Epson Projector BrightLink Pro 1430Wi User Manual

Setting a Password
To use password security, you must set a password.
1. Hold down the Freezebutton on the remote control for about ten seconds or until you see this menu.
2. Press the down arrow to select Passwordand pressEnter.
You see the prompt Change the password?.
3. Select Yesand press Enter.
4. Press and hold down the Numbutton on the remote control and use the numeric buttons to set a
four-digit password.
The password displays as **** as you enter it. Then you see the confirmation prompt.
5....

7. Make a note of the password and keep it in a safe place in case you forget it.
Parent topic:
Password Security Types
Selecting Password Security Types After setting a password, you see this menu, allowing you to select the password security types you want
to use.
If you do not see this menu, hold down the Freezebutton on the remote control for five seconds until the
menu appears.
1. To prevent unauthorized use of the projector, select Power On Protection, pressEnter, selectOn,
press Enter again, and...

Projector Network Settings - Network Menu
Related tasks
Turning On the Projector
Saving a Users Logo Image to Display
Related topics
Scheduling Projector Events
Entering a Password to Use the Projector If a password is set up and a Power On Protectionpassword is enabled, you see a prompt to enter a
password whenever you turn on the projector.
You must enter the correct password to use the projector.
1. Press and hold down the Numbutton on the remote control while you enter the password using the
numeric...

The password screen closes.
2. If the password is incorrect, the following may happen: • You see a wrong password message and a prompt to try again. Enter the correct password toproceed.
• If you enter an incorrect password several times in succession, the projector displays a request code and a message to contact Epson Support. When you contact Epson Support, provide the
displayed request code and proof of ownership for assistance in unlocking the projector.
Parent topic: Password Security Types
Related...

3. Select the
Users Logosetting and press Enter.
You see a prompt asking if you want to use the displayed image as a users logo.
4. Select Yesand press Enter.
You see a selection box overlaying your image.
5. Use the arrow buttons on the remote control to surround the image area you want to use as the Users Logo and press Enter.
You see a prompt asking if you want to select this image area.
6. Select Yesand press Enter. (If you want to change the selected area, select No, pressEnter, and
repeat the last...

12. Select when you want to display the Users Logo screen:
• To display it whenever there is no input signal, select Display Backgroundand set it toLogo.
• To display it whenever you turn the projector on, select Startup Screenand set it toOn.
• To display it whenever you press the A/V Mutebutton, select A/V Muteand set it to Logo.
To prevent anyone from changing the Users Logo settings without first entering a password, set a
password and enable Users Logo security.
Parent topic: Password Security...

• To lock all buttons except the power button, select
Partial Lock.
You see a confirmation prompt.
5. Select Yesand press Enter.
Unlocking the Projectors Buttons
Parent topic: Projector Security Features
Unlocking the Projectors Buttons If the projectors buttons have been locked, hold the Enterbutton on the projectors control panel for
seven seconds to unlock them.
Parent topic: Locking the Projectors Buttons
Installing a Security Cable You can install two types of security cables on the projector to...

Creating a User Pattern to Display
You can transfer an image to the projector and then display it as a pattern to aid in presentations when
you use the Pattern Display feature. This transferred image is called the User Pattern.
1. Display the image you want to project as the User Pattern from a connected computer or videosource.
2. Press the Menubutton, select the Settingsmenu, and press Enter.
3. Select the Patternsetting and press Enter.
4. Select the User Patternsetting and press Enter.
You see a...

Using the Interactive Features
Follow the instructions in these sections to use your projectors interactive features.
Interactive Modes
Using the Interactive Pens
Using Finger Touch Interactivity
Using BrightLink With a Computer
Whiteboard Mode
Annotation Mode (PC Free)
Splitting the Screen
Interactive Modes The BrightLink interactive features turn any wall into an interactive whiteboard, either with or without a
computer. These interactive modes are available:
• In whiteboard mode, you can use one or...

Annotation Mode (PC Free)
Using the Interactive Pens The BrightLink interactive pens turn any wall into an interactive whiteboard, either with or without a
computer.
• With a computer, you can use Easy Interactive Tools. This software lets you use the pen as a mouseto annotate, save, and interact with content from your computer. Two people can annotate at the same
time.
• Without a computer, you can use the built-in toolbar. This lets you annotate images from a document camera, iPad, DVD player, or other...