Epson Projector 1705cuser Manual

Presenting Through a Wireless Network81
Multi-screen Projection
When using Multi-screen display, you can set each projector to 
display a section of the screen or image, to create a single image 
spanning a large area. 
Here are some examples: 
To set up multi-screen display in NS Connection, follow these steps:
1. Click 
Use multi-display.
note
For a Mac, you have to 
connect a monitor to the 
computer and use the 
multi-screen display 
function. For Windows, 
even if a monitor is not 
connected, you...

82Presenting Through a Wireless Network2. Click 
Display properties.
3. Drag the monitor icons to arrange the positions of the displays.
4. Close the Display Preferences (Windows) or System Preferences 
(Mac), when you are done arranging the display numbers.  

Presenting Through a Wireless Network83
5. To allocate projectors to each display, choose a number from the 
menu under 
Display. 
6. Click the 
Connect button when you are ready to project the 
image. 
Removing the Wireless 802.11g/b/a 
Module
Follow these steps to remove the card from your projector. 
1. If you’re running NS Connection, click 
Disconnect on the 
control bar.
 Click 
Disconnect 

84Presenting Through a Wireless Network2. Check the access light to make sure it isn’t flashing. Then pull the 
module off of the projector. 
Connecting to a Wired Network
With the optional Ethernet unit, you can connect the projector to 
your network and configure it with an IP address. 
1. Remove the wireless module, as described above, then insert the 
Ethernet unit into the projector. 
2. Connect the projector to your network using a commercially 
available 100BaseTX or 10BaseT network cable. Connect...

Presenting Through a Wireless Network85
You see the following screen:
8. Do one of the following:
■If your network assigns addresses automatically, turn on the 
DHCP setting.
■If your network does not assign addresses automatically, turn 
off 
DHCP and enter the projector’s IP Address, Subnet 
Mask
, Gateway Address, and DNS Servers, as needed. 
To enter numbers, use the  pointer button on the remote 
control to highlight the number you want to input, then press 
the 
Enter button. When you’re finished...

86Presenting Through a Wireless Network
Using Projector E-mail Alerts
When this feature is enabled, the projector sends you an e-mail alert if 
it has any problems. 
1. Press the 
Menu button on the remote control, select the 
Network menu, then press Enter. 
2. Choose 
To Network Configuration and press Enter. 
3. Choose 
Mail, then press Enter.
You see the following screen: 
4. Highlight 
On to receive email notifications, then press Enter.
5. Enter the IP address for the SMTP server for the...

Presenting Through a Wireless Network87
7. Choose one of the Destination Address fields, then enter the 
e-mail address and the contents of the message that you will 
receive when an problem or warning occurs. You can register up 
to three addresses. You can enter up to 32 alphanumeric 
characters for the e-mail address.
8. Select problems or warnings to be notified about by mail. 
When the selected problem or warning occurs, an e-mail message is 
sent to the specified notification addresses. The subject...

88Presenting Through a Wireless Network 

89
1
Presenting from a Digital 
Camera or External Drive
The projector’s EasyMP PC Free feature lets you give presentations 
from a drive or a digital camera connected to the projector via USB. 
You can play movies, display graphics, or play a scenario, a format that 
lets you create your own slideshow using PowerPoint files, JPG image 
files, and BMP graphics files. 
This chapter covers the following:
■Creating a slideshow on the fly 
■Presenting image files from a digital camera 
■Presenting image...

90Presenting from a Digital Camera or External Drive
Creating a Slideshow on the Fly
If you have a folder containing an assortment of images, you can 
display them as a slideshow. 
Displaying the Slideshow
First make sure the images are stored in a folder on the USB drive. 
Then follow these steps:
1. Use the  pointer button on the remote control to highlight the 
drive containing your images and press 
Enter. 
2. Use the  pointer button on the remote control to highlight the 
folder containing your...