Epson Projector BrightLink 536Wi User Manual

							2. Select the
Easy Interactive Function setting and pressEnter.
3. Select Auto Calibration and pressEnter.
4. Adjust the image focus, if necessary.
5. Press Enterto select Yes.
A pattern appears then disappears, and the system is calibrated. If you see a message that
calibration failed, check for obstacles, disable the Quick CornerandKeystone settings, and retry
the Auto Calibration. If you still see a message that calibration failed, you need to calibrate manually.
121 
						

							The cursor location and pen position should match after calibration. If not, you may need to calibrate
manually.
Parent topic:
Pen Calibration
Calibrating Manually If the cursor location and pen position do not match after auto calibration, you can calibrate manually.
1. Press theMenubutton, select the Extendedmenu, and press Enter.
2. Select the Easy Interactive Function setting and pressEnter.
122 
						

							3. Select
Manual Calibration and pressEnter.
4. Adjust the image focus, if necessary.
5. Press Enterto select Yes.
A green circle appears in the upper left corner of your projected image.
6. Touch the center of the circle with the tip of the pen. The circle disappears, and you see another circle below the first one.
123  
						

							Note:
For the most accurate calibration, make sure you touch the center of the circle.
7. Touch the center of the next circle, then repeat. When you get to the bottom of the column, the next circle appears at the top of a new column.
Note: Make sure you are not blocking the signal between the pen and the interactive receiver (next
to the projection window on the projector).
If you make a mistake, press the Escbutton on the remote control to go back to the previous circle.
To restart the calibration process, press and hold the Escbutton for 2 seconds.
8. Continue until all of the circles disappear.
Parent topic: Pen Calibration
124   
						

							Using BrightLink With a Computer
You can connect a computer to the projector and install the software from the CD labeled Epson
Projector Software for Easy Interactive Function or you can install third party interactive software. You
can then do the following:
• Use the pens as a mouse to control your computer
• Use the Easy Interactive Tools software to annotate with two pens at the same time
Note: See the online Easy Interactive Tools Operation Guide for detailed information.
• Save and print your annotations
• Use the Tablet PC input panel in Windows 8.x, Windows 7, or Windows Vista
• Use Ink Tools for annotation in Microsoft Office applications
Adjusting the Pen Operation Area
Easy Interactive Tools
Windows Pen Input and Ink Tools
Parent topic: Using the Interactive Features
Adjusting the Pen Operation Area If you connect a different computer or adjust the computers resolution, the pen operation area is
adjusted automatically to match your mouse pointer position. If you notice that the pen position is
incorrect when using PC Interactive mode, you can adjust the pen area manually.
Note:Manual adjustment is not available when projecting from a LAN source.
1. Project your computers desktop.
125 
						

							2. Press the
Menubutton, select the Extendedmenu, and press Enter.
3. Select the Easy Interactive Function setting and pressEnter.
4. Set the Pen Modesetting toPC Interactive.
Note: You can also change this setting by pressing the Pen Modebutton on the remote control.
126 
						

							5. Select
Advanced in the PC Interactive section and press Enter.
Note: Make sure the Auto Adjust Pen Area option is set toOffto prevent changes to your manual
pen area adjustments.
6. Select Manual Adj. Pen Area and pressEnter.
You see this screen:
7. Press Enterto select Yes.
The mouse pointer moves toward the top left corner.
8. When the mouse pointer stops at the top left corner of the image, touch the tip of the pointer with the interactive pen.
The mouse pointer moves toward the bottom right corner.
127 
						

							9. When the mouse pointer stops at the bottom right corner of the image, touch the tip of the pointer
with the interactive pen.
Parent topic: Using BrightLink With a Computer
Easy Interactive Tools Your projector came with a CD containing the Easy Interactive Tools software for use with a computer.
Easy Interactive Tools lets you use your interactive pen as a mouse to navigate, select, scroll, draw,
save, and interact with projected content from your computer.
These two modes are available:
• Annotation (PC interactive) mode displays the toolbar on the projected image and lets you use the penas a mouse to open applications, access links, and operate scroll bars, for example (using one pen at
a time). You can also annotate whatever is displayed from your computer (using both pens at the
same time).
• Whiteboard mode lets you project on one of 3 solid colors or 6 background patterns, and use the toolbar to write or draw on the background. You can also import images from your computer or a
document camera. In full screen whiteboard mode, two people can use the pens at the same time.
Note: For detailed instructions on using the Easy Interactive Tools software, see the online Easy
Interactive Tools Operation Guide or the online help.
Parent topic: Using BrightLink With a Computer
Windows Pen Input and Ink Tools If you are using Windows 8.x, Windows 7, or Windows Vista, you can use the pen input and Ink tools to
add input and annotations to your work. You can also use these features over a network when you set
the interactive features to be available on your network. See the EasyMP Network Projection Operation
Guide for instructions on setting up your computer for network projection.
Enabling Windows Pen Input and Ink Tools
Using Windows Pen Input and Ink Tools
Parent topic: Using BrightLink With a Computer
Enabling Windows Pen Input and Ink Tools To use the pen input and Ink tools in Windows 8.x, Windows 7, or Windows Vista, you need to adjust the
pen operation mode in your projectors menus.
128 
						

							1. Press the
Menubutton, select the Extendedmenu, and press Enter.
2. Select the Easy Interactive Function setting and pressEnter.
3. Set the Pen Operation Mode setting in the PC Interactive section to One User/Penand press
Enter.
Parent topic: Windows Pen Input and Ink Tools
129 
						

							Using Windows Pen Input and Ink Tools
If you are using Windows 8.x, Windows 7, or Windows Vista, you can add handwritten input to your work
and convert it to text.
If you have Microsoft Office 2003 or later, you can also use the Ink function to add handwritten notes to a
Word document, Excel spreadsheet, or PowerPoint presentation.
Note:Option names for the annotation functions may vary depending on your version of Microsoft
Office.
• To open the Touch Keyboard in Windows 8.x, right-click or tap-and-hold on the Taskbar, and select Toolbars > Touch Keyboard. Select the keyboard icon on the screen and select the pen icon.
• To open the Tablet PC input panel in Windows 7 or Windows Vista, select > All Programs >
Accessories > Tablet PC > Tablet PC Input Panel.
You can write in the box using the interactive pen or your finger, and select from a variety of options to
edit and convert the text.
• To add Ink annotations in Microsoft Office applications, select the Reviewmenu, and select Start
Inking.
Note: In Microsoft Word or Excel, select the Inserttab and select Start Inking.
130