Epson Powerlite S1+ Users Guide

31
Functions for Enhancing Projection Projecting in widescreen (changing aspect ratio)This function changes the Aspect ratio
g of images from 4:3 to 16:9 when 
component video images (YCbCr and YPbPr) or video images (S-Video or 
composite video) are being projected. Images which have been recorded in 
digital video or onto DVDs can be viewed in 16:9 wide-screen format.
Press the [Aspect] button on the remote control 
to change the screen size as follows:
E-ZoomThe image is enlarged or reduced.
1Press...

32
Configuration Menus Configuration MenusVarious adjustments and settings can be made within the configuration menus. Depending on your video source, some settings may not be available. ImagerrColor Mode ImagerrColor Mode
(Computer Images)(Video Images)
rPicture QualityrrBrightnessrPicture QualityrrBrigtness
rContrastrContrast
rSharpnessrSaturation
rTrackingrTint
rSync.rColor Temperature
rColor TemperaturerSharpness
rAuto SetuprInput Signal
rInput Signal 
(Component video only)
rResetrReset...

33
Configuration Menus Menu operation
1Press the [Menu] button 
The top configuration menu is displayed.2Press the [u] or [d] buttons to select the Top Menu item.
Top MenuSub Menu 1 

34
Configuration Menus 
3Press the [e] button.
Sub Menu 1 is displayed.
4Press the [u] or [d] buttons to select the Sub Menu 1 items, then 
press the [e] button.
5For Sub Menu 2, press the [u] or [d] buttons in the same way, 
then press the [e] button.6Settings can be changed in the following ways:
(a) Press the [l] or [r] buttons to change the setting values.
(b) Press the [u] or [d] buttons to select the menu item.
Then press the [e] button.
 (Green): Item currently set.
 (Orange): Item currently...

35
Configuration Menus 
(c) Press the [l] or [r] buttons to select the value. 
Then, press the [e] button.
(d) Press the [u] [d] [l] [r] buttons to move the image display 
position.
7Set other items in the same way.
Press the [Esc] button to return to the previous item or menu, or select 
“Return.”
8Press the [Menu] button to finish. 

36
Configuration Menus Function listImage menu•When no signal is being input, only the settings for “Auto Setup” and “Input Signal” can be adjusted.
•The functions in the “Image” Menu will be different according to the type of signal which is being input.
“Input Signal” only appears on menu screens when component video images 
are being projected.
Computer images
Video images 

37
Configuration Menus 
Sub menu
Function
Color Mode Corrects the vividness of the image color. The settings can be saved separately for each type of source 
(computer or video).
Select from 5 different quality settings depending on the type of scene.
◗Dynamic:
Images are modulated and made crisper to emphasize brightness.
◗Presentation:
Brightness is emphasized. For presentations in bright rooms.
◗Theatre:
Best for watching movies in their natural tones.
◗Living Room:
Brightness is emphasized. Ideal for...

38
Configuration Menus 
Picture 
QualitySync.
g
(Computer images 
only)Adjusts the image when flickering, fuzziness or interference occur in the image.
Flickering and fuzziness may also occur when the brightness, contrast, sharpness or keystone correction 
settings are adjusted.
Best results can be obtained by adjusting the tracking before the sync.
Color Temperature
gAdjusts bright colors from a reddish tinge to a bluish tinge.
Lower color temperature settings produce redder colors and softer color...

39
Configuration Menus Setting menu
Sub menu
Function
Screen Keystone Corrects vertical keystone distortion in the image.
The projected image changes when keystone correction is carried out.
If the images become uneven in appearance after keystone correction has been carried out, decrease the 
sharpness setting.
Position Moves the image display position vertically and horizontally.
Press the [e] button and adjust the display area on the Position adjustment screen which is displayed. 
Projection Front...

40
Configuration Menus 
Display  Message When set to “off,” messages such as “No signal,” and the name of the selected input source or color mode 
will no longer be displayed. Warning messages such as “Replace the lamp” will continue to be displayed.
Background Color Sets the background color to black or blue.
Startup Screen Sets whether or not the EPSON logo will be displayed during projector startup.
Video Signal Selects the format of the video signal being input.
(Changes in signal format will only be...