Epson Projector Eb W8d User Manual

9
•The LCD panel is manufactured using extremely 
high-precision technology.
However, black dots may appear on the panel, or 
some red, blue or green dots may light up extremely 
brightly at times. Furthermore, sometimes striped 
color irregularities or brightness irregularities may 
also appear. They are caused by the characteristics of 
the LCD panel, and are not a sign of malfunction.
•Screen burn may remain in the projected image when 
a high-contrast still image is projected for more than 
15...

10
Readable disc types
The following discs can be played.
•The performance and tonal quality of copy-
control CD discs that do not conform to the 
compact disc (CD) standard cannot be 
guaranteed with this unit. CDs that conform to 
the CD standard will bear the following compact 
disc logo mark. Check what is displayed on the 
packaging of the audio disc.
•This unit conforms to the NTSC and PAL 
television signal formats.
•In the case of DVD video, SVCD, and Video CD, 
playback functions may be...

11
Unreadable disc types
•The following discs cannot be played.
•Round discs with a diameter other than 8 cm or 
12 cm
•Irregularly shaped discs
Disc Handling
•Avoid touching the playback side with your bare 
hands.
•Be sure to store discs in their cases when not in 
use.
•Avoid storing your discs in places with high 
humidity or in direct sunlight.
•If the playback surface of the disc is dirty with 
dust or fingerprints, the image and audio quality 
may deteriorate. When the playback surface is 
dirty,...

12
Parts Name and Functions
NameFunction
ASlide lens cover knob.Slide the knob to open and close the slide lens cover.
BSlide lens coverClose the lens cover to protect the lens when the unit is not in use.
You can stop the projection completely by closing the lens cover during projection. However, if 
this state continues for 30 minutes, the unit lamp is turned off automatically. 
sp. 18
CDisc indicator
Lights up green when a disc is inserted into the disc slot. sp. 19
DEject button
Press this button to...

13
NameFunction
AAudio input portCan be connected to the audio output port of the connected video device or a computer. 
sp. 48, 49
BVideo input portCan be connected to the ordinary image output port of a video device. sp. 48
CComputer input portCan be connected to the RGB output port of a computer. sp. 46
DHDMI input portConnects an HDMI-format video device or a computer to the unit.sp. 49
EComponent input portCan be connected to the component (YCbCr or YPbPr) output port of a video device. sp. 49...

14
NameFunction
AFocusing ringMove to the left or right for image focusing. sp. 20
BZoom ringMove to the left or right for image zooming. sp. 20
CStatus indicatorIf a problem occurs in the unit, the status indicator blinks or lights up to indicate the problem. 
sp. 67
DAmbient light sensorDetects the brightness of the room.  When “Auto” is selected in the color mode, the projector 
optimizes the image automatically. 
sp. 25
ELamp coverWhen replacing the lamp, open this cover and replace the lamp. sp. 75...

15
NameFunction
ARemote control light-
emitting areaEmits remote control signals. sp. 16
BTurns power supply to the unit on or off. sp. 22
CCorrects keystone distortion of the screen image to square or rectangular. sp. 21
DPress this button to eject a disc from the disc slot. sp. 22
EFunction/numeric toggle 
switchSwitches between the functions and numerics you wish to use. Slide this switch to the Function 
position to use any function. 
sp. 26
Remote Control
E
D
sp. 37sp. 32
sp. 34sp. 39
sp. 54sp. 55...

16
At the time of purchase, the batteries are not installed into the remote control.
Insert the batteries provided with this unit, before use.
A Push in the catch on the rear of the remote control, then lift it 
upwards.
B Insert the batteries observing correct polarity.
C Close the battery cover.
Preparing the Remote Control
If delays in the responsiveness of the remote control occur, or if it does not 
operate after it has been used for some time, it probably means that the 
batteries are becoming flat...

17
Quick Start
Quick Start
Playback procedure
No complicated connections are necessary. You do not even need to select the television type or change the input.
You can enjoy your DVDs on the big screen by following these four easy steps.
The standard speakers support virtual surround sound system, and you can enjoy real stereo surround sound using the left 
and right speakers.
Position in front of 
the screen.
sp. 18Connect the power 
cable.
sp. 18Play a disc.
sp. 19Adjust the 
projection position,...

18
APlace the unit in a position that will 
enable the optimum size image to be 
projected on the screen.
When you use a 16:9 ratio, 80” type widescreen, 
for example, place the unit approximately 231 cm 
away from the screen.
* The distance from the center of the lens to the base of the 
screen.
The further this unit is moved away from the 
screen, the larger the projected image becomes. 
Values are just reference.
For detailed projection distance values sp. 78
BPosition this unit so that it is parallel...