Epson Powerlite Pro G5150nl Multimedia Projector Users Guide

							Preparing the Projector to Present Through a Network61
5. Press the  pointer button to select individual letters; then press 
Enter to input a character. To add a blank space or to navigate 
backward and forward through the input text, highlight the 
arrows and press 
Enter. To toggle symbol settings or capital 
letters, highlight the option and press 
Enter. When you’re done, 
highlight 
Finish and press Enter.
6. If you want to create a password for remote access to the 
projector, highlight 
Web Control Password, press Enter, and 
enter a password of up to 8 alphanumeric characters. When you’re 
done, highlight 
Finish and press Enter.
7. If you want to set up a security keyword so that only people who 
are in the same room as the projector can access it, turn on 
Projector keyword. When you connect to the projector, a 
randomized four-digit number or “keyword” is displayed on the 
screen. When prompted by NS Connection, enter the keyword 
on your computer to connect to the projector. 
8. If you want to prevent others from overwriting or deleting files on 
an SD card without permission, enter a password of up to 16 
characters for the 
Network Drive Password.
9. When you’re done making these settings, select 
Return, Setup 
complete
, and then Yes to confirm that you want to save the 
changes.
10. Press 
Menu to exit. 
note
You can interrupt projection 
even when a keyword is 
used. Press the 
Esc button 
on the remote control and 
select the Close option. 
						

							62Preparing the Projector to Present Through a Network
Configuring a Wireless Connection
If you have installed the optional wireless LAN module (G5150NL 
and G5350NL only), you can use NS Connection to connect to the 
projector and send images wirelessly in two modes: Ad Hoc mode or 
Access Point mode. 
■Ad Hoc mode (computer-to-computer mode) lets you connect 
just one computer to the projector at a time; it’s easy to set up, 
and the only equipment you need is a computer with a wireless 
(802.11g, 802.11b, or 802.11a) network card or adapter, or a 
Macintosh
® with an AirPort® or AirPort Extreme card. When 
you connect to the projector in this mode, you cannot connect to 
other wireless networks or devices; you can connect to the 
projector only. 
■Access Point mode (infrastructure mode) lets multiple computers 
access the projector at the same time and easily trade off control 
over the projector. To use Access Point mode, you need a wireless 
(802.11a, 802.11b, or 802.11g) access point or an AirPort 
Extreme (or AirPort) base station, and one or more computers 
with wireless network cards or adapters. 
Follow the instructions below for the mode you want to use. 
Using Ad Hoc Mode 
To use Ad Hoc (computer-to-computer) mode, adjust your projector 
and wireless card or adapter settings as described in this section. 
Configuring the Projector
1. Press the Menu button, then choose Network and press Enter. 
2. Choose 
Network Configuration and press Enter. 
3. Choose 
Wireless LAN and press Enter. 
note
Make sure you’ve installed 
the NS Connection software 
as described in the EasyMP 
Operation Guide.
To connect to the projector 
over a wireless network, your 
computer must be running 
Windows 2000, XP, or 
Vista. Your Mac
® must be 
running Mac OS X 10.3 or 
later. See the EasyMP 
Operation Guide for 
complete system 
requirements for projecting 
wirelessly.
Access Point mode 
(infrastructure mode) is 
required to achieve transfer 
speeds up to 54MB/sec on an 
802.11g network. Ad Hoc 
mode (computer-to-
computer mode) limits 
network connections to 
11MB/sec. This is a 
standard specification of 
802.11g networking.  
						

							Preparing the Projector to Present Through a Network63
You see this screen:
4. Make sure 
Quick is selected for the Connection mode. If not, use 
the  pointer button on the remote control to highlight 
Quick, 
then press 
Enter to select it. 
5. If your network is using 802.11a, use the  pointer button on 
the remote control to highlight 
802.11a, then press Enter to 
select it. 
6. If your computer’s network card supports an SSID (or ESSID) 
name (see page 67), highlight the 
SSID text box, press Enter, and 
enter a name. 
Press the  pointer button to select individual letters; then press 
Enter to input a character. To add a blank space or to navigate 
backward and forward through the input text, highlight the 
arrows and press 
Enter. To toggle symbol settings or capital 
letters, highlight the option and press 
Enter. When you’re done, 
highlight 
Finish and press Enter.
note
If you are using a 
WPS-compatible access 
point, see page 79 for 
connection information. 
						

							64Preparing the Projector to Present Through a NetworkNote that the SSID is case-sensitive (if you enter the name in 
uppercase on the projector, you must type it the same way on the 
computer connecting to the projector). 
7. If you want to prevent the SSID from being displayed on the 
standby screen, set the 
SSID Display option to Off.
8. To prevent the IP address from appearing on the standby screen, 
set the 
IP Address Display setting to Off.
9. When you’re done making these settings, select 
Return, Setup 
complete
, and then Yes to confirm that you want to save the 
changes.
10. Press 
Menu to exit.
Now you’re ready to set up your computer to project wirelessly. Go to 
“Configuring the Network Settings for Windows” on page 65, or 
“Setting Up Your Mac for Ad Hoc Mode” on page 67. 
						

							Preparing the Projector to Present Through a Network65
Configuring the Network Settings for Windows
Before connecting to the projector, you need to make sure the settings 
for your notebook’s or PC’s network card match the settings you 
entered for the projector. 
1. Access your wireless network Properties window. For example, in 
Windows XP you would click 
Start > Control Panel > Network 
and Internet Connections
. Then click the Network 
Connections
 icon. You see a screen similar to this:
note
On some Windows systems, 
you can right-click 
My Network Places or 
Network Neighborhood 
on the desktop and select 
Properties.
Settings may vary, 
depending on your wireless 
network adapter. See the 
documentation for your 
adapter for more 
information. 
Right-click and select Properties 
						

							66Preparing the Projector to Present Through a Network2. Right-click the 
Wireless Network Connection icon and select 
Properties. You see a screen similar to this:
3. Click the 
Configure button.
4. Click the 
Advanced tab. You see a screen similar to this:
Click here 
						

							Preparing the Projector to Present Through a Network67
5. Check your wireless card or adapter device settings. (Depending 
on the type of card or adapter you’re using, some of the settings 
may be different than those listed here.)
■Set the Network Type to 802.11 Ad Hoc.
■Set the SSID to match the name you assigned to the 
projector’s SSID.
■Make sure Encryption is Disabled. 
6. Click the 
General tab and make sure that your wireless card or 
adapter is enabled. 
7. When you’re done, click 
OK to close the Properties dialog box. 
Now you’re ready to connect to the projector. See “Projecting Over a 
Network” on page 90. 
Setting Up Your Mac for Ad Hoc Mode
Your AirPort software is automatically configured to allow your Mac 
to detect both computer-to-computer (Ad Hoc) and Access Point 
networks. 
Typically, you only need to select your projector’s ESSID from the 
AirPort status menu on the Mac menu bar. If you’re having problems 
detecting the projector, follow these steps:
1. From the Apple pull-down menu, select 
System Preferences. 
2. Double-click the 
Network icon. You see the Network settings 
window.
note
When you connect in Ad 
Hoc mode, your connection 
to other wireless networks or 
devices is broken. If you need 
to remain connected to your 
wireless network, use Access 
Point mode, as described on 
page 69. Also, make sure 
you reconnect to your 
original wireless network 
when you are done using the 
projector.  
						

							68Preparing the Projector to Present Through a Network3. Make sure Location is set to 
Automatic.
4. Select 
Network Port Configurations in the Show pull-down 
menu.
5. Under Port Configurations, select 
AirPort.
6. Click 
Apply Now. Then close the window.
7. Click the AirPort icon on the menu bar at the top of the Mac 
desktop. You see the AirPort status menu:
8. Check to make sure AirPort is turned on.
9. Select your projector’s SSID.
note
If you don’t need the other 
network port configurations, 
disable them by deselecting 
their checkboxes. 
When you connect in Ad 
Hoc mode, your connection 
to other wireless networks or 
devices is broken. If you need 
to remain connected to your 
wireless network, use Access 
Point mode, as described on 
page 69. Also, make sure 
you reconnect to your 
original wireless network 
when you are done using the 
projector. 
Select 
Automatic 
Select Network Port 
Configurations 
Then select AirPort
Choose the SSID 
you assigned to 
the projector 
						

							Preparing the Projector to Present Through a Network69
Using Access Point Mode 
To use Access Point (infrastructure) mode, first adjust your projector 
and wireless access point or AirPort base station settings as described 
in this section. 
Configuring the Projector
1. Press the Menu button, then choose Network and press Enter. 
2. Choose 
Network Configuration and press Enter.
3. Choose 
Wireless LAN and press Enter. You see this screen:
4. Make sure 
Advanced is selected for the Connection mode. If 
not, use the  pointer button on the remote control to highlight 
Advanced, then press Enter to select it. 
5. If your network is using 802.11a, use the  pointer button on 
the remote control to highlight 
802.11a, then press Enter to 
select it. 
6. To enable your computer to find the projector on the network, 
you need to enter the SSID name of your access point or AirPort 
network in the 
SSID text box. (The name of your AirPort 
network may be different from that of your AirPort base station; 
select your base station in the AirPort Admin utility and click 
Configure to check the name of your network.) 
note
If you are using a 
WPS-compatible access 
point, see page 79 for 
connection information. 
						

							70Preparing the Projector to Present Through a NetworkHighlight the 
SSID text box, press Enter, and enter a name as 
follows:
Press the  pointer button to select individual letters; then press 
Enter to input a character. To add a blank space or to navigate 
backward and forward through the input text, highlight the 
arrows and press 
Enter. To toggle symbol settings or capital 
letters, highlight the option and press 
Enter. When you’re done, 
highlight 
Finish and press Enter.
Note that the SSID is case-sensitive (if you enter the name in 
uppercase on the projector, you must type it the same way on the 
computer connecting to the projector).
7. If your access point assigns IP addresses automatically, turn on 
DHCP. Otherwise, turn off DHCP and enter the following 
information: 
■IP address: Enter the IP address you want to assign to the 
projector. It must be formatted like other addresses on the 
network. The last section/octet should be unique. 
■Subnet mask: For example: 255.255.255.000, but this 
depends on how your network is set up.
■Gateway address: Enter the IP address that was assigned to 
the access point or AirPort base station when it was set up.
8. If you want to prevent the SSID from being displayed on the 
standby screen, set the 
SSID Display option to Off.
9. To prevent the IP address from appearing on the standby screen, 
set the 
IP Address Display setting to Off.
note
For specific details about 
your network, please consult 
your network administrator.
If you don’t know your 
gateway or access point 
address, see page 76. If 
you’re using AirPort, start 
the AirPort Admin utility, 
select your base station and 
click 
Configure. Then click 
the 
Network tab to see your 
base station’s IP address.