Epson Powerlite Pro Cinema 9350 Users Guide

							Notices71
Notices
Important Safety Information
Follow these safety instructions when setting up and using the projector:
■Never look into the projector lens when the lamp is turned on; the bright light can damage your 
eyes. Never let children look into the lens when it is on.
■Never open any cover on the projector, except the lamp and filter covers. Dangerous electrical 
voltages inside the projector can severely injure you.
■Except as specifically explained in this User’s Guide, do not attempt to service this product 
yourself. Refer all servicing to qualified service personnel.
■The projector and its accessories come packaged in plastic bags. Keep plastic bags away from small 
children to avoid any risk of suffocation.
■Don’t place the projector on an unstable cart, stand, or table. Also, don’t use the projector near 
water or sources of heat.
■Use the type of power source indicated on the projector. If you’re not sure of the power available, 
consult your dealer or power company.
■Place the projector near a wall outlet where the plug can be easily unplugged.
■Don’t insert the plug into an outlet with dust present, and insert the plug firmly into the outlet. 
Failure to do so could result in sparks or fire.
■Don’t overload wall outlets, extension cords, or integral convenience receptacles. This can cause 
fire or electric shock.
■Don’t block the slots and openings in the projector case. They provide ventilation and prevent the 
projector from overheating. Don’t operate the projector on a sofa, rug, or other soft surface, or in a 
closed-in cabinet unless proper ventilation is provided.
■Never push objects through the cabinet slots or spill liquid into the projector.
■Unplug the projector from the wall outlet and refer servicing to qualified service personnel under 
the following conditions: when the power cord or plug is damaged or frayed; if liquid has been 
spilled into the projector, or if it has been exposed to rain or water; if it doesn’t operate normally 
when you follow the operating instructions, or if it exhibits a distinct change in performance, 
indicating a need for service; if it has been dropped or the housing has been damaged.
■Don’t place the projector where the cord can be walked on. This may result in fraying or damage 
to the plug.
■Unplug the projector from the wall outlet before cleaning. Use a damp cloth for cleaning. Do not 
use liquid or aerosol cleaners. 
						

							72Notices
■ The lamp(s) in this product contain mercury. Please consult your state and local regulations 
regarding disposal or recycling. Do not put in the trash.
■Allow the lamp to cool for one hour before replacing it.
■Unplug the projector during lightning storms or when not in use for extended periods.
■Don’t place the projector or remote control on top of heat-producing equipment.
■If you use the projector in a country other than where you purchased it, use the correct power cord 
for that country.
■Don’t stand on the projector or place heavy objects on it.
■Don’t use the projector outside of the required temperature range of 41 to 95 °F 
(5 to 35 °C). Doing so may cause an unstable display and could lead to projector damage.
■Don’t store the projector outside of the required temperature range of 14 to 140 °F 
(–10 to 60 °C) or in direct sunlight for long periods of time. Doing so may cause damage 
to the case.
WARNING: The cords included with this product contain chemicals, including lead, known to the 
State of California to cause birth defects or other reproductive harm. Wash hands after handling. (This 
notice is provided in accordance with Proposition 65 in Cal. Health & Safety Code § 25249.5 and 
following.) 
						

							Notices73
FCC Compliance Statement
For United States Users
This equipment has been tested and found to comply with the limits for a Class B digital device, 
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection 
against harmful interference in a residential installation. This equipment generates, uses, and can 
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may 
cause harmful interference to radio or television reception. However, there is no guarantee that 
interference will not occur in a particular installation. If this equipment does cause interference to radio 
and television reception, which can be determined by turning the equipment off and on, the user is 
encouraged to try to correct the interference by one or more of the following measures:
■Reorient or relocate the receiving antenna.
■Increase the separation between the equipment and receiver.
■Connect the equipment into an outlet on a circuit different from that to which the receiver is 
connected.
■Consult the dealer or an experienced radio/TV technician for help.
WARNING
The connection of a non-shielded equipment interface cable to this equipment will invalidate the FCC 
Certification of this device and may cause interference levels which exceed the limits established by the 
FCC for this equipment. It is the responsibility of the user to obtain and use a shielded equipment 
interface cable with this device. If this equipment has more than one interface connector, do not leave 
cables connected to unused interfaces. Changes or modifications not expressly approved by the 
manufacturer could void the user’s authority to operate the equipment.
For Canadian Users
This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment 
Regulations.
Cet appareil numérique de la classe B respecte toutes les exigences du Règlement sur le materiel brouilleur du 
Canada. 
						

							74Notices
Declaration of Conformity
According to 47CFR, Part 2 and 15 for Class B Personal Computers and Peripherals; and/or CPU 
Boards and Power Supplies used with Class B Personal Computers:
We: Epson America, Inc. 
Located at: 3840 Kilroy Airport Way
MS 3-13
Long Beach, CA 90806-2469
Telephone: (562) 290-5254
Declare under sole responsibility that the product identified herein, complies with 47CFR Part 2 and 
15 of the FCC rules as a Class B digital device. Each product marketed is identical to the representative 
unit tested and found to be compliant with the standards. Records maintained continue to reflect the 
equipment being produced can be expected to be within the variation accepted, due to quantity 
production and testing on a statistical basis as required by 47CFR §2.909. Operation is subject to the 
following two conditions: (1) this device may not cause harmful interference, and (2) this device must 
accept any interference received, including interference that may cause undesired operation.
Trade Name: Epson
Type of Product: Projector
Model: H373F/H420A
Marketing Name: PowerLite Pro Cinema 9350/PowerLite Pro Cinema 9700 UB
Epson America, Inc. Limited Warranty
Three-Year Projector Limited Warranty and 90-Day Lamp Limited Warranty
What Is Covered: Epson America, Inc. (‘Epson’) warrants to the original retail purchaser of the Epson 
projector product enclosed with this limited warranty statement that the product, if purchased new and 
operated in the United States, Canada, or Puerto Rico will be free from defects in workmanship and 
materials for a period of three (3) years from the date of original purchase. This limited warranty 
applies only to the projector and not to the projector lamp, which carries a limited warranty period of 
ninety (90) days from the date of original purchase. For warranty service, you must provide proof of the 
date of original purchase.
What Epson Will Do To Correct Problems: If your product requires service during the limited warranty 
period, please call Epson at the number on the bottom of this statement and be prepared to provide the 
model, serial number, and date of original purchase. Epson will, at its option, repair or replace the 
defective unit, without charge for parts or labor. When warranty service involves the exchange of the 
product or of a part, the item replaced becomes Epson property. The exchanged product or part may 
be new or refurbished to the Epson standard of quality, and at Epson’s option, the replacement may be 
another model of like kind and quality. Epson’s liability for replacement of the covered product will 
not exceed the original retail selling price of the covered product. Exchange or replacement products or  
						

							Notices75
parts assume the remaining warranty period of the product covered by this limited warranty. If Epson 
replaces the lamp as part of the warranty service, the replacement lamp carries the limited 90-day 
warranty stated above.
What This Warranty Does Not Cover: This warranty covers only normal use in the United States, 
Canada or Puerto Rico. Twenty-four hours per day or other excessive continual use is not considered 
normal use. This warranty does not cover consumables such as filters. This warranty is not transferable. 
Epson is not responsible for warranty service should the Epson label or logo or the rating label or serial 
number be removed. Epson is not responsible for warranty service should the product fail to be 
properly maintained or fail to function properly as a result of misuse, abuse, improper installation, 
neglect, improper shipping, damage caused by disasters such as fire, flood, and lightning, improper 
electrical current, software problems, interaction with non-Epson products, or service other than by 
Epson or an Epson Authorized Servicer. Postage, insurance, or shipping costs incurred in presenting 
your Epson product for carry-in warranty service are your responsibility. Epson will pay for all freight 
charges if you choose to send your unit to Epson for repair. If a claimed defect cannot be identified or 
reproduced in service, you will be held responsible for costs incurred.
THE WARRANTY AND REMEDY PROVIDED ABOVE ARE EXCLUSIVE AND IN LIEU OF 
ALL OTHER EXPRESS OR IMPLIED WARRANTIES INCLUDING, BUT NOT LIMITED TO, 
THE IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR 
PURPOSE. SOME LAWS DO NOT ALLOW THE EXCLUSION OF IMPLIED WARRANTIES. 
IF THESE LAWS APPLY, THEN ALL EXPRESS AND IMPLIED WARRANTIES ARE LIMITED 
TO THE WARRANTY PERIOD IDENTIFIED ABOVE. UNLESS STATED HEREIN, ANY 
STATEMENTS OR REPRESENTATIONS MADE BY ANY OTHER PERSON OR FIRM ARE 
VOID. IN THE EVENT THE REMEDIES ABOVE FAIL, EPSONS ENTIRE LIABILITY SHALL 
BE LIMITED TO A REFUND OF THE PRICE PAID FOR THE EPSON PRODUCT 
COVERED BY THIS LIMITED WARRANTY. EXCEPT AS PROVIDED IN THIS WRITTEN 
WARRANTY, NEITHER EPSON AMERICA, INC. NOR ITS AFFILIATES SHALL BE LIABLE 
FOR ANY LOSS, INCONVENIENCE, OR DAMAGE, INCLUDING DIRECT, SPECIAL, 
INCIDENTAL, OR CONSEQUENTIAL DAMAGES, RESULTING FROM THE USE OR 
INABILITY TO USE THE EPSON PRODUCT, WHETHER RESULTING FROM BREACH OF 
WARRANTY OR ANY OTHER LEGAL THEORY.
In Canada, warranties include both warranties and conditions.
Some jurisdictions do not allow limitations on how long an implied warranty lasts and some 
jurisdictions do not allow the exclusion or limitation of incidental or consequential damages, so the 
above limitations and exclusions may not apply to you. This warranty gives you specific legal rights, 
and you may also have other rights, which vary from jurisdiction to jurisdiction.
To find the Epson Authorized Reseller nearest you, please visit our website at: www.epson.com.
To find the Epson Customer Care Center nearest you, please visit www.epson.com/support.
To contact the Epson Connection
SM, please call (800) 637-7661 + PIN or (562) 276-4394 in the U.S. 
and (905) 709-3839 in Canada or write to Epson America, Inc., P.O. Box 93012, Long Beach, CA 
90809-3012. 
						

							76Index
Index
Numerics
2-2 Pull-down, 39
4-4 Pull-down, 39
A
Abs. Color Temp. setting, 40
Accessories, 10, 64
Air filter
cleaning and replacing, 51 to 52
ordering, 10
Anamorphic lens, 20, 27
Anamorphic Wide setting, 27
Anti-theft device, 7, 10
Aspect button, 9, 27, 28, 60
Aspect ratio, selecting, 27 to 28, 46
Auto Iris setting, 36
Auto Setup, 42
B
Batteries, remote control, 21
Blank button, 23
Block NR, 39
Blurry picture, 62
Brightness
setting, 36
specification, 65
Buttons
projector, 8
remote control, 9
C
Cables, connecting, 18 to 20
Child Lock, 32, 48Cleaning
air filter, 51 to 52
lens, 50
projector case, 51
Codes, AV controller, 69
Color
adjusting, 29 to 31, 40 to 41
isolating, 40
problems, 62
Color Gamut setting, 42
Color Mode, 9, 28, 62
Color Saturation setting, 40
Color temperature setting, 40
Component setting, 48
Component video connection, 18
Computer
adjusting image, 42
displaying image, 61
Contrast
button, 9
ratio, 65
setting, 36
Contrast Enhancement, 42
Control Panel Lock, 49
Control panel lock, 32
Control panel, projector, 8
D
Declaration of Conformity, 74
Direct Power On, 47
Display Background setting, 47
Documentation, 11 
						

							Index77
E
Electrical requirements, 66
Epson
accessories, 10, 64
Home Service, 10
PrivateLine Support, 11, 64
technical support, 11, 64
warranty, 10, 74 to 75
EPSON Super White setting, 36
ESC/VP21 command codes, 69
F
FCC Compliance Statement, 73
Filter, see Air filter
Flickering, 38, 62
Focus ring, 26
Frame Interpolation, 39
G
Gain, color, 41
Gamma, 29 to 30, 41
Gamma button, 9
H
HDMI, 18, 19, 36 to 37
Help, 64
High Altitude Mode, 49
Home Service, 10
I
Illumination of buttons
projector, 48, 58 to 59
remote control, 21
Illumination setting, 48, 59Image
adjusting, 29 to 31, 35 to 43
changing aspect ratio, 27 to 28
inverting, 16, 47
positioning, 24 to 25, 46
resizing, 27 to 28, 46
selecting source, 23
size, 14 to 15
Image menu, 45
Image problems, 60 to 63
Image Size Calculator, 15
Info menu, 56
Installing projector, 16
Interference, signal, 62
K
Kensington anti-theft device, 7, 10
L
Lamp
checking usage timer, 56
life, 65
ordering, 10, 53
replacing, 53 to 55
resetting usage timer, 56
safety instructions, 71 to 72
specifications, 65
Language setting, 35
Lens shift dials, 13, 24
Lens, cleaning, 50
Lights, projector, 48, 58 to 59
Line menu, 9
Lock
Child Lock, 32, 48
control panel lock, 32
Kensington, 7, 10
projector buttons, 32 
						

							78Index
M
Memory button, 9, 43
Memory settings
creating, 44
renaming, 44
using, 43
Menu button, 9, 33
Menus
available settings, 35 to 49
customizing display, 35
line menu, 9
using, 33 to 35
Message setting, 47
Mosquito NR, 38
Motion Detection, 38
Mounting projector, 16
Moving projector, 57
N
No image, 60 to 61
Noise Reduction, 38
O
Offset, color, 41
Overscan, 46
P
Pattern button, 9, 24, 40
Picture problems, 60 to 63
Pixelworks, 67
Positioning image, 24 to 25, 46
Positioning projector, 12 to 15
Power Consumption setting, 37
PrivateLine Support, 11, 64
Problems
indicator lights, 58 to 59
picture, 60 to 63
remote control, 63
Progressive mode setting, 38Projection distance, 14 to 15, 65
Projector
checking status, 56
cleaning, 51
control panel, 8
dimensions, 17, 66
installing, 16
lights, 48, 58 to 59
locking buttons, 32
menus, 35 to 49
parts, 7 to 8
positioning, 12 to 15
resetting menu options, 45
security lock, 7, 10
storing, 57
transporting, 57
turning on and off, 21 to 22, 60
R
Registration, 10
Remote control
batteries, 21
buttons, 9
lighting up buttons, 21
problems, 63
Replacing lamp, 53 to 55
Resetting
lamp usage timer, 46, 56
projector settings, 45
Resolution
compatible formats, 67 to 68
projector, 56, 65
RGB settings, 41
RGBCMY setting, 29 to 31
RGBCMY settings, 41
S
Safety approvals, 67
Safety instructions, 71 to 72
Setup level, 36
Sharpness, 37
Signal menu, 36 
						

							Index79
Skin Tone
setting, 40
Sleep mode, 48
Source buttons, 8, 9
Source, selecting image, 23
Specifications
compatible video formats, 67 to 68
dimensions, 66
electrical, 66
environmental, 67
general, 65
lamp, 65
remote control, 66
Startup screen, selecting, 47
Static, 62
Storing projector, 57
Super-resolution, 42
Support, 11, 64
S-Video connection, 18
Sync (Synchronization) setting, 42
T
Technical support, 11, 64
Test pattern, 24, 40
THX setting, 28
Tint, 40
Tracking, 42
Transporting projector, 57
Trigger out port, 20, 27
Trigger out setting, 48
Turning on and off projector, 21 to 22, 60
V
Video Signal setting, 48
Video, compatible formats, 67 to 68
VP21 codes, 69
W
Warranty, 10, 74 to 75
Where to Get Help, 64
Wide setting, 27
X
x.v.Color setting, 28
Z
Zoom Caption Pos. setting, 28, 47
Zoom ring, 26
Zoom setting, 27