Epson Projector Eb W8d User Manual

59
Settings and 
Adjustments
Abkhazian 6566 Gaelic; Scottish Gaelic 7168 Magyar 7285 Sinhalese 8373
Afar 6565 Gallegan 7176 Malayalam 7776 Slovensky 8373
Afrikaans 6570 Georgian 7565 Maltese 7784 Slovenian 8376
Amharic 6577 Gikuyu; Kikuyu 7573 Manx 7186 Somali 8379
Arabic 6582 Guarani 7178 Maori 7773 Sotho; Southern 8384
Armenian 7289 Gujarati 7185 Marathi 7782 South Ndebele 7882
Assamese 6583 Hausa 7265 Marshallese 7772 Sundanese 8385
Avestan 6569 Herero 7290 Moldavian 7779 Suomi 7073
Aymara 6589 Hindi...

60
Playback Disc“Digital Output” Settings
StreamPCM
Linear PCM DVD video Linear PCM Stereo
DTS DVD video DTS bit stream48 kHz, 16 bit linear PCM
Dolby digital DVD video Dolby digital bit stream 48 kHz, 16 bit stereo linear PCM
Audio CD, Video CD, SVCD 44.1 kHz, 16 bit stereo linear PCM/48 kHz, 16 bit linear PCM
DTS Audio CD DTS bit stream 44.1 kHz, 16 bit linear PCM
MP3/WMA disc 32/44.1/48 kHz, 16 bit linear PCM
“Digital Output” settings and output signals 

61
Settings and 
Adjustments
You can adjust the brightness, contrast, and other values of the projected image.
1Press   during projection.
The following menu is displayed.
2Press   to select the item to be set, and then 
press .
3Press   to select the item to be set, and then 
press   to adjust.
•When options are displayed, select a desired option and press   to 
enable it.
4After setup is complete, press   to close the menu.
Operations and functions on the 
Visual Setup menu
Operations on the Visual...

62
Image page
When the color mode is set to “Auto”, you cannot make the setting. sp. 25
Signal page
Setting ItemSetting Contents
BrightnessAdjusts the image brightness.
ContrastAdjusts the difference between light and shade in the images.
Color SaturationAdjusts the color saturation for the images. (This is not displayed 
when a computer is connected.)
TintAdjusts the image tint. (This is not displayed when the external 
video or computer connected is not NTSC.)
SharpnessAdjusts the image sharpness....

63
Settings and 
Adjustments
Option page
Info page
Setting ItemSetting Contents
Mic Input LevelAdjust if the Mic Input Level is too low to hear from the projector’s 
speaker, or if the level is too high making the audio crack. When the 
Mic Input Level is turned down to “0”, no audio is output from the 
speaker.
User ButtonYou can select the item assigned from the Visual Setup menu with 
the remote controls     . By pressing the   the assigned 
menu item selection/adjustment screen is displayed, allowing...

64
The projector has the following enhanced security functions.
•Password Protect
You can limit who can use the projector.
•Anti-Theft Lock
The projector is equipped with various types of anti-theft security devices.
When the Password Protect function is activated, people who do not know the 
password cannot use the projector to project images even if the projector 
power is on.  If a wrong password is entered when starting the projector, you 
cannot eject the disc. sp. 65
This acts as an anti-theft...

65
Settings and 
Adjustments
3Set the password.
(1)Select Password, and then press the   button.
(2)When the message Change the password? is displayed, select Yes 
and then press the    . The default setting for the password is 
0000. Change this to your own desired password. If you select 
No, the Password Protect setting menu shown in step 1 is displayed 
again.
(3)Enter a four digit number using the numeric buttons. The number 
entered is displayed as * * * *. When you enter the fourth digit, the...

66
The projector includes the following security devices to prevent from being stolen.
•Security slot
The security slot is compatible with the Microsaver Security System manufactured by Kensington. You can find details 
about the Microsaver Security System on the Kensington homepage
http://www.kensington.com/.
•Security cable installation point
A commercially available theft-prevention wire lock can be passed through the installation point to secure the 
projector to a desk or pillar.
Installing the wire...

67
Appendix
Appendix
You can check the status of this unit using the 
indicators on the top panel.
Check each condition in the following table and follow 
the steps to remedy the problem.
* If all indicators are not lit, the power cable is not 
connected correctly or the unit is not powered.
Troubleshooting
When the   or   indicators flash orangeWarning  : lit      : flashing    : off
High Temperature 
alarm
You can continue 
projecting in this state. 
Projection stops 
automatically if 
subsequent high...

68
When   lights on redError   : lit    : flashing    : off
Internal failure
Wait for approximately 1 minute and 30 seconds. 
Then, disconnect and reconnect the power cable.
If the indicator status does not change when  
 is pressed and the power turned on...
Fan related error/Sensor error
High temperature error 
(overheating)
The lamp turns off automatically and 
projection stops. Wait for approximately 5 
minutes. When the Power indicator color 
changes to orange, check for the 3 points 
shown at...