Epson Projector BrightLink 585Wi User Manual

Entering a Password to Use the Projector
If a password is set up and a Power On Protectionpassword is enabled, you see a prompt to enter a
password whenever you turn on the projector.
You must enter the correct password to use the projector.
1. Hold down the Numbutton on the remote control while you enter the password using the numeric
buttons.
The password screen closes.
2. If the password is incorrect, the following may happen: • You see a wrong password message and a prompt to try again. Enter the...

• If you enter an incorrect password several times in succession, the projector displays a request
code and a message to contact Epson Support. When you contact Epson Support, provide the
displayed request code and proof of ownership for assistance in unlocking the projector.
Parent topic: Password Security Types
Saving a Users Logo Image to Display You can transfer an image to the projector and then display it whenever the projector turns on. You can
also display the image when the projector is not...

3. Select the
Users Logosetting and press Enter.
You see a prompt asking if you want to use the displayed image as a users logo.
4. Select Yesand press Enter.
You see a selection box overlaying your image.
5. Use the arrow buttons on the remote control to surround the image area you want to use as the Users Logo and press Enter.
You see a prompt asking if you want to select this image area.
6. Select Yesand press Enter. (If you want to change the selected area, select No, pressEnter, and
repeat the last...

You see a prompt asking if you want to save the image as the Users Logo.
8. Select Yesand press Enter.
Note: It takes a few moments for the projector to save the image; do not use the projector, its remote
control, or any connected equipment until it is finished.
You see a completion message.
9. Press Escto exit the message screen.
10. Select the Extendedmenu and press Enter.
11. Select Displayand press Enter.
12. Select when you want to display the Users Logo screen: • To display it whenever there is no...

2. Select the
Settingsmenu and press Enter.
3. Select the Control Panel Lock setting and pressEnter.
4. Select one of these lock types and press Enter:
• To lock all of the projectors buttons, select Full Lock.
• To lock all buttons except the power button, select Partial Lock.
You see a confirmation prompt.
5. Select Yesand press Enter.
Unlocking the Projectors Buttons
Parent topic: Projector Security Features
Unlocking the Projectors Buttons If the projectors buttons have been locked, hold the...

• Use the security cable attachment point on the projector to attach a wire cable and secure it to a room
fixture or heavy furniture.
Parent topic: Projector Security Features
Creating a User Pattern to Display You can transfer an image to the projector and then display it as a pattern to aid in presentations when
you use the Pattern Display feature. This transferred image is called the User Pattern.
1. Display the image you want to project as the User Pattern from a connected computer or videosource.
116  

2. Press the
Menubutton, select the Settingsmenu, and press Enter.
3. Select the Patternsetting and press Enter.
4. Select the User Patternsetting and press Enter.
You see a prompt asking if you want to use the displayed image as a User Pattern.
5. Select Yesand press Enter.
Note: It takes a few moments for the projector to save the image; do not use the projector, its remote
control, or any connected equipment until it is finished.
You see a completion message.
6. Press Escto exit the message screen....

Using the Interactive Features
Follow the instructions in these sections to use your projectors interactive features.
Interactive Modes
Using the Interactive Pens
Using Finger Touch Interactivity
Using BrightLink With a Computer
Windows Pen Input and Ink Tools
Using BrightLink Without a Computer
Interactive Modes The BrightLink interactive features turn any wall into an interactive whiteboard, either with or without a
computer. These interactive modes are available:
• In whiteboard mode, you can use one...

1. Hover near or tap the board or projected image with the interactive pen or your finger (BrightLink
595Wi). Then, tap on the whiteboard icon on the toolbar.
You see the whiteboard screen, with the main toolbar on the side and the projection control toolbar
on the bottom of the screen:
2. To move the main toolbar to the other side of the screen, tap the arrow on the opposite side of the screen.
Note: You can use the pen or your finger (BrightLink 595Wi) to move the arrow icon up or down to
reposition...

4. To show or hide the projection control toolbar, select the arrow.
Note: You can also show or hide the projection control toolbar from the projectors Display menu.
Parent topic: Interactive Modes
Drawing on a Projected Image (Annotation Mode) You can project from a computer, tablet, video device, or other source and add notes to your projected
content using the interactive pens or your finger (BrightLink 595Wi). You can use one pen, both pens at
the same time, or a combination of pens and finger touch...