Epson Projector Emp 30 User Manual

1
Settings and Useful 
Functions
This chapter describes the configuration menus and useful 
functions that can be used when a computer is connected.
Using the Configuration Menu Functions...... 20
•
•• •Video Menu .................................................................... 20
 Video ..................................................................................................20
 Computer/RGB video ........................................................................22
•
•• •Audio Menu...

20
Using the Configuration Menu Functions
The configuration menus can be used to carry out a variety of settings and adjustments.
The menus have a hierarchical structure, with a main menu that is divided into sub-menus, which are further divided into 
other sub-menus.
The remote control is used to operate the menus. Refer to Using the Configuration Menus (p.27) for details on using the 
menus.
•
•• •The functions in the Video menu apart from Cinema Filter, Input Signal, Auto Setup and Video 
Signal...

Settings and Useful Functions
21
* If set to sRGB, the colour temperature for the Color Adjustment command in the Advanced menu will be set 
to 6500K. Tint (Not available for RGB video)
(Adjustment is only possible when component video
 or NTSC signals are 
being input.) 
Adjust the image tint.Median 
value (0)
Sharpness Adjusts the image sharpness. Median 
value (0)
Color Mode Corrects the vividness of the image colour. The settings can be saved separately 
for each type of source (video source or...

Using the Configuration Menu Functions
22
Video Menu
* If set to sRGB, the colour temperature for the Color Adjustment command in the Advanced menu will be set 
to 6500K.
Computer (Analogue-RGB)/RGB video
Sub-menuFunctionDefault 
Cinema Filter This turns the function for automatically adjusting signals to the optimum tint 
for movie images on and off. 
When set to ON, the proper effect will not be obtained unless the accessory 
cinema filter is attached to the lens of the projector. (p.14)OFF
Position...

Settings and Useful Functions
23
Audio Menu
Sub-menuFunctionDefault
Volume Adjusts the volume. Median 
value (10)
Tone Adjusts the tone. Median 
value (0)
Audio Input Selects the input source for audio signals. 
The default setting varies depending on the type of signal being input (for 
component video,  RGB video and computer input signals: Computer; for video 
input signals: Video). Therefore, if audio signals are being input to a different 
port from the default port, you will need to select the...

Using the Configuration Menu Functions
24
Prompt Sets whether the input signal name is displayed on the screen or not when the 
input signal is changed.ON
Color Mode 
PromptSets whether the colour mode prompt is displayed on the screen or not when 
the colour mode is changed.ON
A/V Mute Sets the screen status when the [A/V Mute] button on the remote control is 
pressed.Black
Sleep Mode Sets the energy saving operation when no signal is being input.
•
•• •When set to ON, projection stops automatically and...

Settings and Useful Functions
25
•
•• •The About menu shows the setting details for the current image source.
•
•• •The Lamp item appears as 0H for 0–10 hours, and after that, it appears in units of 1 hour.
Rear Proj. Use when projecting images from behind a translucent screen. 
When set to ON, the projected images are horizontally reversed.OFF
Ceiling Use when installing the projector to a ceiling. When set to ON, the projected 
images are horizontally and vertically reversed.OFF
Reset Resets all...

Using the Configuration Menu Functions
26
Reset All Menu
Sub-menuFunctionDefault
Execute Resets all items in all menus to their default settings.
•
•• •Press the [Enter] button to display the confirmation screen, and select Yes.
•
•• •Select Reset in an individual menu to reset only the settings for the items in 
each sub-menu.
•
•• •The Cinema Filter, Input Signal, Video Signal, Lamp and 
Language settings will not return to their default settings.-
Execute
: Select : Execute
Video
Audio
Setting...

Settings and Useful Functions
27
The configuration menus can be operated using the remote control only.
Procedure
1Press the [Menu] button on the remote 
control.
The configuration menu appears.
The configuration menu consists of a main menu 
and sub-menus. The sub-menu that corresponds 
to the currently-selected item in the main menu 
(displayed in yellow) appears.
2
Select a menu item.
Press the [ ] or [ ] button to move to an item to 
be selected.
3Confirm the selection.
Press the [Enter] button to...

Using the Configuration Menu Functions
28
5
Select a setting value.
Press the [ ] and [ ] buttons to change the 
setting value.
For commands which have ON/OFF settings, use 
the [ ] and [ ] buttons to select the desired 
setting, and then press the [Enter] button.
6
Select other menu items in the same 
way.
Repeat steps 2 to 5 to change the setting for other 
menu items. To return to a previous menu, press 
the [ESC] button.
7Close the menu.
Press the [Menu] button.
•
•• •Sub-menu items which cause...