Epson Powerlite S5 Multimedia Projector Users Guide

							Setting Up the Projector21
Connecting a USB Cable for Remote 
Presentation Control
You can use the remote control to click through slideshow-style 
presentations, such as PowerPoint, from up to 20 feet away. This 
makes it easy to deliver your presentation, since you won’t need to 
stand near your computer.
To use this function, you will need a USB cable, a system with a 
working USB port, and the full version of one of these operating 
systems: 
1. If you are using a desktop computer, disconnect the mouse cable 
from your computer.
2. Connect the square end of the USB cable to the projector’s   
USB port.
3. Connect the flat end of the cable to any available USB port on 
your computer.
4. If necessary, configure your laptop to work with an external 
mouse.
If you don’t need to make any other connections, you can plug in 
your projector and turn it on. See page 32 for instructions.
Windows®Macintosh
Windows 98SE, 2000, Me, XP, or 
Windows Vista
™Macintosh OS X
note
For details about using the 
remote control to change 
presentation slides, see 
page 48.
Connect USB cable 
						

							22Setting Up the Projector
Connecting an External Monitor
If you want to see your presentation close-up as well as on the 
projection screen, you can connect an external monitor to the 
projector. This lets you view images on your computer monitor while 
the projector is in standby mode (plugged in but not turned on) and 
check your presentation or switch between picture sources even if 
you’ve pressed the 
A/V Mute button on the remote control to turn off 
projection on the screen. 
Simultaneous display is possible only when the computer is connected 
to the projector’s 
Computer (Component Video) port.
Make sure the projector and computer are off. Then connect the 
monitor’s cable to the projector’s 
Monitor Out port, as shown:
If you don’t need to make any other connections, you can plug in 
your projector and turn it on. See page 32 for instructions.
note
Some LCD monitors may 
not be able to display the 
image correctly. If you have 
trouble displaying the 
image, connect a multiscan 
monitor. If you’re projecting 
computer images, make sure 
the computer’s refresh rate is 
set to 65 Hz or greater.
Connect external 
monitor 
						

							Setting Up the Projector23
Playing Sound Through the Projector
You can connect a commercially available computer audio adapter 
cable to take advantage of the projector’s built-in speaker. You can 
obtain an audio adapter cable (3.5-mm stereo miniplug to two male 
RCA plugs) from a computer or electronics dealer.
1. Connect the RCA plugs on the audio adapter cable to the 
corresponding 
L-Audio-R jacks on the projector.
2. Connect the other end of the audio cable to your laptop’s
 headphone jack or   audio-out jack, or your desktop’s 
speaker or audio-out port.
If you don’t need to make any other connections, you can plug in 
your projector and turn it on. See page 32 for instructions.
Connect audio 
adapter RCA plugs 
						

							24Setting Up the Projector
Connecting to Video Sources
You can connect a DVD player, VCR, camcorder, digital camera, 
gaming console, or any other compatible video source to your 
projector. You can connect up to three video devices at one time. 
The projector supports HDTV, SDTV, NTSC, PAL, and SECAM, 
and automatically detects the video format. It can receive composite 
video, S-Video, RGB video, and component video. The type of cable 
you need depends on the video source: 
■For composite video, use a commercially available RCA A/V 
cable. See page 25. 
■For S-Video, use the S-Video cable supplied with your video 
device or order one from Epson. See page 26.
■For RGB video, use the VGA computer cable included with the 
projector. See page 27.
■For component video, you’ll need the optional Epson component 
video cable. See page 28.
After connecting your video device to the projector, you may want to 
connect an audio cable to play sound from your video equipment 
through the projector’s built-in speaker. See page 29 for instructions. 
note
The projector does not 
support TV antenna cable 
F connectors. 
						

							Setting Up the Projector25
Connecting a Composite Video Source
If you’re connecting a composite video device, use a commercially 
available RCA A/V cable. Before starting, make sure the projector and 
your DVD player or other video source are turned off.
1. Connect the yellow RCA plug on one end of the cable to the 
projector’s yellow 
Video jack.
2. Connect the yellow plug on the other end of the cable to the 
video-out port on your video source.
3. To play sound through the projector, follow the instructions 
beginning on page 29.
If you don’t need to make any other connections, you can plug in 
your projector and turn it on. See page 32 for instructions.
If more than one device is connected to the projector, select the 
correct source after projection starts by pressing the 
Source Search 
button on the projector or remote control. See page 34.
Connect yellow RCA 
plug on A/Vcable 
						

							26Setting Up the Projector
Connecting an S-Video Source
If your video source has an S-Video jack, you can use it to project a 
higher quality video image. You’ll need an S-Video cable, which is 
usually provided with your video source, or you can purchase one 
from Epson (part number ELPSV01). See page 14 for ordering 
information.
Before starting, make sure the projector and your DVD player or 
other video source are turned off.
1. Insert one end of the S-Video cable into the projector’s 
S-Video 
port and the other end into the S-Video output port of your video 
source.
2. To play sound through the projector, follow the instructions 
beginning on page 29.
If you don’t need to make any other connections, you can plug in 
your projector and turn it on. See page 32 for instructions.
If more than one device is connected to the projector, select the 
correct source after projection starts by pressing the 
Source Search 
button on the projector or remote control. See page 34.
Connect 
S-Video cable 
						

							Setting Up the Projector27
Connecting an RGB Video Source
Follow these instructions to connect the projector to a video player or 
satellite receiver that has an RGB video output port using the VGA 
computer cable that came with the projector.
Before starting, make sure the projector and your DVD player or 
other video source are turned off.
1. Connect one end of the VGA computer cable to the 
Computer 
(Component Video) 
port on the projector.
2. Connect the other end to the video port on your player.
3. To play sound through the projector, follow the instructions 
beginning on page 29.
If you don’t need to make any other connections, you can plug in 
your projector and turn it on. See page 32 for instructions.
If more than one device is connected to the projector, select 
Computer as the source after projection starts by pressing the Source 
Search
 button on the projector or remote control. See page 34.
Connect VGA 
computer cable 
						

							28Setting Up the Projector
Connecting a Component Video Source
If your video source has component video connectors, you can use 
them to project a higher quality video image. You’ll need a 
component video cable, which can be purchased from Epson (part 
number ELPKC19). See page 14 for ordering information.
Before starting, make sure the projector and your DVD player or 
other video device are turned off.
1. Connect the large end of the component video cable to the 
projector’s 
Computer (Component Video) port.
2. Insert the three ends of the component video cable into the 
R, G, and B ports on your video source.
3. To play sound through the projector, follow the instructions 
beginning on page 29.
If you don’t need to make any other connections, you can plug in 
your projector and turn it on. See page 32 for instructions.
If more than one device is connected to your projector, select 
Computer (Component Video) as the source by pressing the 
Source Search button on the projector or the remote control. See 
page 34.
Connect component 
video cable 
						

							Setting Up the Projector29
Playing Sound Through the Projector
The projector has a built-in speaker with a maximum output of 1 W. 
You can play sound from your video equipment through the 
projector’s speaker if your video device has an audio output port.
For RCA-Style Audio Output Ports
Most video devices have an RCA-style audio output port. In this case, 
use a commercially available RCA-style audio cable to connect the 
projector to your video source:
1. Connect the red and white plugs on one end of the audio cable to 
the 
L-Audio-R jacks on the projector.
2. Connect the red and white plugs on the other end of the audio 
cable to the corresponding color-coded audio output port on your 
video source.
If you don’t need to make any other connections, you can plug in 
your projector and turn it on. See page 32 for instructions.
Connect audio adapter 
red and white plugs 
						

							30Setting Up the Projector
For Stereo Mini-Jack Audio Output Ports
Some video devices, especially camcorders, may have a stereo 
mini-jack audio output port. In this case, use a commercially available 
audio adapter cable (3.5-mm stereo miniplug to two male RCA plugs) 
to connect to the projector:
1. Connect the red and white plugs on the audio adapter cable to the 
L-Audio-R jacks on the projector.
2. Connect the other end of the audio adapter cable to your video 
device’s audio output port.
If you don’t need to make any other connections, you can plug in 
your projector and turn it on. See page 32 for instructions.
Connect audio adapter 
red and white plugs