Epson Projector 7350 User Manual

Menu Options
n  n  n  n  n  n
61
7. Next, the Zoom rate setting window appears on the 
screen. Select a rate using the arrow buttons or Enter 
button, then press the Enter button.
8. The message “Do you save this user logo?” appears on the 
screen. Select Yes and press the Enter button If you don’t 
want to save the logo, select No.
¨
Note: Saving the logo may take a moment. Do not use the 
projector or other sources (computer, video, speaker, etc.) while 
the logo is being saved.
9. When the message...

n  n  n  n  n
62
Reset All Menu
Selecting the Reset All menu option resets the settings in all 
menus to their factory defaults. It does not change or delete 
any user logo you may have stored.
You will be prompted to confirm the reset action. Select Yes 
or No, then press the Enter button to reset all the settings.
Advanced Menu
The Advanced menu enables you to set various projector 
options.
Menu item Description
Language Selects the menu language: Japanese, English, 
French, German, Italian, Spanish,...

Menu Options
n  n  n  n  n  n
63 Ceiling Flips the projected image so it looks correct when 
you’re hanging the projector upside-down from the 
ceiling. Selecting ON turns this feature on, while OFF 
turns it off (for a normal image).
Mouse/Com Locks or unlocks the Mouse/Com port. 
Select 1 to assign the wireless mouse control to the 
computer connected to the Mouse/Com 1 port only.
Select 2 to assign the wireless mouse control to the 
computer connected to the Mouse/Com 2 port only.
Selecting 1 
« 2...

n  n  n  n  n
64
About Menu
The About menu displays the following information about 
your projector.
Image source = Computer or Component Video
Image source = Video
Menu item Description
Lamp Displays the number of hours the current lamp has 
been used. The lamp light turns red when the projector 
lamp is near the end of its normal life. When this 
happens, replace the projector lamp with a new one as 
soon as possible.
Frequency Displays the horizontal and vertical frequency of the 
computer.
Sync...

  n     n        n     n     n    n     n     n    n    n     n     n      n      n      n
n  n  n  n  n  n
65
4
Using the ELP Link IV 
Software
The ELP Link IV Software is a utility you can run from your 
desktop or laptop computer to control projector features and 
draw special graphics on your screen. You can also use the 
software to reconfigure the special effect buttons on the 
remote control. 

n  n  n  n  n
66
Presentation support function
The presentation support function allows you to perform real-
time presentation effectively by a remote control shipped with 
the projector. 
Projector setting function 
The projector setting function allows you to control the 
projector from your  computer. 
¨
Note: See the ELP Link IV demonstration included in the 
Projector Software CD-ROM. 
System requirements
To use the ELP Link IV utility and to look at the PDF User’s 
Guide, the following system...

System requirements
n  n  n  n  n  n
67
Using a PC
• IBM compatible PC with Pentium or higher processor 
• Microsoft Windows 95/98 or Windows NT 4.0
• At least 16MB of RAM for ELP Link IV to work
(16MB to be added for Acrobat Reader to work)
• At least 6MB of free hard disk space for ELP Link IV 
installation (8MB to be added for Acrobat Reader and 3MB 
for User’s Guide installation)
• Double-speed CD-ROM drive (Quad-speed or faster 
recommended)
• VGA or better monitor
Using a Macintosh
• 68000 series...

n  n  n  n  n
68
Projector Software CD-ROM
The following software is enclosed. 
ELP Link IV utility
Offers a lot of advantages to your presentation in using a 
cursor, bar, or stamps with the remote control shipped with 
your projector. And you can control the brightness and size of 
the screen, and the sound from your computer. 
ELP Link IV User’s Guide
Provides you with detailed information and instructions to 
use ELP Link IV. The User’s Guide is provided in a PDF 
(Portable Document Format) file. To...

Connecting the Cables
n  n  n  n  n  n
69
Connecting the Cables
When you are using the following EPSON projector, follow 
the instructions below. If not, please see the User’s Guide 
packed with your projector. 
¨
Caution: Before connecting the cables to your computer, make 
sure that the computer and projector are turned off and 
unplugged from any power source; otherwise damage may occur. 
Connecting to your PC
Using the PS/2 mouse
connect to the
PS/2 mouse portconnect to the 
serial port
PC serial...

n  n  n  n  n
70
Using the serial mouse
Connecting to your Macintosh
connect to the 
serial portconnect to the 
printer port or 
modem port
PC serial cable
PC serial mouse cable
connect to 
Mouse/Com 
connect to the 
ADB portconnect to the 
printer port or
modem port
Mac serial cable
Mac mouse cable
connect to 
Mouse/Com