projector case. 
They provide ventilation and prevent the projector from 
overheating. Do not place the projector on a sofa, rug or 
other soft surface, or in a closed-in cabinet unless proper 
ventilation is provided.
12. Never push objects of any kind through cabinet slots. 
Never spill liquid of any kind into the projector.
13. Except as specifically explained in this User’s Guide, do 
not attempt to service...

 
Where to Get Help 
               
xiii 
Where to Get Help 
If you are having trouble setting up or running your 
projector, first see Chapter 5, “Troubleshooting”. If you 
cannot resolve the problem, contact the appropriate 
representative listed in the section entitled “World -Wide 
Warranty Terms” at the end of this manual.
Before you call, please have the following information ready:
•Product name
•Product serial number
•Computer configuration
•Description of the problem 
World Wide Web...

 
Introduction 
               
xiv 
Transporting your projector 
The projector contains many glass parts and precision parts. If 
you need to transport it, please follow these packing 
guidelines to prevent damaging the projector:
•When shipping the projector for repairs, use the original 
packaging material. 
If you don’t have the original packaging, use equivalent 
materials, placing plenty of cushioning around the 
projector.
•When transporting the projector for business use, first put 
the...

 
  
  

 
    
   
 
        
  
 
      
 
   
    
 
     
 
      
 
      
    
  

 
    
  
 
      

 
      
 
       

 
       
 
       

 
               
1 
1 
Installation 
T 
his chapter describes how to unpack and set up your 
projector, and connect it to other equipment. The projector 
must be connected to a computer or a video source such as a 
video tape deck, camcorder, digital camera or laser disc player 
before it can project any images.
You may also want to...

 
               
2 
Unpacking the Projector 
When you unpack the projector, make sure you have all these 
components:
•Projector
•Remote control
•2 AA batteries
•Power cord
•Computer cable
•Audio/Video cable (A/V cable)
•PS/2 mouse cable
•USB mouse cable
•Mac mouse cable (ADB mouse cable)
•Owner’s manual
•Softcase
Depending on the configuration of your equipment, you may 
not need all these components.
Save all packaging materials in case you need to ship the 
projector in the future. It should...