Epson Projector Elp 3000 User Manual

Tracking
Matches the projector’s internal clock to the various
computer graphics signals. If vertical lines appear within
an image, adjust Tracking to spread the distance between
the lines until they disappear
Red
Green
Blue
Text
(PC only)
Adjusts the strength of the red level.
Adjusts the strength of the green level.
Adjusts the strength of the blue level.
Compresses the projected image to fit into the projector’s
640-pixel image area. Normally you need to compress
an image only if your DOS software...

Video menuBrightness
Contrast
Sharpness
Color
ModeLightens or darkens the overall image. Increase bright-
ness to lighten an image; decrease it to darken an image.
Adjusts the degree of difference between light and dark
areas. Increase the contrast if you want light areas to be
very light and dark areas to be very dark Decrease
contrast to minimize the difference between the lightest
and darkest parts of the image.
Emphasizes or de-emphasizes edges within an image.
Increase sharpness for more edge...

TintWhen Auto is selected, the projector automatically
identifies the incoming video signal. If you select NTSC,
PAL, or SECAM, the projector accepts only the selected
video signal. Normally you should not change the default
setting.
Adjusts the red/green color balance. Increase tint to make
the image more green; decrease to make it more red.Display menu
HorizontalMoves the image left or right. To move the image to the
right, increase the setting; to move it to the left, decrease
the setting....

38
Blank To
Rear Proj
Upside Down
Invert
3 l Using the Menus
Selects the color shown on the screen when you use the
Blank setting to clear the screen. Choose Black, White, or
Blue. For a description of Blank, see page 41.
Flips the right and left of the projected image so the
projector can be used for rear projection. For front
projection, Rear Proj should be off.
Flips the horizontal axis of the image so the projector can
be turned upside down from a ceiling mount.
Substitutes each color with its...

Audio menuVolume
Balance
Audio Source
Bass
Treble
Loudness
Fade
Increases or decreases the volume.
Distributes sound between the left and right speakers.
Increase the setting for more sound on the left and less on
the right. Decrease it for more sound on the right.
Specifies whether audio is supplied only from the
computer (C), only from the video source (V), or from
the currently selected source (CV, the default), If you
select C or V, pressing the Video button does not switch
the audio.
Increases or...

40Options menu
Prompt
Backgrnd
serial
Power Save
Delay On
3 l Using the Menus
Temporarily displays a prompt on the projector screen to
identify which source (computer or video) is providing
the image. This prompt appears only when you switch the
image source.
Specifies what is shown onscreen when an image signal
is not available. The options are Test Pattern (default),
Black, or Blue.
Enables communication between your computer and the
projector. See Chapter 4 for more information.
Specifies in minutes...

LanguageSpecifies the language used in the menus. The choices are
English (default), Deutsch, Francais, Espanol, Italiano,
and Japanese.Custom menu
The Custom menu allows you to use the Custom button to immediately access one
of the following four functions:
lPattern (default), Displays a test pattern on the screen.
lSerial. Enables communication between the projector and your computer if
you have installed the Serial Communication Kit.
lBlank. Turns off the image display and blanks the screen to black,...

Remote Control of the
Computer
Thischapter describes the ELP Remote Programmer. When this utility is
running on your computer, you can use the remote control to control your
software program. The trackball moves the mouse on your computer, and the
five programmable buttons can be used to drag or click windows or icons.
If you wish, you can also assign a keyboard macro to a programmable button.
A macro is a sequence of up to 32 keystrokes and mouse commands. If you
assign a macro to a button, pressing the...

ELP Remote Programmer Templates
Five buttons on the remote control can control the computer if you are running
the ELP Remote Programmer. The five programmable buttons are the Prev, Next,
Drag, and Adjust (+ and -) buttons.
The keys and mouse commands assigned to each button are stored in a file
called a template. The ELP Remote Programmer comes with a series of tem-
plates. Each is customized for several popular software programs.
Only one template can be active at a time. The following table shows the...

Starting the ELP Remote Programmer
The ELP Remote Programmer can run under Windows or on the Macintosh. This
section provides general information that applies to both platforms. For specific
information on how to use the ELP Remote Programmer on your platform, see
the online help, which is available by selecting Help in the menu bar.
Do the following to start the ELP Remote Programmer:l
Windows: Open the ELP Utility program group by double-clicking on it.
Then double-click the ELP Remote Programmer...