Epson Projector 1705cuser Manual

Fine-Tuning the Projector121
2. Select Display and press Enter.
3. Highlight 
Display Background (for when there is no signal) or 
A/V Mute, and press Enter. 
4. Select 
Logo and press Enter.
5. When you’re finished, press Esc to exit.
Disabling the Projector’s Buttons
When you enable the Operation Lock function, you can lock all the 
projector’s buttons, or all buttons except the 
Power button.
1. Press the 
Menu button, highlight the Settings menu, and press 
Enter.
2. Select 
Operation Lock and press...

122Fine-Tuning the Projector
■Display
Use this setting to turn off the display of messages, change the 
background color, enable logo display, or turn off the startup 
screen display.
■User’s Logo
Create a custom startup screen, as described on page 119.
■Projection 
Select Front (to project from the front of a screen and right side 
up), 
Front/Ceiling (when the projector is mounted upside-down 
from the ceiling), 
Rear (to project from behind onto a 
transparent screen), or 
Rear/Ceiling (to project...

Fine-Tuning the Projector123
■Multi-screen
Enable this option if you are using the multi-screen feature to 
project from one source (one image) using multiple projectors (see 
page 81). Select 
Screen ID to define individual screen IDs. 
Choose 
Image Correction then choose an adjustment: 
Brightness Correct to adjust the brightness of each display, 
Color Correct to adjust the balance between red and green, or 
blue and yellow. 
■Language 
Select from nine languages to be used for the projector menus. 

124Fine-Tuning the Projector 

125
1
Managing Projectors 
The software included with your projector lets you monitor and 
control your projectors from a remote computer:
■Use EMP Monitor (available for Windows only) to see your 
projectors’ status, switch image sources, and control basic settings.
■Use the mail notification function to receive e-mail alerts about 
possible problems. 
■Use a network management utility running SNMP, such as 
HP OpenView, to manage your facility’s equipment from a 
pre-existing system (requires an...

126Managing Projectors
Using EMP Monitor
EMP Monitor lets you use a remote computer to manage your 
projectors, whether connected wirelessly or over a wired network. It 
lets you easily turn the projectors on or off (together or individually), 
switch image sources, and check their status. 
Before using EMP Monitor, make sure you’ve installed the software 
(available for Windows only) as described on page 166. The 
computer you’re using to monitor the projector should already 
be connected to your...

Managing Projectors127
Registering a Projector
Before you can monitor a projector, you have to register it. Follow 
these steps to automatically search for your projector(s). To manually 
register your projector(s) with EMP Monitor, refer to the on-screen 
Operation Guide.
1. Open EMP Monitor as described above. You see this screen:
2. Select 
Edit > New > Projector (automatic search).
You see this screen: 

128Managing Projectors3. Click 
Search to locate projectors currently operating on the 
network.
Any projectors found on the network are listed as shown below:
4. Select the projector you want to add by clicking its name, then 
click the 
Edit button.
You see this screen:
note
If the projector is not 
automatically found, your 
projector may not be 
connected or configured 
correctly for the network. See 
page 50. 

Managing Projectors129
5. Enter a Display name, select a Parent group, if necessary, enter a 
Monitor Password, if necessary, and a Description for the 
projector. Then click the 
Register button.
To register additional projectors with EMP Monitor, repeat steps 
2 through 5.
6. When you’re done adding projectors, click 
Cancel.
You see a screen with a list of all registered projectors:
Monitoring Your Projectors
The EMP Monitor screen lets you monitor your projectors using the 
Status, Video Source, and...

130Managing ProjectorsThe following tables describe the status icons shown on the EMP 
Monitor screen. 
Group status icons
No warnings or problems. All projectors in the group 
are operating normally.
Warning or problem. A projector in the group has a 
warning or problem.
Monitoring disabled. Right click the icon and select 
Monitoring Enabled to begin monitoring the group.
Data is currently being updated.
Type status icons
No warnings or problems. 
Warning or problem.
Monitor Password error. No monitor...