Epson Powerlite 765c Multimedia Projector Users Guide

							Software Installation171
Installing the Software on a Windows 
System
Follow these steps: 
1. Insert the EasyMP CD-ROM in your computer’s CD-ROM or 
DVD drive. You see this screen:
2. Click 
Install, then follow the on-screen instructions to install 
your projector software. 
If you see a message that the Epson GDI Monitor Driver has not 
passed Windows Logo testing, click 
Continue Anyway.
3. When installation is complete, close the installation window.  
						

							172Software Installation
Installing the Software on a Macintosh
Follow these steps to install EMP NS Connection:
1. Insert the EasyMP software CD-ROM in your drive. 
2. If necessary, double-click the 
Epson CD-ROM icon to open its 
window.
3. Double-click the 
Installer for Mac OS X icon. You see this 
screen:
4. Click 
Install, then follow the on-screen instructions to install the 
software. 
5. When installation is complete, close the installation window. 
						

							173
A
Projector Installation
This appendix provides guidelines on installing the projector in a 
permanent location, such as a theater or conference room.
The projector can be installed for four different viewing setups: front 
projection, ceiling mounting, rear projection onto a semi-transparent 
screen, or rear/ceiling projection, as shown: 
To project from overhead, you’ll need the optional ceiling mounting 
hardware; see page 13 for ordering information. You’ll also need to 
select 
Front/Ceiling or Rear/Ceiling as the Projection option of the 
projector’s Extended menu to flip the image upside-down. To project 
from the rear, onto a semi-transparent screen, select 
Rear or 
Rear/Ceiling (see page 120).
Front projectionRear projection
Rear/ceiling projectionCeiling mounting 
						

							174Projector InstallationIf you’re mounting the projector on the ceiling and you place it above 
screen level, you’ll have to tilt the projector down to position the 
image on the screen. This causes the image to lose its square shape. 
You can correct the distortion using the 
Keystone function in the 
projector’s menu system (see page 113).
If you place the projector so that the base of the lens is level with the 
bottom of the screen, the image should be square and you won’t have 
to adjust it. If you place the lens lower than the bottom of the screen, 
you’ll have to tilt the projector upward if you want to fill the whole 
screen with the image.  
						

							175
A
Technical Specifications
General
Type of display Epson poly-silicon TFT active matrix
Resolution
(native format) 1024 × 768 pixels (XGA)
Color reproduction 24 bit, 16.8 million colors
Brightness 2500 lumens (High Brightness mode)
2000 lumens (Low Brightness mode)
Contrast ratio 400:1
Image size 30 to 300 inches
Projection distance 3.2 to 39.7 feet (1.0 to 12.1 meters)
Projection methods Front, rear, upside-down (ceiling mount)
Internal sound system 1 W monaural
Optical aspect ratio 4:3 (horizontal:vertical)
Zoom ratio 1:1.2
Noise level 35 dB in Low Brightness mode, 39 dB in 
High Brightness mode
Keystone correction Automatic (manual adjustment capability 
±30° vertical keystone correction)
Mouse compatibility Supports USB (type B) 
						

							176Technical Specifications
Projection Lamp
Type UHE (Ultra High Efficiency)
Power consumption 170 W
Lamp life Approx. 2000 hours (High Brightness 
mode)
Approx. 3000 hours (Low Brightness mode)
Part number V13H010L32
Remote Control
Range 20 feet (6 meters)
Batteries (2) Alkaline AAA
Dimensions
Height 2.7 inches (70 mm), feet retracted 
Width 10.9 inches (276 mm)
Depth 7.6 inches (193 mm)
Weight 3.9 lb (1.8 kg)
Electrical
Rated frequency 50/60 Hz AC
Power supply 100 to 120 VAC, 2.7 A
200 to 240 VAC, 1.1 A
Power consumption Operating: 240 W 
Environmental
Temperature Operating: 41 to 95 °F (5 to 35 °C)
Storage: 14 to 140 °F (–10 to 60 °C)
Humidity
(non-condensing) Operating: 20 to 80% RH
Storage: 10 to 90% RH 
						

							Technical Specifications177
Safety
United States FCC 47CFR Part 15B Class B (DoC)
UL60950 Third Edition
Canada ICES-003 Class B
CSA C22.2 No. 60950
CE Marking Directive 73/23/EEC
Directive 89/336/EEC
IEC 60950 Third Edition
EN 55022, EN 55024
 Pixelworks
™ DNX™ ICs are used in this projector.
Compatible Video Formats
The projector supports NTSC, PAL, and SECAM international video 
standards, as well as the monitor display formats listed below.
To project images output from a computer, the computer’s video card 
must be set at a refresh rate (vertical frequency) that’s compatible with 
the projector. Some images are automatically resized to display in the 
projector’s “native” format (XGA). The frequencies of some 
computers may not allow images to display correctly; see your 
computer’s documentation for details.
Mode Refresh Rate (Hz) Resolution
VGA EGA 70 640 
× 350*
VGA—60
VESA—72
VESA—75
VESA—8560
72
75
85640 × 480*
640 × 480*
640 × 480*
640 × 480*
SVGA—56
SVGA—60
SVGA—72
SVGA—75
SVGA—8556
60
72
75
85800 × 600*
800 × 600*
800 × 600*
800 × 600*
800 × 600* 
						

							178Technical Specifications
*The image is resized using Epson’s SizeWise™ Technology. 
XGA—60
XGA—70
XGA—75
XGA—8560
70
75
851024 × 768
1024 
× 768
1024 
× 768
1024 
× 768
SXGA1—70
SXGA1—75
SXGA1—8570
75
851152 
× 864*
1152 × 864*
1152 × 864*
SXGA2—60
SXGA2—75
SXGA2—85
SXGA+60
SXGA+75
SXGA+8560
75
85
60
75
851280 × 960*
1280 × 960*
1280 × 960*
1400 × 1050*
1400 × 1050*
1400 × 1050*
SXGA3—60
SXGA3—75
SXGA3—8560
75
851280 × 1024*
1280 × 1024*
1280 × 1024*
UXGA—60 60 1600 × 1200*
iMAC VGA
iMAC SVGA
iMAC XGA
MAC13
MAC16
MAC19
MAC19-60
MAC21117
95
75
67
75
75
59
75640 × 480*
800 × 600*
1024 × 768
640 
× 480*
832 × 624*
1024 × 768
1024 
× 768
1152 
× 870*
NTSC 
NTSC 4:43
PAL
N-PAL
M-PAL
PAL—60
SECAM60
60
50
50
60
60
50—
—
—
—
—
—
—
HDTV (720p)
HDTV (720p)
HDTV (1080i)
HDTV (1080i)60
50
60
50—
—
—
—
TV480i
TV480i
SDTV (480p)
SDTV (480p)60
50
60
50—
—
—
— Mode Refresh Rate (Hz) Resolution 
						

							179
A
Notices
This appendix includes safety instructions and other important information 
about your Epson PowerLite projector.
Important Safety Instructions
Follow these safety instructions when setting up and using the projector:
■Do not place the projector on an unstable cart, stand, or table.
■Do not use the projector near water or sources of heat.
■Use the type of power source indicated on the projector. If you are not 
sure of the power available, consult your dealer or power company.
■Place the projector near a wall outlet where the plug can be easily 
unplugged.
Placez l’appareil près d’une prise de courant où la fiche peut être débranchée 
facilement.
■Insert the projector’s three-wire grounding-type plug into a properly 
grounded outlet. If you have a two-prong outlet, contact an electrician 
to replace it. Do not hold the plug with wet hands.
■Take the following precautions for the plug. Failure to comply with 
these precautions could result in sparks or fire: Do not insert the plug 
into an outlet with dust present. Insert the plug firmly into the outlet.
■Do not overload wall outlets, extension cords, or integral convenience 
receptacles. This can cause fire or electric shock.
■Do not place the projector where the cord can be walked on. This may 
result in fraying or damage to the plug.
■Unplug the projector from the wall outlet before cleaning. Use a damp 
cloth for cleaning. Do not use liquid or aerosol cleaners.
■Do not block the slots and openings in the projector case. They provide 
ventilation and prevent the projector from overheating. Do not operate 
the projector on a sofa, rug, or other soft surface, or in a closed-in 
cabinet unless proper ventilation is provided. 
						

							180Notices
■Never push objects of any kind through the cabinet slots. Never spill 
liquid of any kind into the projector.
■Except as specifically explained in this User’s Guide, do not attempt to 
service this product yourself. Refer all servicing to qualified personnel. 
Opening or removing covers may expose you to dangerous voltages and 
other hazards.
■Unplug the projector from the wall outlet and refer servicing to qualified 
service personnel under the following conditions: When the power cord 
or plug is damaged or frayed. If liquid has been spilled into the 
projector, or if it has been exposed to rain or water. If it does not operate 
normally when you follow the operating instructions, or if it exhibits a 
distinct change in performance, indicating a need for service. If it has 
been dropped or the housing has been damaged.
■The lamp in this product contains mercury. Dispose of it according to 
local, state, or federal laws.
■Unplug the projector during lightning storms or when it will not be used 
for extended periods.
■Do not place the projector and/or remote control on top of 
heat-producing equipment or in a hot location.
■If you use the projector in a country other than where you purchased it, 
use the correct power cord for that country.
■Do not stand on the projector or place heavy objects on it.
■Do not use the projector outside of the required temperature range of 41 
to 95 °F (5 to 35 °C). Doing so may cause an unstable display and could 
lead to projector damage.
■Do not store the projector outside of the required temperature range of 
14 to 140 °F (–10 to 60 °C) or in direct sunlight for long periods of 
time. Doing so may cause damage to the case.
WARNING: The cords included with this product contain chemicals, 
including lead, known to the State of California to cause birth defects or 
other reproductive harm. Wash hands after handling. (Provided in accordance 
with Proposition 65 in Cal. Health & Safety Code §25249.5 et seq.)