Epson Powerlite S5 Multimedia Projector Users Guide

							Welcome11
Save all packaging in case you need to ship the projector. Always use 
the original packaging (or equivalent) when you need to send the 
projector to another location.
Projector Parts
Front
Control panel
Air exhaust 
vent
Front adjustable foot
Foot release leverRemote control 
sensor
Monitor Out port Computer (Component Video) port
S-Video port
Video 
port USB port
Remote 
control sensor
SpeakerAudio 
input ports
Rear adjustable foot Power inlet
A/V mute slide 
Back
Kensington lock port 
(on side of projector) 
						

							12Welcome
Bottom
PowerLite S5 Series Control Panel
PowerLite 77c Control Panel
Air filter
Security lock slot
Hole for 
attaching 
ceiling mount 
bracket Holes for 
attaching 
ceiling mount 
bracket
Lights indicate 
projector statusUp 
button
Enter button automatically 
adjusts computer imageWide and Tele 
buttons adjust 
image size and 
select menu 
items Up and Down buttons 
correct keystone distortion 
and select menu items
Down 
button
Up and Down buttons 
correct keystone distortion 
and select menu itemsUp 
button
Down 
button Enter button automatically 
adjusts computer image
  and  
buttons adjust 
volume and 
select menu 
items 
Lights indicate 
projector status 
						

							Welcome13
Additional Components
Depending on how you plan to use the projector, you may need 
additional components:
■To receive an S-Video signal, you need an S-Video cable. One is 
usually provided with your video device, or you can purchase it 
from Epson. See page 14.
■To receive a component video signal from a VCR or other video 
device, you need a D-sub, 15-pin, VGA-to-component video 
cable, which is available from Epson. See page 14.
■Some older PowerBooks and Macintosh desktop models may 
need a Macintosh video adapter; see your computer dealer. Older 
iMac systems may need a special adapter to provide a VGA output 
port; see your computer dealer.
■To receive an audio signal, you need a commercially available 
audio adapter cable; see your computer or electronics dealer.
■To use the projector’s remote control to change presentation 
slides, you need a USB cable; see your computer or electronics 
dealer. 
						

							14Welcome
Optional Accessories
To enhance your use of the projector, Epson provides the following 
optional accessories:  
You can purchase screens, carrying cases, or other accessories from an 
Epson authorized reseller. To find the nearest reseller, call 
800-GO-EPSON (800-463-7766). Or you can purchase online at 
www.epsonstore.com (U.S. sales) or www.epson.ca (Canadian sales).
Product Product number
Replacement lamp VI3H010L41
Air filter set (includes 2 filters) V13H134A13
Wheeled soft case for projector and laptop ELPKS35-S
Soft shoulder case with laptop compartment ELPKS43
Component video cable
S-Video cableELPKC19
ELPSV01
Distribution amplifier ELPDA01
Duet
™ portable projector screen
50-inch portable screen
60-inch portable pop-up screen
80-inch portable pop-up screen
83.6-inch hanging pull-down screenELPSC80
ELPSC06
ELPSC07
ELPSC08
ELPSC09
ELPDC05 high resolution document imager V12H162020
Kensington
® security lock ELPSL01
Ceiling mount (gyro lock with suspension adapter)
False ceiling plate
Suspension adapter
Security bracket/cabling for gyro lock mounts
Adjustable ceiling channelELPMBUNI
ELPMBFCP
ELPMBAPL
ELPMBSEC
ELPMBACC
note
To purchase a replacement 
remote control, call 
(562) 276-4394 (U.S.) or 
(905) 709-3839 (for dealer 
referral in Canada).  
						

							15
1
Setting Up the Projector
This chapter tells you how to set up the projector and connect it to a 
computer or video source. You can connect up to three devices 
simultaneously: three video sources, or one computer and two video 
sources. 
You’ll find instructions for the following in this chapter:
■Positioning the projector
■Connecting to a computer
■Connecting to video sources 
						

							16Setting Up the Projector
Positioning the Projector
Before connecting the projector, you 
need to decide where to place it. If 
you’re setting up the projector yourself 
and it isn’t already installed in the 
room you’re using, you’ll probably 
want to place it on a table in front of 
the screen, as shown. 
This lets you stand in the front of the room, face the audience, and 
remain close enough to the equipment to be able to control it. Try to 
leave as much space as possible between the projector and the screen to 
get a good-size image. 
Place the projector somewhere between 3 and 30 feet from the screen. 
Use the figure below to help you determine exactly how far. Image size 
increases with distance, but can vary depending on how you’ve 
adjusted the optical zoom and other settings.
PowerLite S5 Series
PowerLite 77c
29.4 feet
5.8 to 8.6 feet2.9 to 4.2 feet
28.4 to 34.2 feet
5.6 to 7.3 feet2.7 to 3.6 feet 
						

							Setting Up the Projector17
Also keep these considerations in mind: 
■Place the projector on a sturdy, level surface.
■Make sure there is plenty of space for ventilation around and 
under the projector. Do not set the projector on top of loose 
papers that could block the vents under the projector. 
■Make sure the projector is within 6 feet (2 m) of a grounded 
electrical outlet or extension cord. 
Try to place the projector directly in front of the center of the screen, 
facing it toward the screen squarely. If the projector isn’t positioned 
this way, the image will be “keystone” shaped, instead of square or 
rectangular.
If you place the projector below the level of the screen, you’ll have to 
tilt it up by extending the front adjustable foot, as described on 
page 39. This also causes the image to lose its rectangular shape. You 
can adjust the shape using the buttons on the projector (see page 39), 
or using the projector’s menu system (see page 61). 
On the PowerLite 77c, the Auto Keystone feature corrects the 
distortion automatically. See page62 for more information about 
Auto Keystone correction. If necessary, you can adjust the image 
shape manually as described on page 39. 
Other Installations
You can also project from behind the screen or from the ceiling, with 
the projector mounted upside-down: 
note
You can download the 
Projection Distance 
Calculator program from 
the Drivers and Downloads 
section of Epson’s web site: 
epson.com/support 
note
The Auto Keystone feature 
corrects vertical distortion 
automatically (PowerLite 
77c only). For more 
information, see page 39.
Front/ceiling projection Rear projection (using a 
translucent screen)Rear/ceiling projection (using 
a translucent screen) 
						

							18Setting Up the ProjectorTo project from overhead, you’ll need the optional ceiling mount 
hardware. (See page 14 for ordering information.) You’ll also need to 
select 
Front/Ceiling or Rear/Ceiling for the Projection option in the 
Extended menu. To project from the rear, select 
Rear. See page 63 for 
more information.
Connecting to a Computer
You can connect the PowerLite projector to any computer that has a 
standard VGA or BNC monitor port, including PC notebook and 
laptop computers, Macintosh PowerBooks and iBooks, and hand-held 
devices. 
Follow the instructions in this section to:
■Connect the projector to your computer with the VGA cable 
included with the projector.
■Connect the projector to your computer with a commercially 
available VGA–5BNC cable.
After connecting the projector to your computer, you may also 
want to:
■Connect a USB cable to your projector so that you can use the 
remote control as a wireless mouse; see page 21
■Connect a monitor to the projector so you can view your 
presentation close-up as well as on-screen (not necessary if you’re 
using a laptop); see page 22
■Connect the projector to your computer with a commercially 
available audio cable to play computer audio; see page 23.
note
If you have an iBook with an 
RCA video-out port, follow 
the instructions for 
connecting to a video device 
on page 25. 
						

							Setting Up the Projector19
Connecting with the VGA Cable
Follow these instructions to connect to your computer with the VGA 
cable that came with your projector. Before you start, make sure your 
computer and the projector are turned off.
1. If you are connecting the projector to a desktop computer, 
disconnect the monitor cable from your computer.
2. Locate the VGA computer cable that 
came with the projector.
Connect one end of the cable to the 
projector’s 
Computer (Component 
Video) 
port.
3. Connect the other end of the cable to your computer’s video-out 
or monitor port. 
If you’re using a PowerBook or iBook and you can’t connect the 
cable, you may need to use an optional Macintosh video adapter; 
see your computer dealer.
4. If you want to view the display simultaneously on your computer 
monitor and the projector screen, see “Connecting an External 
Monitor” on page 22.
5. Tighten the screws on the connectors.
If you don’t need to make any other connections, you can plug in 
your projector and turn it on. See page 32 for instructions.
If more than one device is connected to the projector, select the 
correct source after projection starts by pressing the 
Source Search 
button on the projector or remote control. See page 34.
VGA computer cable
Connect VGA 
computer cable 
						

							20Setting Up the Projector
Connecting with a VGA-5BNC Cable
If your computer provides video output through BNC connectors, 
follow these instructions to connect the projector to your computer 
with an optional VGA-5BNC cable. Before you start, make sure your 
computer and the projector are turned off.
1. Disconnect the monitor cable from your computer.
2. Connect the cable’s VGA connector to the projector’s 
Computer 
(Component Video) 
port. 
3. Connect the BNC connectors to your computer’s BNC ports. 
4. If you want to view the display simultaneously on your computer 
monitor and the projector screen, see “Connecting an External 
Monitor” on page 22.
5. Tighten the screws on the VGA connector.
If you don’t need to make any other connections, you can plug in 
your projector and turn it on. See page 32 for instructions.
If more than one device is connected to the projector, select the 
correct source after projection starts by pressing the 
Source Search 
button on the projector or remote control. See page 34.
VGA-5BNC cable
Connect VGA-5BNC 
computer cable