Epson Powerlite Pro Z8000wunl Users Guide

Cleaning
101
B
Remove the air filter cover.
Grip the air filter cover tab between your fingers, and pull up and 
remove the cover while pressing the tab.
C
Remove the air filter.
D
With the front (the side with tabs) of the air filter facing 
down, tap the air filter four or five times to shake off the 
dust.
Turn it over and tap the other side in the same way.
Caution:
If the air filter is hit too hard, it may become unusable due to deformities and cracks. 

Cleaning
102
E
Remove any dust remaining on the air filter by using a 
vacuum cleaner on the front side.
F
Reinsert the air filter.
G
Reinsert the air filter cover.
Press the cover until it clicks into place.
If a message is frequently displayed, even after cleaning, it is time to 
replace the air filter. Replace it with a new air filter. sp.107 

Replacing Consumables
103
Replacing Consumables
This section explains how to replace the Remote Control batteries, the 
lamp, and the air filter. 
Replacing the Remote Control Batteries
If delays in the responsiveness of the Remote Control occur or if it does 
not operate after it has been used for some time, it probably means that 
the batteries are becoming drained. When this happens, replace them 
with two new AA size alkaline batteries. sp.136
Caution:
Make sure you read the Safety Instructions...

Replacing Consumables
104
Replacing the LampLamp replacement period
It is time to replace the lamp when: 
•The message "Replace the lamp." is displayed at the lower left of the 
projection screen when you start projecting.
•The lamp indicator flashes orange.
Replace the lamp indicated by the flashing indicator, either lamp 1 or 2.
•The projected image gets darker or starts to deteriorate.Caution:
•The lamp replacement message is set to appear after the following time periods in 
order to maintain...

Replacing Consumables
105
Warning:
Wait until the lamps have cooled down sufficiently before removing the lamp cover. If 
the lamp is still hot, burns or other injuries may result. It takes about one hour after 
the power has been turned off for the lamp to be cool enough. Caution:•Never use the projector unless there are two lamps installed.
•We recommend replacing both lamps together to maintain consistent hue and 
brightness of projected images.
ProcedureA
Press the [
t
] power button on the remote...

Replacing Consumables
106
D
Install the new lamp. 
Insert the new lamp along the guide rail in the correct direction so 
that it fits in place, push down firmly until it is fully inserted, and 
pull down the lock lever until it clicks into place.
E
Reinstall the lamp cover. 
Press the cover against the unit and slide it to the right until it clicks.
Caution:
•Make sure you install the lamp securely. If the lamp cover is removed, the lamp 
turns off automatically as a safety precaution. If the lamp or the...

Replacing Consumables
107
Select Yes, and then press the [Enter] button.
Replacing the Air FilterAir filter replacement period
It is time to replace the air filter when: 
•The air filter has turned brown.
•The message is displayed even though the air filter has been cleaned.
How to replace the air filter
The air filter can be replaced even when the projector is suspended from 
a ceiling. Procedure
A
Press the [
t
] power button on the remote control or the 
back of the projector to turn off the...

Replacing Consumables
108
C
Remove the air filter.
D
Install the new air filter.
E
Reinsert the air filter cover.
Press until it clicks into place.
Caution:
The air filter contains Polypropylene. Dispose of used air filters properly in accordance 
with your local regulations. 

Optional Accessories and Consumables
109
Optional Accessories and ConsumablesOptional accessories
The following optional accessories and consumables are available.
Consumables
Product
Part Number
Standard zoom lens (ELPLS04)
V12H004S04
Long throw zoom lens (ELPLL07)
V12H004L07
Middle throw zoom lens 1 (ELPLM06)
V12H004M06
Middle throw zoom lens 2 (ELPLM07)
V12H004M07
Rear projection wide lens (ELPLR04)
V12H004R04
Wide zoom lens (ELPLW04)
V12H004W04
Flush Ceiling Mount Bracket
V12H003B25
Mount Bracket...

Notes on Transportation
110
Notes on Transportation
There are many glass parts and precision components inside the 
projector. To prevent damage due to impacts when transporting, handle 
the projector as follows.
Moving Nearby
Do the following, and then carry carefully by the handles.
•Turn off the power to the projector and disconnect all cables.
•Attach the lens cover to the lens.
•Store the foot.
Warning:
Do not carry the projector by yourself. Two people are needed to unpack or carry the 
projector....