Epson Powerlite 735c Multimedia Projector Users Guide

Fine-tuning the Projector75
5. Use the arrow buttons to change the setting for the selected 
option; the selection is indicated by an orange highlight. 
6. Press the 
Enter button to confirm the selection.
7. Do one of the following:
■To return to the previous menu, press ESC.
■To exit the menu system, press the Menu button (or press 
ESC more than once to exit).  
Adjusting the Image
The Video menu lets you make adjustments to the projected image. 
The options available in the menu depend on which...

76Fine-tuning the Projector3. Use the arrow buttons to highlight one of these options, then 
press 
Enter to select it:
■Position
Adjusts how the image fits on the screen. 
■Tracking (analog computer images only)
Removes unwanted vertical lines from a computer image by 
matching the projector’s internal clock to the computer 
display signal.
■Sync (analog computer images only)
Corrects fuzziness by synchronizing the projector with the 
tracking signal sent from the computer.
■Brightness
Lightens or...

Fine-tuning the Projector77
■Video Signal (video only)
Leave this setting at Auto unless you are using a 60-hertz PAL 
system (select 
PAL60). 
■Aspect Ratio (all sources except computer RGB) 
Sets the aspect ratio to 4:3 or 16:9 (letterbox format).
■Input Signal (computer RGB only)
Selects the appropriate source for the device connected to the 
Computer/Component Video port. 
■Auto Setup (computer RGB only)
When switching image sources, automatically optimizes the 
image. 
■Reset 
Returns all settings...

78Fine-tuning the Projector4. Use the arrow buttons to highlight one of these options, then 
press 
Enter to select it:
■Volume
■Tone
■Reset (returns the Audio settings to their default values)
5. After making any needed adjustments, press 
Menu to exit.
Creating Your Own Startup Screen
You can transfer any image from your computer or video source to the 
projector, and then use it as your startup screen. You can also use it as 
the screen displayed when the projector is not receiving a signal or 
when...

Fine-tuning the Projector79
4. Use the arrow buttons to select the area of the image you want to 
use. Then press 
Enter.
5. When you see the message “Select this image?” highlight 
Yes and 
press 
Enter. 
6. Use the arrow buttons to select a zoom rate (display size), and 
then press 
Enter. 
7. When the message “Do you save the user’s logo?” appears, select 
Yes and press Enter. Confirm as needed. 
Saving the logo may take a few moments. Do not use your 
projector or video source (computer, DVD player,...

80Fine-tuning the Projector
Customizing Projector Features
You can use the Setting menu to disable the projector’s sleep mode, 
adjust the image shape, and customize several other features.
1. Press the 
Menu button on the remote control. 
2. Use the   button to highlight 
Setting. You see this menu:
3. Press 
Enter to select the Setting menu. 
4. Use the arrow buttons to set the following options:
■Keystone
Lets you correct the shape of the image after the projector has 
been tilted upward. If you...

Fine-tuning the Projector81
■Color Mode Prompt
Sets whether the color mode indicator is displayed on the 
screen when you press the Color Mode button. 
■A/V Mute
Selects the screen color or image to display when you press 
the 
A/V Mute button. The logo setting displays an image that 
you previously transferred to the projector (see page 78).
■Sleep mode
When sleep mode is on, the projector turns off the lamp if it 
has not received any input signals for 30 minutes. Turn sleep 
mode off if you want the...

82Fine-tuning the Projector4. Use the arrow buttons to select one of the following options:
■Language
Select from nine languages to be used for the projector 
menus.
■Startup Screen
Turn on to display your captured image or logo whenever the 
projector starts (see page 78).
■Color Adjustment
Adjusts the color temperature of the projected image. Select 
Color Temp. to set a temperature between 5000 and 
10000 K. Select 
RGB to adjust individual red, green, and 
blue values, as shown. (Not available if...

Fine-tuning the Projector83
Viewing Lamp Usage and Other 
Information
Use the About menu to view information about the display settings of 
your computer and the number of hours the lamp has been used. 
1. Press the 
Menu button. You see the main menu.
2. Use the arrow buttons on the remote control to highlight 
About.
You see the lamp usage hours and various display settings on the 
right:
The life span of the lamp is about 1500 hours. If the number 
shown is close to 1500, make sure you have a spare...

84Fine-tuning the Projector
Restoring the Default Settings
The Reset All option lets you return all the projector settings to their 
default values.
Select 
Reset All and press the Enter button on the remote control to 
display the confirmation screen. Select 
Yes to reset all the default 
settings or 
No to cancel.