Epson Powerlite Pro Z8000wunl Users Guide

Functions for Enhancing Projection
41
Setting the Auto Iris
By automatically setting the luminance according to the brightness of the 
displayed image, it lets you enjoy deep and rich images.
ProcedureA
Press the [Menu] button, and select Image - Auto Iris from 
the configuration menu. 
B
Select On.
The setting is stored for each Color Mode.
C
Press the [Menu] button to close the configuration menu.
Auto Iris can be set only when the Color Mode is Dynamic, The-
atre, or Customized.
When Multi-screen is...

Functions for Enhancing Projection
42
Freezing the Image (Freeze)
When the moving image on the screen is frozen, the image continues to 
project like a still photo. Also, you can perform operations such as 
changing between files during presentations from a computer without 
projecting any images if the freeze function is activated beforehand.
Procedure
Each time you press the button, Freeze turns on or off.
The image source continues to play back the moving images even while 
Freeze is on, and so it is...

Functions for Enhancing Projection
43
Changing the Aspect for video equipment images
Each time the button is pressed, the aspect changes in the order Normal, 
16:9, Full, Zoom, and Native.
1Normal
2 16:9
3Full
4Zoom
5Native 

Functions for Enhancing Projection
44
Changing the Aspect for computer images
You can change the aspect of projected images input from the Computer, DVI-D, or HDMI input port as follows. This projector offers WUXGA 
1920x1200 resolution (Aspect Ratio 16:10). When projecting onto 16:9 screens, set the Aspect to 16:9.
If parts of the image are missing or the image is not projected properly, set Wide or Normal in Resolution from the configuration menu depending on the 
size of the computer screen. 
Set...

Functions for Enhancing Projection
45
FullProject at full size. When a 1024x768 signal is input
ZoomProjects the input image enlarged to the full 
lateral direction size as the aspect ratio remains. 
Parts that extend beyond the projection size are 
not projected.When a 1024x768 signal is input
NativeProjects at the resolution of the input image size 
to the center of the screen. This is ideal for 
projecting clear images.
If the image resolution exceeds 1920x1200, the 
edges of the image are not...

Functions for Enhancing Projection
46
Pointer Function (Pointer)
This allows you to move a Pointer icon on the projected image, and helps 
you draw attention to the area you are talking about.
ProcedureA
Display the Pointer.
Each time you press the button, the pointer appears or disappears.
B
Move the Pointer icon ( ).
You can choose from three different kinds of Pointer icon ( ,  , 
or ) in Settings - Pointer Shape from the configuration menu.
Remote Control
Remote Control 

Functions for Enhancing Projection
47
Enlarging Part of the Image (E-Zoom)
This is useful when you want to expand images to see them in greater 
detail, such as graphs and tables.
ProcedureA
Start E-Zoom. 
B
Move the  ( ) to the area of the image that you want to 
enlarge. 
C
Enlarge. 
Each time the button is pressed, the area is expanded. You can ex-
pand quickly by holding the button down.
You can reduce the enlarged image by pressing the [x] button.
Press the [Esc] button to cancel. 
The enlargement...

Limitation of the Number of the Target Projectors when Using Multiple Projectors
48
Limitation of the Number of the Target Projectors when Using Multiple Projectors
When an ID is set for the projector and the remote control, you can use 
the remote control to operate only the projector with a matching ID. This 
is very useful when managing multiple projectors.
You can set an ID for the projector within a range of "1" to "9". The 
default value is Off.
You can set an ID for the remote...

Limitation of the Number of the Target Projectors when Using Multiple Projectors
49
Setting the Projector ID
ProcedureA
During projection, press the Menu button and select 
Extended - "Projector ID" from the configuration menu. 
B
Choose the ID you want to set and press the Enter button.
C
Press the [Menu] button to close the configuration menu.
Checking the Projector ID
Use the following procedure to check the projector ID.
ProcedureA
Set the remote control ID switch to On.
B
During projection,...

Limitation of the Number of the Target Projectors when Using Multiple Projectors
50
Setting the Remote Control ID
ProcedureA
Set the remote control ID switch to On.
B
While holding the [ID] button, press a number button to 
select a number to match the ID of the projector you want to 
operate.
Once this setting has been made, the projector that can be operated by 
the remote control is limited.The remote control ID setting is saved in the remote control. Even if the 
remote control batteries are removed...