Epson Projector BrightLink Pro 1430Wi User Manual
Have a look at the manual Epson Projector BrightLink Pro 1430Wi User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1734 Epson manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Setting OptionsDescription Net. Info - Wireless LAN Connection mode Displays wireless network status and details Wireless LAN Sys. Antenna level Projector Name SSID DHCP IP Address Subnet Mask Gateway Address MAC Address Net. Info - Wired LAN Projector NameDisplays wired network status and details DHCP IP Address Subnet Mask Gateway Address MAC Address Network Configuration Accesses additional network Configures your network settings menus Parent topic: Adjusting the Menu Settings Related references Wireless LAN Menu Settings Related tasks Selecting Wired Network Settings Selecting Wireless Network Settings Manually 251
Projector Setup Settings - ECO Menu Settings on the ECO menu let you customize projector functions to save power. When you select a power-saving setting, a leaf icon appears next to the menu item. Setting OptionsDescription Power Consumption AutoSelects the brightness mode of the projector lamp Normal Auto: sets the projector to sense ECO the optimum lamp brightness and adjust the lamp brightness accordingly Normal: sets maximum lamp brightness ECO: reduces lamp brightness and fan noise, and saves power and lamp life Light Optimizer OnWhenPower Consumption is set to Normal, the lamp Off brightness is adjusted based on the projected image; you can set this option for each color mode 252
Setting OptionsDescription Sleep Mode OnAutomatically places the projector in standby mode after Off an interval of inactivity Sleep Mode Timer 1 to 30 minutesSets the interval for Sleep Mode A/V Mute Timer OnAutomatically turns off the projector after 30 minutes ifA/V Off Muteis enabled Standby Mode Communication OnEnable this setting to allow the following operations to occur Communication Off when the projector is in standby mode: • Monitor and control the projector over a network • Output audio and video to an external device (A/V Output must be set to Always On) ECO Display OnDisplays a leaf icon in the bottom left corner of the projected screen Off to indicate the power-saving status when the lamp brightness changes Parent topic: Adjusting the Menu Settings Related references Projector Lamp Specifications 253
Projector Information Display - Info Menu You can display information about the projector and input sources by viewing the Info menu. However, you cannot change any settings in the menu. SelectVersion to display the projectors firmware version. Select Projector Infoto display the settings described below. Note: Available settings depend on the current input source. The lamp usage timer does not register any hours until you have used the lamp for at least 10 hours. Information item Description Lamp Hours Displays the number of hours (H) the lamp has been used in Normal andECO Power Consumption modes; if the information is displayed in yellow, obtain a genuine Epson replacement lamp soon Source Displays the name of the port to which the current input source is connected Input Signal Displays the input signal setting of the current input source Resolution Displays the resolution of the current input source Video Signal Displays the video signal format of the current input source 254
Information item Description Refresh Rate Displays the refresh rate of the current input source Sync Info Displays information that may be needed by a service technician Status Displays information about projector problems that may be needed by a service technician Serial Number Displays the projectors serial number Event ID Displays the Event ID number corresponding to a specific projector problem; see the list of Event ID codes Event ID Code List Parent topic: Adjusting the Menu Settings Event ID Code List If theEvent ID option on the Info menu displays a code number, check this list of Event ID codes for the solution to the projector problem associated with the code. Event ID code Cause and solution 0432 The EasyMP Network Projection program did not start. Turn the projector off and then on again. 0435 0434 Unstable network communication. Check the network communication status, wait a few moments, and try connecting to the network again. 0482 0484 0485 0433 Cannot display the transferred images. Restart the EasyMP Network Projection program. 0481 Communication with computer was disconnected. Restart the EasyMP Network Projection program. 0483 The EasyMP Network Projection program quit unexpectedly. Check the network communication status, then turn the projector off and then on again. 04FE 255
Event ID code Cause and solution 0479 A projector system error has occurred. Turn the projector off and then on again. 04FF 0891 Cannot find an access point with the same SSID. Set your computer, access point, and projector to the same SSID. 0892 The WPA/WPA2 authentication type does not match. Make sure the wireless network security settings are correct. 0893 The WEP/TKIP/AES encryption type does not match. Make sure the wireless network security settings are correct. 0894 Communication with unauthorized access point was disconnected. Contact your network administrator. 0898 Failed to acquire DHCP. Make sure the DHCP server is operating correctly. If you are not using DHCP, turn off the DHCPsetting in the Network menus. 0899 A communication error has occurred. Try restarting the EasyMP Network Projection program and restarting your projector. If that does not solve the problem, contact Epson for help. 089A The EAP authentication type does not match the network. Check the wireless LAN security settings and make sure that the security certificate is installed correctly. 089B EAP server authentication failed. Check the wireless LAN security settings and make sure that the security certificate is installed correctly. 089C EAP client authentication failed. Check the wireless LAN security settings and make sure that the security certificate is installed correctly. 089D Key exchange failed. Check the wireless LAN security settings and make sure that the security certificate is installed correctly. 0B01 The internal storage could not be detected correctly. Select Delete All Internal Data in the Basic menu under Whiteboard Settings. Turn off the projector and disconnect the power cord, then reconnect the power cord and turn the projector back on. If that does not solve the problem, contact Epson for help. 0BFF An error has occurred in the whiteboard function. Restart the projector. Parent topic: Projector Information Display - Info Menu 256
Projector Reset Options - Reset Menu You can reset most of the projector settings to their default values using the Reset Alloption on the Reset menu. You can also reset the projectors lamp usage timer to zero when you replace the lamp using the Reset Lamp Hours option. You cannot reset the following settings using the Reset Alloption: • Input Signal • Users Logo • Language • Network menu items • Lamp Hours • Password • Zoom • Image Shift Parent topic: Adjusting the Menu Settings 257
Maintaining and Transporting the Projector Follow the instructions in these sections to maintain your projector and transport it from place to place. Projector Maintenance Transporting the Projector Projector Maintenance Your projector needs little maintenance to keep working at its best. You may need to clean the projection window and obstacle sensor periodically, and clean the air filter and air vents to prevent the projector from overheating due to blocked ventilation. The only parts you should replace are the lamp, air filter, pen batteries and tips, control pad batteries, and remote control batteries. If any other part needs replacing, contact Epson or an authorized Epson servicer. Warning:Before cleaning any part of the projector, turn it off and unplug the power cord. Never open any cover on the projector, except as specifically explained in this manual. Dangerous electrical voltages in the projector can injure you severely. Warning: Do not try to service this product yourself, except as specifically explained in this manual. Refer all other servicing to qualified servicers. Cleaning the Projection Window Cleaning the Obstacle Sensor Cleaning the Projector Case Air Filter and Vent Maintenance Projector Lamp Maintenance Replacing the Remote Control Batteries Replacing the Interactive Pen Batteries Replacing the Interactive Pen Tips Parent topic: Maintaining and Transporting the Projector Cleaning the Projection Window Clean the projection window periodically, or whenever you notice dust or smudges on the surface. • To remove dust or smudges, gently wipe the projection window with lens-cleaning paper. 258
• To remove stubborn smudges, moisten a soft, lint-free cloth with lens cleaner and gently wipe the projection window. Warning: Do not use a lens cleaner that contains flammable gas. The high heat generated by the projector lamp may cause a fire. Caution: Do not use canned air, or the gases may leave a flammable residue. Parent topic: Projector Maintenance Related tasks Turning Off the Projector Cleaning the Obstacle Sensor Clean the projectors obstacle sensor glass (circled in red) periodically, or if you see a message telling you to remove any obstacles that are interfering with the projection area. • To remove dust or smudges, gently wipe the obstacle sensor glass with lens-cleaning paper. • To remove stubborn smudges, moisten a soft, lint-free cloth with lens cleaner and gently wipe theobstacle sensor glass. Warning: Do not use a lens cleaner that contains flammable gas. The high heat generated by the projector lamp may cause a fire. 259
Caution: Do not use canned air, or the gases may leave a flammable residue. Parent topic: Projector Maintenance Related tasks Turning Off the Projector Cleaning the Projector Case Before cleaning the projector case, turn off the projector and unplug the power cord. • To remove dust or dirt, use a soft, dry, lint-free cloth. • To remove stubborn dirt, use a soft cloth moistened with water and mild soap. Do not spray liquiddirectly on the projector. Caution: Do not use wax, alcohol, benzene, paint thinner, or other chemicals to clean the projector case. These can damage the case. Do not use canned air, or the gases may leave a flammable residue. Parent topic: Projector Maintenance Related tasks Turning Off the Projector Air Filter and Vent Maintenance Regular filter maintenance is important to maintaining your projector. Your Epson projector is designed with an easily accessible, user-replaceable filter to protect your projector and make regular maintenance simple. Filter maintenance intervals will depend on the environment. If regular maintenance is not performed, your Epson projector will notify you when the temperature inside the projector has reached a high level. Do not wait until this warning appears to maintain your projector filter as prolonged exposure to high temperatures may reduce the life of your projector or lamp. Damage due to the failure to properly maintain the projector or its filter may not be covered by the projector or lamp Limited Warranties. Cleaning the Air Filter and Vents Replacing the Air Filter Parent topic:Projector Maintenance Cleaning the Air Filter and Vents Clean the projectors air filter or vents if they get dusty, or if you see a message telling you to clean them. 260