Epson Powerlite Pro G5150nl Multimedia Projector Users Guide
Have a look at the manual Epson Powerlite Pro G5150nl Multimedia Projector Users Guide online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1734 Epson manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Technical Specifications161 *Analog only ** HDMI onlyiMAC VGA* iMAC SVGA* iMAC XGA* MAC13* MAC16* MAC19* MAC19-60* MAC21*117 95 75 67 75 75 59 75640 × 480 800 × 600 1024 × 768 640 × 480 832 × 624 1024 × 768 1024 × 768 1152 × 870 NTSC NTSC 4:43 PAL N-PAL M-PAL PAL—60 SECAM60 60 50 50 60 60 50— — — — — — — TV525i (480i) TV625i (576i) SDTV525p (480p) SDTV625p (576p) HDTV750p (720p) HDTV750p (720p) HDTV1125i (1080i) HDTV1125i (1080i) HDTV1125p (1080p) HDTV1125p (1080p) HDTV1125p (1080p)**60 50 60 50 60 50 60 50 60 50 24— — — — — — — — — — — Compatible video formats (continued) Mode Refresh Rate (Hz) Resolution
162Technical Specifications PowerLite Pro G5200WNL Compatible video formats Mode Refresh Rate (Hz) Resolution VGA EGA* 70 640 × 350 VGA—60 VESA—72* VESA—75* VESA—85*60 72 75 85640 × 480 640 × 480 640 × 480 640 × 480 SVGA—56* SVGA—60 SVGA—72* SVGA—75* SVGA—85*56 60 72 75 85800 × 600 800 × 600 800 × 600 800 × 600 800 × 600 XGA—60* XGA—70* XGA—75* XGA—85*60 70 75 851024 × 768 1024 × 768 1024 × 768 1024 × 768 SXGA1—70* SXGA1—75* SXGA1—85*70 75 851152 × 864 1152 × 864 1152 × 864 WXGA—60 WXGA—75* WXGA—85*60 75 851280 × 800 1280 × 800 1280 × 800 SXGA2—60 SXGA2—75* SXGA2—85*60 75 851280 × 960 1280 × 960 1280 × 960 SXGA3—60 SXGA3—75* SXGA3—85*60 75 851280 × 1024 1280 × 1024 1280 × 1024 WXGA1—60* WXGA2—60*60 601280 × 768 1360 × 768 WXGA+60** WXGA+75** WXGA+85**60 75 851440 × 900 1440 × 900 1440 × 900 SXGA+60 SXGA+75* SXGA+85*60 75 851400 × 1050 1400 × 1050 1400 × 1050 UXGA—60 60 1600 × 1200 WSXGA+60*,*** 60 1680 × 1050
Technical Specifications163 *Analog only ** HDMI only *** Available only when Wide is selected as the Resolution. iMAC VGA* iMAC SVGA* iMAC XGA* MAC13* MAC16* MAC19* MAC19-60* MAC21*117 95 75 67 75 75 59 75640 × 480 800 × 600 1024 × 768 640 × 480 832 × 624 1024 × 768 1024 × 768 1152 × 870 NTSC NTSC 4:43 PAL N-PAL M-PAL PAL—60 SECAM60 60 50 50 60 60 50— — — — — — — TV525i (480i) TV625i (576i) SDTV525p (480p) SDTV625p (576p) HDTV750p (720p) HDTV750p (720p) HDTV1125i (1080i) HDTV1125i (1080i) HDTV1125p (1080p) HDTV1125p (1080p) HDTV1125p (1080p)**60 50 60 50 60 50 60 50 60 50 24— — — — — — — — — — — Compatible video formats (continued) Mode Refresh Rate (Hz) Resolution
C 165 C Notices This appendix includes safety instructions and other important information about your projector. Important Safety Instructions Follow these safety instructions when setting up and using the projector: ■Do not look into the lens when the projector is on. The bright light can damage your eyes. ■Do not place the projector on an unstable cart, stand, or table. ■Do not operate the projector on its side, or while tilted to one side. Do not tilt the projector forward or back at a greater angle than that specified for vertical keystone correction (see page 157). ■If the projector is mounted on a ceiling, it should be installed by qualified technicians using mounting hardware designed for use with this projector. ■If you use a ceiling mount and apply adhesives to the mount to prevent the screws from loosening, or if you use lubricants or oils on the projector, the projector case may crack and the projector may fall from its ceiling mount. This could cause serious injury to anyone under the mount and could damage the projector. When installing or adjusting a ceiling mount, do not use adhesives to prevent the screws from loosening and do not use oils or lubricants. ■Do not stand on the projector or place heavy objects on it. ■Do not use the projector where it may be exposed to rain, water, or excessive humidity. ■Unplug the projector from the wall outlet before cleaning. Use a dry cloth (or, for stubborn dirt or stains, a moist cloth that has been wrung dry) for cleaning. Do not use liquid or aerosol cleaners. ■Never spill liquid of any kind into the projector. ■Do not use the projector where it may be exposed to excessive dust or smoke.
166Notices ■Never push objects of any kind through the cabinet slots. ■Do not use or store the projector or remote control in a hot location, such as near a heater, in direct sunlight, or in a closed vehicle. ■Do not block the slots and openings in the projector case. They provide ventilation and prevent the projector from overheating. Do not operate the projector on a sofa, rug, or other soft surface, or set it on top of loose papers, which could block vents underneath your projector. If you are setting up the projector near a wall, leave at least 7.9 inches (20 cm) of space between the wall and the air exhaust vent. ■Do not operate the projector in a closed-in cabinet unless proper ventilation is provided. ■If you are using two or more projectors side-by-side, leave at least 2 feet (60 cm) of space between the projectors to allow for proper ventilation. ■You may need to clean the air filter and vent. A clogged air filter or vent can block ventilation needed to cool the projector. ■Do not store the projector outdoors for an extended length of time. ■Do not use the projector outside the required temperature range of 32 to 104 °F (0 to 40 °C). Doing so may cause an unstable display and could lead to projector damage. ■Do not store the projector outside the required temperature range of 14 to 140 °F (–10 to 60 °C) or in direct sunlight for long periods of time. Doing so may cause damage to the case. ■Do not touch the plug during an electrical storm. Otherwise, you may receive an electric shock. ■Unplug the projector when it will not be used for extended periods. ■Unplug the projector from the wall outlet and refer servicing to qualified service personnel under the following conditions: If it does not operate normally when you follow the operating instructions, or exhibits a distinct change in performance; If smoke, strange odors, or strange noises come from the projector; If the power cord or plug is damaged or frayed; If liquid or foreign objects get inside the projector, or if it has been exposed to rain or water; If it has been dropped or the housing has been damaged. ■Except as specifically explained in this User’s Guide, do not attempt to service this product yourself. Refer all servicing to qualified personnel. Opening or removing covers may expose you to dangerous voltages and other hazards. ■Never open any covers on the projector except as specifically explained in this User’s Guide. Never attempt to disassemble or modify the projector. Refer all repairs to qualified service personnel.
Notices167 ■Use the type of power source indicated on the projector. Use of a different power source may result in fire or electric shock. If you are not sure of the power available, consult your dealer or power company. ■If you use the projector in a country other than where you purchased it, use the correct power cord for that country. ■Do not overload wall outlets, extension cords, or power strips. Do not insert the plug into a dusty outlet. This can cause fire or electric shock. ■Take the following precautions when handling the plug: Do not hold the plug with wet hands. Do not insert the plug into an outlet with dust present. Insert the plug firmly into the outlet. Do not pull the power cord when disconnecting the plug; always be sure to hold the plug when disconnecting it. Failure to comply with these precautions could result in fire or electric shock. ■Do not place the projector where the cord can be walked on. ■The lamp(s) in this product contain mercury. Please consult your state and local regulations regarding disposal or recycling. Do not put in the trash. ■Do not place anything that can become warped or damaged by heat near the exhaust vents. Do not bring your hands or face close to the vents while projection is in progress. ■Before you move the projector, make sure its power is turned off, the plug is disconnected from the outlet, and all cables are disconnected. ■Do not project images while the detachable lens cover is still attached. Heat may cause the lens cover to melt, and if you touch the lens cover you could get burned. ■Never try to remove the lamp immediately after use because it will be extremely hot. Before removing the lamp, turn off the power and wait at least an hour to allow the lamp to cool completely. ■Do not place the source of an open flame, such as a lit candle, on or near the projector. ■Do not modify the power cord. Do not place heavy objects on top of the power cord or bend, twist, or pull it excessively. Keep the power cord away from hot electrical appliances. ■If the lamp breaks, ventilate the room to prevent gases contained in the lamp from being inhaled or coming in contact with the eyes or mouth. ■If the projector is mounted overhead and the lamp breaks, be careful to prevent pieces of glass from falling into your eyes when you open the lamp cover.
168Notices WARNING: The cords included with this product contain chemicals, including lead, known to the State of California to cause birth defects or other reproductive harm. Wash hands after handling. (Provided in accordance with Proposition 65 in Cal. Health & Safety Code §25249.5 et seq.) FCC Compliance Statement For United States Users This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio or television reception. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause interference to radio and television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: ■Reorient or relocate the receiving antenna. ■Increase the separation between the equipment and receiver. ■Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. ■Consult the dealer or an experienced radio/TV technician for help. WARNING The connection of a non-shielded equipment interface cable to this equipment will invalidate the FCC Certification of this device and may cause interference levels which exceed the limits established by the FCC for this equipment. It is the responsibility of the user to obtain and use a shielded equipment interface cable with this device. If this equipment has more than one interface connector, do not leave cables connected to unused interfaces. Changes or modifications not expressly approved by the manufacturer could void the user’s authority to operate the equipment.
Notices169 For Canadian Users This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations. Cet appareil numérique de la classe B respecte toutes les exigences du Règlement sur le materiel brouilleur du Canada.