Epson Powerlite 800p Multimedia Projector Users Guide

Using the Remote Control35
Zooming Your Image 
You can zoom in on a portion of the image using the E-Zoom button 
on the remote control.
1. Press the 
E-Zoom button. 
A crosshair indicating the center of the zoom-in area appears on 
the screen.
2. Use the   button to move the crosshair where you want it.
3. Press the right side of the 
E-Zoom button to enlarge the selected 
area. 

Press the button repeatedly to enlarge it up to four times in 
25 steps.

Press and hold the button to zoom in to the size...

36Using the Remote Control
Displaying Picture-in-Picture Video
You can open a small video window on your computer image, and 
view a video at the same time as your computer presentation. If you’re 
using component video, you can display a second video (from a 
composite or S-video source) in the window.
First make sure you have connected your VCR or other video sources 
as described in Chapter 1. If you’re using S-video, you need to select it 
in the 
P in P menu option as described on page 53.
1. Press...

Using the Remote Control37
Highlighting Your Presentation
You can highlight areas on the screen using the numbered buttons on 
the remote control. You can use these “special effects” features to 
annotate your presentation slides or call attention to your most 
important points. The following three highlighting tools are available:

Pointer or cursor stamp (button 1)

Spotlight (button 2)

Bar (button 3)
You can customize the highlighting tools through the Effect menu. 
See page 50 for instructions....

38Using the Remote Control
Spotlighting Your Image
With the Spotlight tool, you can highlight part of the screen.
1. To activate the spotlight tool, press button 
2 on the remote 
control. A square spotlight appears on the image.
You can continue pressing button 
3 to switch between three 
spotlight sizes. 
2. Use the   button to move the spotlight where you want it.
3. To remove the spotlight, press 
Esc.
You can change the default size of the spotlight using the Effect menu; 
see page 50. 
Using...

Using the Remote Control39
Using the Remote Control as a 
Wireless Mouse
When you use the remote control as a wireless mouse, you can control 
your computer or click through slideshow-style presentations (such as 
PowerPoint) from up to 30 feet away. This gives you more flexibility, 
since you won’t need to stand near your computer to change slides, for 
example. 
To control your computer with the remote, make sure you have 
connected the mouse cable between the projector and your computer 
as described...

40Using the Remote Control

To double-click, press down twice on the left mouse button.

To click and drag, press down on the left mouse button and then 
tilt the   button in the direction you want to drag.
You can use the up and down arrow buttons on the remote control to 
move the cursor or move through a PowerPoint presentation. 

Press the down arrow to move forward through a presentation or 
display the next slide.

Press the up arrow to move backward or display the previous slide.
Power
A/V...

4
Fine-tuning the Projector41
Fine-tuning the Projector 
You can use the projector’s on-screen menus to adjust the image, 
sound, and other features. You can also create your own startup 
screen, customize the highlighting tools, and find out how long your 
lamp has been in use. This chapter covers the following information:

Using the menu system

Adjusting the image 

Adjusting the sound 

Customizing the highlighting controls

Creating your own startup screen

Customizing projector features

Viewing...

42Fine-tuning the Projector
Using the Projector’s Menu System
The eight projector menus let you adjust and customize the projector 
features from either the control panel or remote control:

The Video menu controls the look and quality of the projected 
image. It lets you adjust the image position and fine-tune settings 
such as Brightness, Sharpness, and Contrast.

The Audio menu controls the volume level, treble, and bass 
settings.

The Effect menu lets you change the cursor speed and modify the...

Fine-tuning the Projector43
Changing Menu Settings
You can use the buttons on the control panel or remote control to 
access the menus and change settings. Follow these steps:
1. To display the menu screen, press the 
Menu button on the 
control panel or the remote control. 
You see the menu screen:
The eight menus are listed on the left, and the options available 
for the highlighted menu are shown on the right.
2. Press the   
Sync+ or  Sync– button on the control panel, 
or press up or down on the...

44Fine-tuning the Projector3. When the menu you want is highlighted, press the   button on 
the control panel or the remote control to select it. The highlight 
moves to the first option for that menu. 
4. Use the   
Sync+ or  Sync– button (control panel) or the 
 button (remote control) to scroll through the list of options. (If 
a computer or video source isn’t connected, certain options may 
be unavailable.)
5. Use the   
Tracking– or  Tracking+ button (control panel) or 
the   button (remote control)...