Epson Powerlite Pro Z8000wunl Users Guide
Here you can view all the pages of manual Epson Powerlite Pro Z8000wunl Users Guide. The Epson manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 31
![Page 31
Adjusting the Image
31
Focusing the Image
ProcedureA
Press the [Focus] button on the remote control or press the
[Lens] button on the back of the projector until "Adjust
Focus" is displayed on the screen.
B
To adjust the focus, use the [
h
] button on the remote control
or the arrow buttons on the back of the projector as shown
below.
C
When you’re done, press the [Esc] button on the remote
control or on the back of the projector.
Zooming the Image
ProcedureA
Press the [Zoom] button on the...](http://img.usermanuals.tech/thumb/23/89890/w300_epson-powerlite-pro-z8000wunl-manual_d-30.png "Page 31
Adjusting the Image
31
Focusing the Image
ProcedureA
Press the [Focus] button on the remote control or press the
[Lens] button on the back of the projector until \"Adjust
Focus\" is displayed on the screen.
B
To adjust the focus, use the [
h
] button on the remote control
or the arrow buttons on the back of the projector as shown
below.
C
When you’re done, press the [Esc] button on the remote
control or on the back of the projector.
Zooming the Image
ProcedureA
Press the [Zoom] button on the...")
Adjusting the Image 31 Focusing the Image ProcedureA Press the [Focus] button on the remote control or press the [Lens] button on the back of the projector until "Adjust Focus" is displayed on the screen. B To adjust the focus, use the [ h ] button on the remote control or the arrow buttons on the back of the projector as shown below. C When you’re done, press the [Esc] button on the remote control or on the back of the projector. Zooming the Image ProcedureA Press the [Zoom] button on the...
Page 32
Adjusting the Image 32 Fixing a Tilted Image If you’ve placed your projector on a table in front of the screen and the image is tilted as shown below, you can use the four adjustable feet to correct the tilt.
Page 33
33 Useful Functions This chapter explains useful tips for giving presentations, and the Security functions.
Page 34
Correcting Distortion in the Projected Image 34 Correcting Distortion in the Projected Image There are two ways to correct distortion in projected images. •Quick Corner This allows you to manually correct each of the four corners of the projected image separately. sp.35 We recommend using Quick Corner to accurately adjust keystone distortion. •H/V-Keystone This allows you to manually correct distortion in the horizontal and vertical directions independently. You can perform easy H/V-Keystone...
Page 35
![Page 35
Correcting Distortion in the Projected Image
35
Correcting Distortion with Quick Corner
ProcedureA
Press the Menu button, and then from the configuration
menu select Settings - Keystone.
B
Select "Quick Corner", and then press the [Enter] button.
Press the [Enter] button again to display the selection screen from
which you can select one of the four corners.
Using the Remote Control Using the Control panel](http://img.usermanuals.tech/thumb/23/89890/w300_epson-powerlite-pro-z8000wunl-manual_d-34.png "Page 35
Correcting Distortion in the Projected Image
35
Correcting Distortion with Quick Corner
ProcedureA
Press the Menu button, and then from the configuration
menu select Settings - Keystone.
B
Select \"Quick Corner\", and then press the [Enter] button.
Press the [Enter] button again to display the selection screen from
which you can select one of the four corners.
Using the Remote Control Using the Control panel")
Correcting Distortion in the Projected Image 35 Correcting Distortion with Quick Corner ProcedureA Press the Menu button, and then from the configuration menu select Settings - Keystone. B Select "Quick Corner", and then press the [Enter] button. Press the [Enter] button again to display the selection screen from which you can select one of the four corners. Using the Remote Control Using the Control panel
Page 36
![Page 36
Correcting Distortion in the Projected Image
36
C
Use the [h] button on the remote control or the [w/],
[v/ ], [/ ] buttons on the control panel to
select the corner you want to adjust, and then press the
[Enter] button.
D
To adjust the shape, use the [h] button on the remote
control or the [w/ ], [v/ ], [/ ] buttons on
the control panel. When you finish adjusting the corner,
press [Esc] or [Enter].
If the triangle in the direction you are adjusting the shape turns
gray, as shown in the screen...](http://img.usermanuals.tech/thumb/23/89890/w300_epson-powerlite-pro-z8000wunl-manual_d-35.png "Page 36
Correcting Distortion in the Projected Image
36
C
Use the [h] button on the remote control or the [w/],
[v/ ], [/ ] buttons on the control panel to
select the corner you want to adjust, and then press the
[Enter] button.
D
To adjust the shape, use the [h] button on the remote
control or the [w/ ], [v/ ], [/ ] buttons on
the control panel. When you finish adjusting the corner,
press [Esc] or [Enter].
If the triangle in the direction you are adjusting the shape turns
gray, as shown in the screen...")
Correcting Distortion in the Projected Image 36 C Use the [h] button on the remote control or the [w/], [v/ ], [/ ] buttons on the control panel to select the corner you want to adjust, and then press the [Enter] button. D To adjust the shape, use the [h] button on the remote control or the [w/ ], [v/ ], [/ ] buttons on the control panel. When you finish adjusting the corner, press [Esc] or [Enter]. If the triangle in the direction you are adjusting the shape turns gray, as shown in the screen...
Page 37
![Page 37
Correcting Distortion in the Projected Image
37
E
Repeat steps 3 and 4 as needed to adjust any remaining
corners.
F
When you are done, press the [Esc] button to exit the
correction menu.
Because the correction method was changed to Quick Corner from
Keystone in the configuration menu, when [w/], [v/],
[/ ] buttons are pressed later, the screen for select-
ing the corner in procedure 2 is displayed. Change Keystone from
the configuration menu to H/V-Keystone if you want to correct
H/V-Keystone when...](http://img.usermanuals.tech/thumb/23/89890/w300_epson-powerlite-pro-z8000wunl-manual_d-36.png "Page 37
Correcting Distortion in the Projected Image
37
E
Repeat steps 3 and 4 as needed to adjust any remaining
corners.
F
When you are done, press the [Esc] button to exit the
correction menu.
Because the correction method was changed to Quick Corner from
Keystone in the configuration menu, when [w/], [v/],
[/ ] buttons are pressed later, the screen for select-
ing the corner in procedure 2 is displayed. Change Keystone from
the configuration menu to H/V-Keystone if you want to correct
H/V-Keystone when...")
Correcting Distortion in the Projected Image 37 E Repeat steps 3 and 4 as needed to adjust any remaining corners. F When you are done, press the [Esc] button to exit the correction menu. Because the correction method was changed to Quick Corner from Keystone in the configuration menu, when [w/], [v/], [/ ] buttons are pressed later, the screen for select- ing the corner in procedure 2 is displayed. Change Keystone from the configuration menu to H/V-Keystone if you want to correct H/V-Keystone when...
Page 38
Changing the Projected Image 38 Changing the Projected Image You can change the projected image in the following two ways. •Changing by Source Search The projector automatically detects signals being input from connected equipment, and the image being input from the equipment is projected. •Changing directly to the target image You can use the remote control buttons to change to the target input port. Automatically Detect Input Signal and Change the Projected Image (Source Search) You can project the...
Page 39
![Page 39
Changing the Projected Image
39
Procedure
When your video equipment is connected, start playback before
beginning this operation.
When two or more pieces of equipment are connected, press the [Source
Search] button until the target image is projected.
The following screen showing the status of image signals is displayed
when only the image that the projector is currently displaying is
available, or when no image signal can be found. You can select the input
port where the equipment you want to use...](http://img.usermanuals.tech/thumb/23/89890/w300_epson-powerlite-pro-z8000wunl-manual_d-38.png "Page 39
Changing the Projected Image
39
Procedure
When your video equipment is connected, start playback before
beginning this operation.
When two or more pieces of equipment are connected, press the [Source
Search] button until the target image is projected.
The following screen showing the status of image signals is displayed
when only the image that the projector is currently displaying is
available, or when no image signal can be found. You can select the input
port where the equipment you want to use...")
Changing the Projected Image 39 Procedure When your video equipment is connected, start playback before beginning this operation. When two or more pieces of equipment are connected, press the [Source Search] button until the target image is projected. The following screen showing the status of image signals is displayed when only the image that the projector is currently displaying is available, or when no image signal can be found. You can select the input port where the equipment you want to use...
Page 40
Functions for Enhancing Projection 40 Functions for Enhancing ProjectionSelecting the Projection Quality (Selecting Color Mode) You can easily obtain the optimum image quality simply by selecting the setting that best corresponds to your surroundings when projecting. The brightness of the image varies depending on the mode selected. * The Epson Cinema Filter deploys automatically when Theatre or sRGB is selected. Procedure The Color Mode name is displayed on the screen by pressing the button. If you...