Epson Projector BrightLink 585Wi User Manual

Note:
The toolbar arrows disappear if they are not used. To make them reappear, tap the projection
surface with the pen or your finger (BrightLink 595Wi).
3. To display the toolbar, select one of the arrows. Note: You can use the pen or your finger (BrightLink 595Wi) to move the arrows up or down.
4. To close the toolbar, select the icon at the bottom of the toolbar.
Note: If you want to hide the toolbar automatically after drawing, select the icon at the bottom of the
toolbar.
Parent topic: Using...

In the following illustration, the annotation mode tools are shown on the left, and the whiteboard
annotation mode tools on the right:
Switch to annotation mode
Switch to whiteboard annotation mode
Undo the last annotation
Redo the last undo
Select a white or black background or one of 4 patterns (whiteboard mode only)
Change custom pen color and width
Write or draw free-form lines with custom pen 152         

Change highlighter pen color
Write or draw free-form lines with transparent highlighter pen
Black pen (fine point on left, thick on right)
Red pen (fine point on left, thick on right)
Blue pen (fine point on left, thick on right)
Eraser (thin width on left, thick on right)
Clear all annotations
Hide the toolbar after each annotation
Close the toolbar
Parent topic: Using BrightLink Without a Computer
Using the Built-in Whiteboard Annotation Mode In whiteboard annotation mode, you can project a solid or...

3. Do one of the following to write or draw on the background.
• To erase, select the Eraser tool.
• To clear the whole screen, select the Clear all tool.
Parent topic: Using BrightLink Without a Computer
Changing Pen Width and Color Using the Built-in Toolbar
When you use the custom Pen or highlighter tools, you can select different colors and line widths.
Note:You can also select the Black, Red, or Blue pen on the toolbar, and select the small circle on the
left of the pen for a thin line, or the large...

Turn off the projector
Change the image source using a displayed list.
(To close the image source list, select the arrow icon at the bottom of the list.)
Zoom into and out of the image
Turn off the picture and sound
Pause video action
Decrease the volume
Increase the volume
Close the projector control toolbar
Selecting Network Device Display from the Projector Control Toolbar
Parent topic: Using BrightLink Without a Computer
Related tasks
Turning On the Projector
155         

Controlling the Volume with the Volume Buttons
Starting a PC Free Movie Presentation
Resizing the Image with the Wide and Tele Buttons
Selecting an Image Source
Selecting Network Device Display from the Projector Control Toolbar If you have connected devices to the projector via a network, you can select to project an image from up
to 50 of those devices using the projector control toolbar. You can select the image source from
computers that are running EasyMP Multi PC Projection, and smartphones or...

3. Select the user name for the device from which you want to project.
4. Select
Return.
You see the selected users screen image.
Parent topic: Projector Control Toolbar
157  

Adjusting the Menu Settings
Follow the instructions in these sections to access the projector menu system and change projector
settings.
Using the Projectors Menus
Image Quality Settings - Image Menu
Input Signal Settings - Signal Menu
Projector Feature Settings - Settings Menu
Projector Setup Settings - Extended Menu
Projector Network Settings - Network Menu
Projector Setup Settings - ECO Menu
Projector Information Display - Info Menu
Projector Reset Options - Reset Menu
Using the Projectors Menus You...

You see the menu screen displaying the Image menu settings.
2. Press the up or down arrow buttons to move through the menus listed on the left. The settings for each menu are displayed on the right.
Note: The available settings depend on the current input source.
3. To change settings in the displayed menu, press Enter.
4. Press the up or down arrow button to move through the settings.
5. Change the settings using the buttons listed on the bottom of the menu screens.
6. To return all the menu settings to...

Image Quality Settings - Image Menu
Settings on the Image menu let you adjust the quality of your image for the input source you are currently
using. The available settings depend on the currently selected input source.
To change settings for an input source, make sure the source is connected and select that source.
Setting OptionsDescription
Color Mode See the list of available Color Adjusts the vividness of image
Modescolors for various image types
and environments
Brightness Varying levels available...