Epson Projector 7350 User Manual

Controlling the Projector
n  n  n  n  n  n
41
Using the Remote Control
To use the remote control, point it towards the remote 
control receivers located at the front and back of the 
projector.
To be able to use the remote control as a cordless mouse, 
connect the mouse cable to the projector and your computer.
You can use the remote control up to 10 metres (33 feet) 
from the projector.
¨
Note: The projector may not respond to remote control 
commands in these conditions: ambient light is too bright; a...

n  n  n  n  n
42
This table summarizes the functions on the remote control.   
Button Function
Freeze Keeps the current computer or video image on the 
screen.
A/V Mute Turns off/on the audio/video output of the projector. To 
turn on the audio/video output, press either the A/V 
mute button again or Esc button.
E-Zoom Executes the E-zoom function. When you press the 
right of the button, it enlarges the image. When you 
press the left of the button, it reduces the image.
To display a portion of the...

Controlling the Projector
n  n  n  n  n  n
43 Help Displays the Help menu.
Comp 1 Switches to the computer image from Computer 1.
Comp2/BNC Switches to the image from Computer2 / BNC.
S-Video Switches to the video image from S-Video.
Video Switches to the image from Video.
Auto Optimizes the computer image.
Resize Switches the Window display and Resizing display.
P in P Displays a subscreen on the main screen. To display 
the subscreen, press the PinP button once. To hide 
the subscreen, press it again....

n  n  n  n  n
44
Using the Operation Panel
You can use the operation panel to control the projector 
instead of the remote control. However, you can program and 
access the custom features only using the remote control. 
The following table summarizes the functions on the 
operation panel.   
Button Function
Power Turns the projector on or off.
Help Displays the Help menu.
Computer Switches the computer input source.Pressing the 
button once switches to the Computer1, and pressing 
twice switches to the...

Controlling the Projector
n  n  n  n  n  n
45
* When you set the computer 2/ BNC switch on the back of the projector to the 
BNC, the computer source is switched to the BNC.
Video Switches the video input source.
Pressing the button once switches to the composite 
Video, and pressing twice switches to the S-Video.
Menu Displays or hides the menu.
Esc Terminates the current function that you have been 
executing .
If you press the Esc button when a menu or help is 
displayed, you can go back to the...

n  n  n  n  n
46
Projector Status Indicators
The power and lamp indicators at the top of the projector tell 
you its operating status.
¨
Caution: A red indicator warns you if a serious problem occurs. 
See Chapter 6, “Troubleshooting,” for what to do if a warning 
light comes on.
Operation Indicator
Displays machine condition.
Color Status Meaning
Orange Lit Sleep mode.
Green Flashing The projector is warming up. Allow about 
30 seconds.
Green Lit Power and projection lamp are on.
Orange Flashing...

Projector Status Indicators
n  n  n  n  n  n
47
Lamp Indicator
Displays lamp condition.
This indicator is off when the projector is in a normal 
condition.
Temperature Indicator
Displays the internal temperature condition.
This indicator is off when the projector is in a normal 
condition.
Color Status Meaning
- Off Lamp is functioning normally.
Orange Flashing Projection lamp has reached the end of its 
life and will not longer project images. 
Replace the projection lamp with a new 
one.
Red Flashing...

n  n  n  n  n
48 

  n     n        n     n     n    n     n     n    n    n     n     n      n      n      n
n  n  n  n  n  n
49
3
Using the Projector Menus
The eight projector menus let you to control your projector.
• The Video menu controls the look and quality of the 
projected image, whether the image source is a computer or 
video.
• The Audio menu controls audio features, such as the 
volume level, tone setting, and 3D sound.
• The Effect menu lets you define functions for the Effects 
buttons on the remote...

n  n  n  n  n
50
Accessing the Main Menu
To display the Main menu, press the Menu button on the 
operation panel or remote control. The Main menu appears:
Press the Menu button again to hide the menu. 
Changing a Menu Setting
To change a menu setting: 
1. Press the Menu button on the operation panel or remote 
control to display the Main menu.