Epson Powerlite 735c Multimedia Projector Users Guide

Presenting from a Memory Card65
Inserting the Memory Card in the 
Projector
When done transferring your scenario to the memory card, follow 
these steps to insert it in the projector:
1. If necessary, insert the card into a 
PC card adapter. (ATA flash cards 
don’t require an adapter.)
2. Insert the card (with the 
adapter) into the projector 
as shown. The projector 
does not have to be turned 
off before inserting the 
card.  

66Presenting from a Memory Card
Removing the Card
When you’re done using the projector and want to remove the 
memory card, follow these steps. Make sure a scenario is not playing 
and the card is not in use (the access light next to the card slot is off) 
before removing it.
1. Press the button next to the card slot. 
The button pops out.
2. Press the button again. The memory card is released, and you can 
remove it from the slot in the projector. 
3. To remove the card from the adapter, 
simply pull it...

Presenting from a Memory Card67
Presenting the Scenario 
Once you’ve inserted the memory card, you can present your scenario:
1. Turn on the projector, if it’s not already on. 
■If your scenario is set to autorun, it will start as soon as the 
projector warms up. 
■If your scenario is not set to autorun, you need to start it 
manually. Continue with the following steps.
2. Select 
EasyMP as the source by pressing the Comp/EasyMP 
button on the remote control. You see this screen: 
Two types of icons...

68Presenting from a Memory Card
Editing Your Scenario on the Projector
You can modify your scenario using EasyMP on the projector. This 
lets you make last-minute changes, such as changing the order of your 
slides or hiding individual slides. These changes are not permanently 
saved with the scenario, but remain in effect only as long as you don’t 
remove the card or turn off the projector. Follow these steps:
1. Highlight the   scenario you want to edit, then press 
Enter. 
2. From the drop-down menu,...

Presenting from a Memory Card69
Creating a Slideshow on the Fly
If you have a folder on the memory card containing an assortment of 
images, you can display them as a slideshow. Your options for 
arranging the slideshow are more limited than when you create a 
scenario—for example, you won’t be able to include PowerPoint 
slides, just JPG images and bitmaps, and you won’t have much control 
over the order in which they’re displayed. However, this method 
quickly lets you display your images if you don’t...

70Presenting from a Memory Card
Changing Timing and Other Settings
For each folder on the memory card, you can set the display timing for 
your slides and change several other display settings. 
1. Select the  folder whose settings you want to change and press 
Enter.
2. From the drop-down menu, select 
Options. 
You see this screen:
3. Use the arrow keys to select from the following settings. After 
making a selection, press 
Enter to enable the change.
■Continuous Play
Determines whether to repeat the...

Presenting from a Memory Card71
■Mode switching
Lets you choose how to access EasyMP menu items from the 
remote control. In 
Guide mode, a drop-down menu appears 
whenever you press 
Enter. To access the menus in Quick 
mode
, you have to press the ESC key.
4. When you’re finished changing the settings, highlight 
OK on the 
screen and press 
Enter. Your changes are permanently saved with 
each folder—even if you turn off the projector or remove the 
memory card.  

72Presenting from a Memory Card 

Fine-tuning the Projector73
1
Fine-tuning the Projector 
You can use the projector’s on-screen menus to adjust the image, 
sound, and other features. You can also create your own startup screen 
and find out how long your lamp has been in use. This chapter covers 
the following information:
■Using the menu system
■Adjusting the image 
■Adjusting the sound 
■Creating your own startup screen
■Customizing projector features
■Viewing lamp usage and other information
■Restoring the default settings 

74Fine-tuning the Projector
Using the Menu System
You can use the buttons on the remote control to access the menus 
and change settings. Follow these steps:
1. To display the menu screen, press the 
Menu 
button on the remote control. 
You see a menu screen similar to the one shown 
below (the settings may be different from those 
shown here, depending on the selected input 
source):
The menus are listed on the left, and the options available for the 
highlighted menu are shown on the right.
2. Use the...